- DL manuals
- Canon
- Scanner
- imageCLASS MF6500 Series
- Service Manual
Canon imageCLASS MF6500 Series Service Manual - page 5
Introduction
The following rules apply throughout this Service Manual:
1. Each chapter contains sections explaining the purpose of specific functions and the relationship between electrical and mechanical systems with refer-
ence to the timing of operation.
In the diagrams,
represents the path of mechanical drive; where a signal name accompanies the symbol , the arrow
indicates the
direction of the electric signal.
The expression "turn on the power" means flipping on the power switch, closing the front door, and closing the delivery unit door, which results in
supplying the machine with power.
2. In the digital circuits, '1'is used to indicate that the voltage level of a given signal is "High", while '0' is used to indicate "Low".(The voltage value, how-
ever, differs from circuit to circuit.) In addition, the asterisk (*) as in "DRMD*" indicates that the DRMD signal goes on when '0'.
In practically all cases, the internal mechanisms of a microprocessor cannot be checked in the field. Therefore, the operations of the microprocessors
used in the machines are not discussed: they are explained in terms of from sensors to the input of the DC controller PCB and from the output of the
DC controller PCB to the loads.
The descriptions in this Service Manual are subject to change without notice for product improvement or other purposes, and major changes will be com-
municated in the form of Service Information bulletins.
All service persons are expected to have a good understanding of the contents of this Service Manual and all relevant Service Information bulletins and be
able to identify and isolate faults in the machine."
Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com
Summary of imageCLASS MF6500 Series
Page 1
Feb 22 2006 service manual mf6500 series download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 2
Download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 3
Application this manual has been issued by canon inc. For qualified persons to learn technical theory, installation, maintenance, and repair of products. This manual covers all localities where the products are sold. For this reason, there may be information in this manual that does not apply to you...
Page 4
Introduction symbols used this documentation uses the following symbols to indicate special information: symbol description indicates an item of a non-specific nature, possibly classified as note, caution, or warning. Indicates an item requiring care to avoid electric shocks. Indicates an item requi...
Page 5
Introduction the following rules apply throughout this service manual: 1. Each chapter contains sections explaining the purpose of specific functions and the relationship between electrical and mechanical systems with refer- ence to the timing of operation. In the diagrams, represents the path of me...
Page 6
Download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 7
Contents contents chapter 1 introduction 1.1 system construction ..................................................................................................................................1- 1 1.1.1 system construction .............................................................................
Page 8
Contents 2.1.9 network pcb Åiif equipped with network functionsÅj .............................................................................................2- 4 2.1.10 ncu pcb (if equipped with fax functions) ...........................................................................................
Page 9
Contents 4.4.4 drive unit................................................................................................................................................................. 4- 9 4.4.4.1 removing the drive unit ...............................................................................
Page 10
Contents 7.4 duplex unit................................................................................................................................................. 7- 4 7.4.1 outline...................................................................................................................
Page 11
Contents 8.4.4 fixing delivery paper sensor .................................................................................................................................. 8- 7 8.4.4.1 removing the delivery sensor ......................................................................................
Page 12
Contents 10.2 consumables.......................................................................................................................................... 10- 1 10.2.1 durables......................................................................................................................
Page 13
Contents chapter 14 service mode 14.1 service soft switch settings (sssw) .....................................................................................................14- 1 14.1.1 sssw-sw01: ........................................................................................................
Page 14
Contents pseudo rbt signal pattern off time length (long)> .................................................................................................14- 7 14.3.10 pseudo ci signal pattern off time length (long)> ....................................................................................
Page 15
Contents 14.7.5 error log list ..................................................................................................................................................... 14- 16 14.7.6 spec list ..................................................................................................
Page 16
Contents download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 17
Chapter 1 introduction download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 18
Download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 19
Contents contents 1.1 system construction ......................................................................................................................................................1-1 1.1.1 system construction .................................................................................
Page 20
Download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 21
Chapter 1 1-1 1.1 system construction 1.1.1 system construction 0011-4306 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl f-1-1 [1] host machine [2] cassette unit-m1 [3] hand set ct-25 *1 *1 the handset comes standard with the imageclass mf6550 ...
Page 22
Chapter 1 1-2 1.2 product specifications 1.2.1 names of parts 1.2.1.1 external view (front) 0011-3526 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl f-1-2 t-1-1 1.2.1.2 external view (rear) 0011-3527 laserbase mf6530 / / laserbase mf6540pl / la...
Page 23
Chapter 1 1-3 1.2.1.3 cross-section (main body) 0011-3528 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl f-1-4 t-1-3 1.2.1.4 cross section (adf) 0011-3529 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laser...
Page 24
Chapter 1 1-4 t-1-4 [1] registration roller [2] feed roller [3] separation pad [4] pickup roller [5] feed roller 1 [6] delivery roller download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 25
Chapter 1 1-5 1.2.2 using the machine 1.2.2.1 turning on the power switch 0011-4257 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl the machine possesses 2 power switches: main power switch and control power switch. Normally (i.E., unless the ma...
Page 26
Chapter 1 1-6 1.2.2.2 when turning off the main power switch 0011-4258 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl be sure to operate the main power switch while the processing/data lamp on the control panel is not lit. (turning off the main...
Page 27
Chapter 1 1-7 do not turn off the power switch or on/off switch on the control panel. (turning off the main power switch during downloading can make this machine inoperative.) f-1-8 download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 28
Chapter 1 1-8 1.2.2.3 control panel 0011-4259 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl f-1-9 f-1-10 [1] paper select indicator [16] [start] button [2] jam location indicator [17] [on/off] button (operation panel power switch) [3] lcd disp...
Page 29
Chapter 1 1-9 1.2.3 user mode items 1.2.3.1 common settings 0011-4287 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl memo: user modes of the usa model (copy + print + scan + fax + adf + network + pcl) are described. Menus and defaults may vary ...
Page 30
Chapter 1 1-10 *: indicates factory settings. 1.2.3.3 fax settings 0011-4290 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl *: indicates factory settings. 1.2.3.4 address book set. 0011-4291 laserbase mf6530 / / laserbase mf6540pl / laserbase m...
Page 31
Chapter 1 1-11 *: indicates factory settings. 1.2.3.6 timer settings 0011-4293 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl *: indicates factory settings. 1.2.3.7 adjust./cleaning 0011-4295 laserbase mf6530 / / laserbase mf6540pl / laserbase ...
Page 32
Chapter 1 1-12 *: indicates factory settings. 1.2.3.9 system settings 0011-4296 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl *: indicates factory settings. Additional functions available settings 1. Device info device name, location 2. Networ...
Page 33
Chapter 1 1-13 1.2.4 maintenance by the user 1.2.4.1 user maintenance items 0012-7145 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl t-1-5 1.2.4.2 cleaning 0012-7146 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560p...
Page 34
Chapter 1 1-14 when cleaning the fixing pressure roller, manually feed a4 paper. Memo: the time required for cleaning is about 100 seconds. 1) press the user mode key " " to enter the user mode. 2) using the left an right arrow keys, display the "adjust./cleaning" menu. 3) press the ok key. 4) using...
Page 35
Chapter 1 1-15 f-1-14 1.2.5.4 handling the laser unit 0011-3533 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl the laser scanner unit emits invisible laser light inside it. If exposed to laser light, the human eye can irreparably be damaged. Ne...
Page 36
Chapter 1 1-16 1.2.5.7 storing and handling the cartridge before unpacking 0011-5778 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl whether it is left packed or unpacked, or is fitted to the machine, the cartridge is subject to the effects of t...
Page 37
Chapter 1 1-17 1.2.6 product specifications 1.2.6.1 product specifications 0011-4328 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl copyboard stream reading, fixed reading body desktop light source type led lens type cs (contact sensor) photose...
Page 38
Chapter 1 1-18 1.2.6.2 adf specifications 0011-4342 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl 1.2.7 function list 1.2.7.1 printing speed 0011-4260 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbas...
Page 39
Chapter 1 1-19 supplement: - the above copy speed does not change if magnification is changed. - the above copy speed does not change irrespective of whether paper is supplied from the cassette, the manual feed tray, or from the cassette feeding module. - the copy speed may become down when the copi...
Page 40
Chapter 1 1-20 download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 41
Chapter 2 basic operation download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 42
Download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 43
Contents contents 2.1 construction ...................................................................................................................................................................2-1 2.1.1 functional construction........................................................................
Page 44
Download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 45
Chapter 2 2-1 2.1 construction 2.1.1 functional construction 0011-3537 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl the machine may be divided into the following 7 functional blocks. F-2-1 *1 : if equipped with printer functions. *2 : if equi...
Page 46
Chapter 2 2-2 2.1.2 functional block diagram 0011-3538 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl f-2-2 2.1.3 image processor pcb 0011-3549 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580...
Page 47
Chapter 2 2-3 the firmware stored in the flash rom may be either system or boot. Using the service support tool, the following 3 types of firmware may be upgraded: system and boot stored in the flash rom and the firmware stored ion pcl rom. F-2-3 2.1.4 dc controller pcb 0011-3550 laserbase mf6530 / ...
Page 48
Chapter 2 2-4 toner level detection mechanism while the machine is in wait state, the toner level detection signal (addtnr; based on the comparison of the developing bias output and the antenna output inside the cartridge) occurring when the developing ac bias is detected during normal rotation to m...
Page 49
Chapter 2 2-5 t-2-1 period definition purpose remarks wait (wait) from when the power is turned on until the main motor is turned on and stopped. The machine's mechanical and electrical states are checked. A check is made on the presence/absence of a cartridge and for paper remaining inside the mach...
Page 50
Chapter 2 2-6 download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 51
Chapter 3 original exposure system download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 52
Download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 53
Contents contents 3.1 basic constraction .........................................................................................................................................................3-1 3.1.1 specifications, control methods, and functions ....................................................
Page 54
Download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 55
Chapter 3 3-1 3.1 basic constraction 3.1.1 specifications, control methods, and functions 0012-7060 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl t-3-1 3.1.2 major components 0011-6038 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550...
Page 56
Chapter 3 3-2 3.2 basic sequence 3.2.1 basic sequence at power-on 0012-7070 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl f-3-2 f-3-3 3.2.2 basic sequence after depression of start key (book mode, one sheet of original) 0012-7074 laserbase mf6...
Page 57
Chapter 3 3-3 f-3-5 3.2.3 basic sequence after depression of start key (adf mode, one sheet of original) 0012-7077 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl f-3-6 f-3-7 3.3 various control 3.3.1 enlargement/reduction 3.3.1.1 magnification ...
Page 58
Chapter 3 3-4 3.3.2 dirt sensor control 3.3.2.1 outline 0012-7080 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl the machine changes the original read position or corrects the read image depending on the presence/absence of dust on the stream r...
Page 59
Chapter 3 3-5 t-3-2 3.4 parts replacement procedure 3.4.1 copyboard glass 3.4.1.1 removing the copyboard glass 0011-5275 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaser- base mf6560pl / / laserbase mf6580pl 1) remove the two screws [1], and then remove the glass holder [2]. 2) sli...
Page 60
Chapter 3 3-6 f-3-13 4) holding the belt, move the contact sensor unit to the cutout [1] in the reader frame. 5) remove the cable holder [2] and flexible cable [3] to remove the contact sensor [4]. F-3-14 3.4.4.2 procedure after replacing the cs 0012-7426 laserbase mf6530 / / laserbase mf6540pl / la...
Page 61
Chapter 4 original feeding system download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 62
Download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 63
Contents contents 4.1 basic constraction .........................................................................................................................................................4-1 4.1.1 outline............................................................................................
Page 64
Download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 65
Chapter 4 4-1 4.1 basic constraction 4.1.1 outline 0011-5773 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl the adf is a feeding device used exclusively for stream reading, and its series of operations (original pickup, feeding, delivery) is pe...
Page 66
Chapter 4 4-2 4.2 basic operation 4.2.1 outline of operation mode 0011-6040 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl this machine has 2 operation modes. This machine operates in the operation mode specified by the host machine to perform ...
Page 67
Chapter 4 4-3 f-4-4 f-4-5 4.2.2 document size detection 0011-6042 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl this machine detects the original size while feeding the original. (same-type mixed printing and banner paper printing are included...
Page 68
Chapter 4 4-4 t-4-3 4.2.3 paper pickup operation 0011-5775 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl the pickup unit consists of pickup and transport rollers. When the start key signal or original feed signal is input, the adf motor (m2001...
Page 69
Chapter 4 4-5 b. Reversal/feed 1 when the predetermined time has lapsed since the trailing edge of the fed original passed through the document edge sensor (sr2002), the adf motor (m2001) stops. Immediately after this, the adf motor turns in the reverse direction to feed the original to the registra...
Page 70
Chapter 4 4-6 4.3 detection jams 4.3.1 outline 0011-5776 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl this machine detects a jam using the sensors shown below. Document jam check timings are stored in the rom on the image processor pcb to che...
Page 71
Chapter 4 4-7 4.4 adf 4.4.1 adf 4.4.1.1 removing the adf 0011-5218 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaser- base mf6560pl / / laserbase mf6580pl 1) remove one screw [1], and then detach the reader rear cover (small). F-4-12 2) remove the three connectors [1] and one screw ...
Page 72
Chapter 4 4-8 f-4-16 4.4.2.3 detaching the open/close cover 0011-5224 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaser- base mf6560pl / / laserbase mf6580pl 1) remove the screw [1], and then remove the stopper. 2) remove the front and rear shafts [2] of the open/close cover, and th...
Page 73
Chapter 4 4-9 4.4.3 feed frame unit 4.4.3.1 removing the feed frame unit 0011-5238 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaser- base mf6560pl / / laserbase mf6580pl 1) detach the front cover, rear cover, open/close cover, and pickup tray. 2) disconnect the five connectors [1]....
Page 74
Chapter 4 4-10 base mf6560pl / / laserbase mf6580pl 1) remove the pickup/feed roller unit. 2) remove the screw [1], and then remove the roller bracket [2]. 3) remove the pickup roller [3]. F-4-24 4.4.7 feed roller 4.4.7.1 removing the feed roller 0011-5236 laserbase mf6530 / / laserbase mf6540pl / l...
Page 75
Chapter 4 4-11 4.4.10 document edge sensor 4.4.10.1 removing the original placement sensor 0011-6037 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaser- base mf6560pl / / laserbase mf6580pl 1) detach the front cover and open/close cover. 2) open the adf, remove the three screws [1], ...
Page 76
Chapter 4 4-12 f-4-36 3) remove the screw [1], and then remove the pickup solenoid [2]. F-4-37 4.4.14 registration solenoid 4.4.14.1 removing the registration solenoid 0011-5241 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaser- base mf6560pl / / laserbase mf6580pl 1) remove the fee...
Page 77
Chapter 4 4-13 download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 78
Download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 79
Chapter 5 laser exposure download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 80
Download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 81
Contents contents 5.1 overview/configuration ................................................................................................................................................5-1 5.1.1 specifications and control mechanism ...................................................................
Page 82
Download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 83
Chapter 5 5-1 5.1 overview/configuration 5.1.1 specifications and control mechanism 0012-7112 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl t-5-1 item description laser beam number of laser beams 2 beams scanner motor type of motor dc brushles...
Page 84
Chapter 5 5-2 5.1.2 main components 0011-3548 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl the laser scanner unit consists of the following major components: - laser unit, which serves as the source of laser beam. - laser scanner motor, equip...
Page 85
Chapter 5 5-3 5.2 parts replacement procedure 5.2.1 laser/scanner unit 5.2.1.1 removing the laser scanner unit 0011-5287 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaser- base mf6560pl / / laserbase mf6580pl the laser scanner was-factory adjusted. Never disassemble it. 1) detach th...
Page 86
Download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 87
Chapter 6 image formation download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 88
Download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 89
Contents contents 6.1 overview/configuration ................................................................................................................................................6-1 6.1.1 specifications and control mechanism ...................................................................
Page 90
Download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 91
Chapter 6 6-1 6.1 overview/configuration 6.1.1 specifications and control mechanism 0012-7116 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl t-6-1 6.2 image formation process 6.2.1 reproduction processes 0012-7057 laserbase mf6530 / / laserbase...
Page 92
Chapter 6 6-2 f-6-2 [1] latent image formation block step 1 primary charging (ac + negative dc) step 2 laser beam exposure [2] developing block step 3 development (ac + negative dc bias) [3] transfer block step 4 transfer (positive dc) step 5 separation (grounding) [4] fixing block step 6 fixing [5]...
Page 93
Chapter 6 6-3 6.3 parts replacement procedure 6.3.1 transfer charging roller 6.3.1.1 removing the transfer charging roller 0011-5296 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaser- base mf6560pl / / laserbase mf6580pl 1) remove the cartridge. 2) release the two hooks [1], and the...
Page 94
Download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 95
Chapter 7 pickup and feed system download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 96
Download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 97
Contents contents 7.1 overview/configuration ................................................................................................................................................7-1 7.1.1 outline.................................................................................................
Page 98
Download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 99
Chapter 7 7-1 7.1 overview/configuration 7.1.1 outline 0011-3560 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl the machine is not equipped with a paper width detection mechanism. It uses center reference, in which paper moves centered through ...
Page 100
Chapter 7 7-2 7.2 detection jams 7.2.1 jam detection outline 7.2.1.1 outline 0011-3561 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl the machine is equipped with 3 jam sensors and 1 jam switch used to motor the movement of paper. The presence/...
Page 101
Chapter 7 7-3 7.3 cassette pickup unit 7.3.1 outline 0011-4052 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl paper is picked up from the cassette under the control of the cpu on the dc controller pcb and using the drive of the main motor (m1)....
Page 102
Chapter 7 7-4 7.4 duplex unit 7.4.1 outline 0011-4061 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl ñ{ã@ÇÃóºñþããéÜìÆçÏÇÕÅadcÉrÉìÉgÉçÅ[ÉââÒòhäÓî¬ÇÃcpuêßå‰ÇÃLJÇýÅaÉÅÉcÉìÉÇÅ[É^(m1)ÇÃãÏìÆÇ…ÇÊǡǃçsÇ»ÇÌÇÍÇÈÅbï\ñþÇÃÉvÉä ÉìÉgÇ™èiÇÌÇËópéÜÇÃå„í[Ç™îréÜÉ...
Page 103
Chapter 7 7-5 7.5 manual feed pickup unit 7.5.1 outline 0011-4056 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl paper is picked up from the manual feed tray under the control of the cpu on the dc controller pcb and using the drive of the main ...
Page 104
Chapter 7 7-6 7.6 parts replacement procedure 7.6.1 cassette pickup roller 7.6.1.1 removing the cassette pickup roller 0011-5297 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaser- base mf6560pl / / laserbase mf6580pl 1) remove the cassette. 2) place the machine with the rear panel d...
Page 105
Chapter 7 7-7 f-7-10 2) release the claw [1], and then detach the sensor cover [2]. F-7-11 3) disconnect the connector [1], release the claw, and then remove the cassette paper sensor [2]. F-7-12 7.6.4 cassette pickup solenoid 7.6.4.1 removing the cassette pickup solenoid 0011-5381 laserbase mf6530 ...
Page 106
Chapter 7 7-8 f-7-16 3) while holding the manual separation pad [1], release the right hook [2] and then slide the right bearing [3]. 4) remove the manual pickup roller [4]. F-7-17 7.6.7 manual pickup sensor 7.6.7.1 removing the manual tray sensor 0011-5384 laserbase mf6530 / / laserbase mf6540pl / ...
Page 107
Chapter 7 7-9 [3]. F-7-22 6) remove the two screws [1] and move the guide [2] out of the way. 7) remove the drum shutter lever 1/2 [3]. F-7-23 8) remove one e-ring [1], two bearings [2], and left registration roller [3]. F-7-24 when reinstalling the right registration roller, the grounding spring [2...
Page 108
Chapter 7 7-10 f-7-27 3) remove the two bosses [1], disconnect the connector [2], and then slide the registration sensor unit [3] toward you to remove it. F-7-28 4) remove the registration sensor [1] by releasing the hook. F-7-29 7.6.12 duplex pick-up solenoid 7.6.12.1 removing the duplex pickup sol...
Page 109
Chapter 7 7-11 2) remove the three screws [1], and then remove the main motor [2]. 3) disconnect the connector [3]. F-7-33 [2] [3] [1] download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 110
Download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 111
Chapter 8 fixing system download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 112
Download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 113
Contents contents 8.1 overview/configuration ................................................................................................................................................8-1 8.1.1 specifications, control mechanisms, and functions.......................................................
Page 114
Download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 115
Chapter 8 8-1 8.1 overview/configuration 8.1.1 specifications, control mechanisms, and functions 0012-7178 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl t-8-1 8.1.2 outline 0011-4248 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 /...
Page 116
Chapter 8 8-2 8.2 various control mechanisms 8.2.1 controlling the temperature of the fixing unit 8.2.1.1 outline 0011-4252 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl the fixing film unit has a plate-shaped fixing heater built into it for h...
Page 117
Chapter 8 8-3 *1: target fixing temperature at startup. When the initial temperature of the fixing unit is high, the target temperature is lowered. In the continuous copy mode, the target temperature is lowered. *2: number of sheets controlled at the initial target temperature. If it is exceeded, th...
Page 118
Chapter 8 8-4 8.4 parts replacement procedure 8.4.1 fixing unit 8.4.1.1 removing the fixing unit 0011-5386 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaser- base mf6560pl / / laserbase mf6580pl 1) detach the rear cover and front cover, and then detach the rear-left cover. 2) remove...
Page 119
Chapter 8 8-5 f-8-9 8) remove the four screws [1], and then remove the fixing unit [2]. F-8-10 f-8-11 when reinstalling the fixing unit, align it with the mark [1]. F-8-12 if a parallelism error occurs during duplex printing, make the following ad- justment: attach the clamping plate [1] removed in ...
Page 120
Chapter 8 8-6 2) remove the three screws [1], and then remove the reversing guide [2] and sensor lever unit [3]. F-8-14 3) remove the two pressure spring [1], and then remove the two pressure plate [2]. F-8-15 see the illustration below when reinstalling the pressure springs [1] and plates [2]. F-8-...
Page 121
Chapter 8 8-7 4) release the hook and remove the gear [1]. The remaining part is the pressure roller [2]. F-8-21 precautions for installation of pressure roller when reinstalling the pressure roller, pay attention to the following: 1. The pressure roller bearing must be in touch with the leaf spring...
Page 122
Download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 123
Chapter 9 external and controls download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 124
Download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 125
Contents contents 9.1 control panel..................................................................................................................................................................9-1 9.1.1 outline.........................................................................................
Page 126
Download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 127
Chapter 9 9-1 9.1 control panel 9.1.1 outline 0012-7126 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl the machine's control panel consists of the following pcbs, and is controlled by the asic of the image processor pcb. F-9-1 9.2 fan 9.2.1 out...
Page 128
Chapter 9 9-2 9.3 power supply 9.3.1 power supply 9.3.1.1 outline 0011-5770 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl when the main power switch (sw1) is turned on, ac power is supplied to the low-voltage power supply circuit in the power ...
Page 129
Chapter 9 9-3 the power supply pcb is equipped with an over-current/over-voltage protection mechanism to prevent damage to the power circuit in the event of an over-current or over-voltage, as caused by a short circuit or the like on the load side. If the over-current/over-voltage protective mechani...
Page 130
Chapter 9 9-4 9.4 parts replacement procedure 9.4.1 external cover 9.4.1.1 detaching the reader rear cover (small) 0011-5392 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaser- base mf6560pl / / laserbase mf6580pl 1) remove the screw [1], and then detach the reader rear cover (small)...
Page 131
Chapter 9 9-5 f-9-6 9.4.1.4 detaching the reader left cover 0011-5395 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaser- base mf6560pl / / laserbase mf6580pl 1) open the left door. 2) remove the two screws [1], and then detach the reader left cover [2] as shown. F-9-7 9.4.1.5 detach...
Page 132
Chapter 9 9-6 f-9-10 9.4.1.8 detaching the right cover 0011-5399 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaser- base mf6560pl / / laserbase mf6580pl 1) detach the rear cover. 2) to release the hooks at the lower right of the machine, float the right side of the machine about 10 ...
Page 133
Chapter 9 9-7 f-9-12 9.4.1.9 detaching the front cover 0011-5400 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaser- base mf6560pl / / laserbase mf6580pl 1) remove the cassette. 2) using a flathead screwdriver, release the two claws [1] at the right and four hooks [2] at the top. 3) ...
Page 134
Chapter 9 9-8 f-9-15 9.4.3 image processor pcb 9.4.3.1 removing the image processor pcb 0011-5462 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaser- base mf6560pl / / laserbase mf6580pl 1) detach the rear cover. 2) remove the modular jack pcb. 3) disconnect the two connectors [1], a...
Page 135
Chapter 9 9-9 if automatic adjustment fails, "ng" appears. Perform the following procedure: clean the platen guide of the dadf and the document glass of the host ma- chine, and then retry auto adjustment. 9.4.4 dc controller pcb 9.4.4.1 removing the dc controller pcb 0011-5464 laserbase mf6530 / / l...
Page 136
Chapter 9 9-10 9.4.8 modem pcb 9.4.8.1 removing the modem pcb 0011-5468 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaser- base mf6560pl / / laserbase mf6580pl 1) detach the rear cover. 2) disconnect the two connectors [1], and then release the cable from the clamp. 3) remove the th...
Page 137
Chapter 9 9-11 2) disconnect the connector [1], release the two hooks [2], and then remove the heat discharge fan [3]. F-9-30 9.4.13 speaker 9.4.13.1 removing the speaker 0011-5493 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaser- base mf6560pl / / laserbase mf6580pl 1) detach the ...
Page 138
Download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 139
Chapter 10 maintenance and inspection download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 140
Download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 141
Contents contents 10.1 periodically replaced parts .......................................................................................................................................10-1 10.1.1 periodically replaced parts .............................................................................
Page 142
Download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 143
Chapter 10 10-1 10.1 periodically replaced parts 10.1.1 periodically replaced parts 0011-5784 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl the machine does not have parts that require periodical replacement. 10.2 consumables 10.2.1 durables 0...
Page 144
Download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 145
Chapter 11 measurement and adjustments download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 146
Download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 147
Contents contents 11.1 scanning system ........................................................................................................................................................11-1 11.1.1 procedure after replacing the cs ...................................................................
Page 148
Download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 149
Chapter 11 11-1 11.1 scanning system 11.1.1 procedure after replacing the cs 0012-7427 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaser- base mf6560pl / / laserbase mf6580pl after replacing the contact sensor (cs), go through the following steps to perform inter-channel output corr...
Page 150
Chapter 11 11-2 11.4 adf 11.4.1 outline 11.4.1.1 outline 0011-7337 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaser- base mf6560pl / / laserbase mf6580pl this machine has the following adjustment items. Make the necessary ad- justments after replacing each part. T-11-1 11.4.1.2 pre...
Page 151
Chapter 11 11-3 9) using the numeric keys, change the value to determine the optimum value. Next, press the ok key. (default: 32) do not change the adjustment value excessively. 11.4.3.2 adjusting the horizontal registration 0011-7341 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kase...
Page 152
Download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 153
Chapter 12 correcting faulty images download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 154
Download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 155
Contents contents 12.1 initial checkup...........................................................................................................................................................12-1 12.1.1 site environment .................................................................................
Page 156
Download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 157
Chapter 12 12-1 12.1 initial checkup 12.1.1 site environment 0011-5791 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl a. There must be a source of power whose voltage is as specified (+/-10%). The power plug must never be disconnected day and n...
Page 158
Chapter 12 12-2 - check whether the main power switch and the power switch on the operation pane are turned on. - check the power cables and signal cables of options are connected properly. - check whether no fuse on pcbs is blown. - check whether the user uses the machine properly. 12.1.6 others 00...
Page 159
Chapter 12 12-3 12.2 outline of electrical components 12.2.1 clutch/solenoid/motor/fan 12.2.1.1 list of clutches/solenoids/motors/fans 0011-5808 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl t-12-1 f-12-1 t-12-2 symbol name function part no. C...
Page 160
Chapter 12 12-4 f-12-2 12.2.2 sensor/switch 12.2.2.1 list of sensors 0011-5809 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl t-12-3 f-12-3 t-12-4 symbol name function part no. Connection jack no. Jam code sr401 cs hp sensor detects the cs home...
Page 161
Chapter 12 12-5 f-12-4 12.2.3 others 12.2.3.1 list of lamps, heaters, and others 0011-5810 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl t-12-5 f-12-5 sr2003 registration sensor detects registration paper. Wg8-5696 j406 (analog processor pcb) ...
Page 162
Chapter 12 12-6 there are no parts applicable to adf. Download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 163
Chapter 12 12-7 download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 164
Download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 165
Chapter 13 error code download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 166
Download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 167
Contents contents 13.1 error code..................................................................................................................................................................13-1 13.1.1 list of error codes.............................................................................
Page 168
Download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 169
Chapter 13 13-1 13.1 error code 13.1.1 list of error codes 0011-6947 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl t-13-1 display code detail code main cause/symptom countermeasure e000 0000 startup error the temperature detected by the main o...
Page 170
Chapter 13 13-2 13.2 jam code 13.2.1 jam codes (main body) 0011-7062 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl t-13-2 13.2.2 jam codes (adf) 0011-7059 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / lase...
Page 171
Chapter 13 13-3 13.3.3 service error code 13.3.3.1 service error code 0012-5782 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl t-13-5 #0018 [tx/rx] auto call initiation has failed. #0037 [rx] image memory overflow at time of reception has occur...
Page 172
Chapter 13 13-4 ##0764 [tx] at time of ecm transmission, the procedural signal has been transmitted more than specified after transmission of pps- eom. ##0765 [tx] at time of ecm transmission, no meaningful signal is received after transmission of pps-eop, causing the procedural signal to be transmi...
Page 173
Chapter 14 service mode download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 174
Download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 175
Contents contents 14.1 service soft switch settings (sssw)........................................................................................................................14-1 14.1.1 sssw-sw01:.......................................................................................................
Page 176
Contents 14.3.7 ........................................................................................................................................................... 14-7 14.3.8 .......................................................................................... 14-7 14.3.9 signal patter...
Page 177
Contents 14.5.2.12 ....................................................................................................................14-12 14.5.2.13 ....................................................................................................................14-12 14.5.2.14 ....................
Page 178
Download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 179
Chapter 14 14-1 14.1 service soft switch settings (sssw) 14.1.1 sssw-sw01: 14.1.1.1 list of functions 0011-4093 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl t-14-1 14.1.1.2 detailed discussions of bit 0 0011-4094 laserbase mf6530 / / laserbas...
Page 180
Chapter 14 14-2 any of the following error codes may be indicated at time of transmission ##0100, ##0280, ##0281, ##0750, ##0753, ##0754, ##0755, ##0758, ##0759, ##0760, ##0763 ##0764, ##0765, ##0768, ##0769,##0770, ##0773, ##0775, ##0778, ##0780, ##0783, ##0785, ##0788 14.1.3.3 detailed discussions...
Page 181
Chapter 14 14-3 the machine will stop the ongoing communication if the transmission/reception of a single original page takes 32 min or more. To use the timer for a purpose other than this function, refer to the tables that follow, and select an appropriate time length. When 'do not enable' is selec...
Page 182
Chapter 14 14-4 14.1.7.2 detailed discussions of bit 2 0011-4109 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl use it to specify whether to convert or not convert an inch-configuration resolution into a millimeter-configuration resolution for ...
Page 183
Chapter 14 14-5 14.1.9.2 detailed discussions of bit 5 0011-4124 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl when "detect with the new method" is selected, tone is detected for 3.5 seconds before call origination in order to discriminate bet...
Page 184
Chapter 14 14-6 14.3 numeric parameter settings (numeric param.) 14.3.1 0011-4147 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl t-14-14 14.3.2 0011-4148 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserb...
Page 185
Chapter 14 14-7 14.3.6 0011-4152 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl set the t1 timer for the receiver (wait time after dis transmission starts until a significant signal is received). 14.3.7 0011-4153 laserbase mf6530 / / laserbase ...
Page 186
Chapter 14 14-8 if any operation error occurs after changing the setting value, change the setting value to the original one. 14.4.2 0011-4166 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl this value is used when automatic scan position adjust...
Page 187
Chapter 14 14-9 14.4.10 0011-4178 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl adjust the position at which horizontal scanning of a document fed from the adf starts. The larger the adjustment value, the narrower the top margin of the image b...
Page 188
Chapter 14 14-10 1: foolscap 2: officio 3: e_officio 4: g_ltr_r 5: a_ltr_r 14.5 printer function settings (printer) 14.5.1 service soft switch settings (sssw) 14.5.1.1 sssw-sw05 14.5.1.1.1 list of functions 0011-4190 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / /...
Page 189
Chapter 14 14-11 during printing. Implementation of this mode would degrade the throughput. 14.5.1.2.5 detailed discussions of bit 5 0012-7581 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl select whether to enable or disable silent mode. Selec...
Page 190
Chapter 14 14-12 14.5.2.3 0011-4198 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl adjust the top registration margin of paper picked from cassettes. The larger the adjustment value, the wider the top margin of the image becomes. 14.5.2.4 0011-...
Page 191
Chapter 14 14-13 14.6 counter indication (counter) 14.6.1 counters 0011-4243 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl this copier is furnished with a maintenance/supplies counter set (drbl-1), which can be used to gain rough measures of w...
Page 192
Chapter 14 14-14 14.7 report output (report) 14.7.1 report output 0011-4211 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl the table below lists the kinds of reports that are supported. 14.7.2 system data list 0011-4213 laserbase mf6530 / / las...
Page 193
Chapter 14 14-15 f-14-2 *1: tx, number of total pages transmission. *2: total number of pages transmitted/received according to original size. *3: rx, number of total pages reception. *4: total number of pages transmitted and received for each modem speed *5: total number of pages transmitted/receiv...
Page 194
Chapter 14 14-16 f-14-3 *1: service error code. *2: start time, date and time (in 24-hr notation). *3: other party, telephone number sent by the other party. *4: maker code, manufacturer code. *5: machine code, model code. *6: bit 1 through bit 96 of dis, dcs, or dtc that has been received. *7: bit ...
Page 195
Chapter 14 14-17 f-14-4 jam history description (jam) item explanation [1] number the larger the number of a jam, the more recently it has occurred. [2] jam date date of jam occurrence [3] jam time [4] jam recovery time [5] location 3: host machine, 4: adf, 5: finisher [6] occurrence category 0: hos...
Page 196
Chapter 14 14-18 14.7.6 spec list 0011-4216 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl f-14-5 [1] type setting [2] print speed [3] memory size [4] rom version (main/boot/econt/option cassette/duplex unit/finisher) [5] activation function on...
Page 197
Chapter 14 14-19 [14] backup battery availability 14.7.7 service label 0011-4217 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl enter the value given in the service label affixed to the rear cover when it has been replaced with a new one. F-14-...
Page 198
Chapter 14 14-20 14.8 download (download) 14.8.1 download 0011-4218 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl the following parts of this unit can be upgraded by executing download mode using the service support tool (sst) (for more inform...
Page 199
Chapter 14 14-21 14.11 test mode (test) 14.11.1 overview 14.11.1.1 outline 0011-4223 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl test mode must be executed by keeping track the flow of menu items appearing on the lcd. Menu items in test mode...
Page 200
Chapter 14 14-22 (1) relay test [1] - [2] (1) relay test 1 ncu relay (and switch) on/off test (2) relay test 2 230 v common ncu test (2) freq test [0] - [6] frequency test (0) freq test 462hz (1) freq test 1100hz (2) freq test 1300hz (3) freq test 1500hz (4) freq tsst 1650hz (5) freq test 1850hz (6)...
Page 201
Chapter 14 14-23 14.11.2 dram test 14.11.2.1 d-ram test 0011-4225 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl d-ram test((1) d-ram) press the numeric keypad key 1 on the test mode menu to select the d-dram test. Press numeric keypad keys 1 a...
Page 202
Chapter 14 14-24 14.11.3 scan test 14.11.3.1 scan test ((2) scan test) 0011-7361 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl scan test ((2) scan test) press the numeric keypad key 2 on the test mode menu to select the ccd test. Press numeric...
Page 203
Chapter 14 14-25 press '1'or '2' on the keypad on the modem test menu to select relay test mode. Use the keypad to operate the various relays of the ncu. '2' on the keypad is used for 230v machine. Numeric keypad key 1 the input key and relay are shown below: f-14-9 numeric keypad key 2 the input ke...
Page 204
Chapter 14 14-26 a press on '6' on the keypad from the modem test menu selects the tonal signal/dtmf signal reception 0 test. In this signal, the tonal signal/dtmf signal received from the telephone line terminal can be checked to find out if it was detected by the modem. F-14-11 v.34 g3 signal tran...
Page 205
Chapter 14 14-27 sensor test (6-3: sensor) this mode is used to verify the status of the unit sensors from lcd indications. Press numeric keypad key 3 on the function test menu to select the sensor test. Lcd indications change as the associated sensors turn on and off. F-14-12 6-3:senor [1] - [8] se...
Page 206
Chapter 14 14-28 f-14-13 adf feed test (adf feed test) adf operation verification mode. Press numeric keypad key 4 on the function test menu to select the adf feed test. Place a document on the document platen and press the start key to transfer the document at the speed matched to the scan resoluti...
Page 207
Chapter 14 14-29 f-14-15 operation key test (2) correspondence diagram f-14-16 the flow of operation panel testing is shown below. [l] [o] [m] [n] [f] [k] [c] [i] [h] [g] [q] [a] [b] [d] [p] [j] [e] lcd [7] [6] [8] [3] [5] [4] [1] [0] [2] 01: [a] 02: [b] 03: [c] 04: [d] 05: [e] 06: [f] 07: [g] 08: [...
Page 208
Chapter 14 14-30 f-14-17 line signal reception test (9: line detect) press numeric keypad key 9 on the faculty menu to select the line signal reception test. In this test, verify the successful operations of the ncu signal sensor and the frequency counter. Menu 1 detects the ci state, while menu 3 d...
Page 209
Chapter 15 upgrading download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 210
Download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 211
Contents contents 15.1 outline........................................................................................................................................................................15-1 15.1.1 overview of upgrade..........................................................................
Page 212
Download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 213
Chapter 15 15-1 15.1 outline 15.1.1 overview of upgrade 0011-5797 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl this machine and options can be upgraded by downloading system software programs from the personal computer (hereafter called as th...
Page 214
Chapter 15 15-2 5) select the drive in which the system cd is inserted, and then click the "search" button. F-15-2 6) a list of system software programs contained in the system cd is displayed. Uncheck the checkboxes of unnecessary folders and system software programs, and then click the "register" ...
Page 215
Chapter 15 15-3 f-15-4 15.2.2 connection 0011-5800 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl 1) turn off the main power switch of this machine, and then disconnect the cables connected to this machine. 2) connect usb connector on the back ...
Page 216
Chapter 15 15-4 3) select "mfp" in "target selection", and then select "e243" in "model list". F-15-7 4) double-click the "system" folder in "model list" to check the system software version. Select "usb" in "interface", and then click the "start" button. F-15-8 5) turn on the power switch of the ho...
Page 217
Chapter 15 15-5 10) when connection is complete, the following screen appears. Click the ok button. F-15-10 11) click "system software download" on the selecting a job screen. Memo: this machine does not use the "upload the backup data" and "download the backup data" functions not displayed on the s...
Page 218
Chapter 15 15-6 f-15-12 13) when downloading starts, the progress of downloading is displayed by the progress bar. F-15-13 14) while the received data is being written to the flash rom after completion of downloading, the following screen is displayed: f-15-14 download free service manual and resett...
Page 219
Chapter 15 15-7 never turn off the power switch of the machine while the data is being written to the flash rom. If it becomes impossible to start this machine after turning its power switch off, the image processor pcb must be replaced. 15) when writing of the data to the flash rom is complete, its...
Page 220
Chapter 15 15-8 f-15-17 18) click the "exit" button to terminate sst. F-15-18 19) confirm the massage "rom write ok" indicated on the control panel of the host machine, and then turn off/on the main power switch. 15.3.2 downloading the boot software 15.3.2.1 downloading procedure 0011-5802 laserbase...
Page 221
Chapter 16 service tools download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 222
Download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 223
Contents contents 16.1 service tools..............................................................................................................................................................16-1 16.1.1 special tools....................................................................................
Page 224
Download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 225
Chapter 16 16-1 16.1 service tools 16.1.1 special tools 0011-5806 laserbase mf6530 / / laserbase mf6540pl / laserbase mf6550 / kaserbase mf6560pl / / laserbase mf6580pl in addition to the standard tools set, you will need the following special tools for servicing of the machine: t-16-1 key to notati...
Page 226
Download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 227
Feb 22 2006 download free service manual and resetter printer at http://printer1.Blogspot.Com.
Page 228
Download free service manual and resetter printer at http://printer1.Blogspot.Com download free service manual and resetter printer at http://printer1.Blogspot.Com download free service manual and resetter printer at http://printer1.Blogspot.Com download free service manual and resetter printer at h...