- DL manuals
- Condre
- Software
- AutoTracer NAS
- User's And Configuration Manual
Condre AutoTracer NAS User's And Configuration Manual
Summary of AutoTracer NAS
Page 1
Condre autotracer nas user’s and configuration manual thursday, september 26, 2002 version 1.000
Page 2
Condre autotracer nas •••• user’s and installation manual 09/26/02 (2 of 22) © copyright by condre •••• 2002 © copyright by software engineering corporation (sencor®) •••• 1994 - 2002 this information contained in this document is subject to change without notice, and is provided "as is" with no war...
Page 3
Condre autotracer nas •••• user’s and installation manual 09/26/02 (3 of 22) table of contents 1. Introduction...................................................................................................................................................................... 4 1.1 definitions and a...
Page 4
Condre autotracer nas •••• user’s and installation manual 09/26/02 (4 of 22) 1. Introduction this manual is the ultimate reference for users of the autotracer nas product line. The manual has been designed keeping the user in mind. Users seek information based on tasks that they need to perform or p...
Page 5
Condre autotracer nas •••• user’s and installation manual 09/26/02 (5 of 22) 2. Power this section of the document describes how to power up and power down (shutdown) the autotracer nas appliance. An appliance is a device that does not require an external computer. Appliances are meant to be left po...
Page 6
Condre autotracer nas •••• user’s and installation manual 09/26/02 (6 of 22) you may precede the line with the text: “ http:// ” (without the double quotes). Use the proper tcp/ip address of the appliance. The one shown in the example differs from the one on your appliance. If in doubt, consult with...
Page 7
Condre autotracer nas •••• user’s and installation manual 09/26/02 (7 of 22) figure 2 log on screen after the “ ok ” button is clicked the following window is displayed..
Page 8
Condre autotracer nas •••• user’s and installation manual 09/26/02 (8 of 22) figure 3 initial screen please keep in mind that the actual screen may look somewhat different depending on the version of the operating system used in the appliance. • from the “ start ” menu select “ start\shutdown ”. The...
Page 9
Condre autotracer nas •••• user’s and installation manual 09/26/02 (9 of 22) • click on the “ok” button. The appliance will initiate the shutdown sequence. As part of the shut down the following confirmation dialog box will be displayed: figure 5 shut down confirmation • click on the “yes” button. T...
Page 10
Condre autotracer nas •••• user’s and installation manual 09/26/02 (10 of 22) • in the “ server ” field enter the current ip of the appliance. The “ 216.17.32.188 ” tcp/ip default address must be specified. • select a “ size ” for the window that will be created when opening a session via tsweb. Kee...
Page 11
Condre autotracer nas •••• user’s and installation manual 09/26/02 (11 of 22) figure 7 log on screen after the “ ok ” button is clicked the following window is displayed..
Page 12
Condre autotracer nas •••• user’s and installation manual 09/26/02 (12 of 22) figure 8 initial screen please keep in mind that the actual screen may look somewhat different depending on the version of the operating system used in the appliance. We now need to get to the window used to configure the ...
Page 13
Condre autotracer nas •••• user’s and installation manual 09/26/02 (13 of 22) figure 9 control panel windows • double click on the selected icon. The “ network and dial-up connections ” window appears. The following figure illustrates the contents of the terminal server window at this point in time....
Page 14
Condre autotracer nas •••• user’s and installation manual 09/26/02 (14 of 22) figure 11 local area connection status window • click on the “ properties ” button on the “ local area connection status ” window. The “ local area connection properties ” window appears. The following figure illustrates t...
Page 15
Condre autotracer nas •••• user’s and installation manual 09/26/02 (15 of 22) figure 13 internet protocol (tcp/ip) properties • in the last window select the “ use the following ip address ” radio button. • enter the proper tcp/ip address, subnet mask and default gateway in the specified fields. • t...
Page 16
Condre autotracer nas •••• user’s and installation manual 09/26/02 (16 of 22) a manual restore is defined as the operation of taking the contents of one (1) or cd/dvd volumes and copying them into one (1) destination folder on the network. The user must have access top the destination folder. Please...
Page 17
Condre autotracer nas •••• user’s and installation manual 09/26/02 (17 of 22) figure 15 browsing for logos the following figure illustrates the web page after a new logo has been added. Figure 16 new logo added 5.2 export the export operation is used to take one (1) or more files and export them to ...
Page 18
Condre autotracer nas •••• user’s and installation manual 09/26/02 (18 of 22) figure 17 export page the first step of an export operation is to define a root path for the export operation. The contents of this folder and any folders under are candidates to be written to a cd/dvd volume. • enter the ...
Page 19
Condre autotracer nas •••• user’s and installation manual 09/26/02 (19 of 22) pending, the one with the highest priority (nine (9)) will be performed before other operations with less priority (one (1)). The standard (default) priority is five (5). Count this field is used to indicate the number of ...
Page 20
Condre autotracer nas •••• user’s and installation manual 09/26/02 (20 of 22) figure 21 home page the home page is displayed when the gui is started via a web browser. 5.4 import this section of the document describes the steps that need to be taken and the windows that are displayed during an impor...
Page 21
Condre autotracer nas •••• user’s and installation manual 09/26/02 (21 of 22) figure 23 import add • select the number of volumes to import on the right pane of the window. Make sure the appliance is idle before clicking on the “ continue ” button. Make sure the cd/dvd volumes to be imported are loa...
Page 22
Condre autotracer nas •••• user’s and installation manual 09/26/02 (22 of 22) the following figure illustrates a queue with a single order. Figure 26 status with order after an order is completed the entry is removed from the screen. The entry is removed if the order successfully or unsuccessfully c...