Congatec conga-IA5 User Manual

Other manuals for conga-IA5: User Manual

Manual is about: Thin Mini-ITX Based On Intel Apollo Lake SoCs

Page of 59

Download

Print this page

Bookmark us

conga-IA5 Thin Mini-ITX SBC

Detailed Description Of The congatec Thin Mini-ITX Based On Intel® Apollo Lake SoCs

User's Guide

Revision 0.1 (

Preliminary

)

1 2 3 4 5 6 7 Next › »

Summary of conga-IA5

Page 1
Conga-ia5 thin mini-itx sbc detailed description of the congatec thin mini-itx based on intel® apollo lake socs user's guide revision 0.1 ( preliminary ).
Page 3
Copyright © 2017 congatec ag ia50m01 3/59 preface this user's guide provides information about the components, features and connectors available on the conga-ia5 thin mini-itx single board computer. Disclaimer the information contained within this user’s guide, including but not limited to any produ...
Page 4
Copyright © 2017 congatec ag ia50m01 4/59 symbols the following symbols are used in this user's guide: warning warnings indicate conditions that, if not observed, can cause personal injury. Caution cautions warn the user about how to prevent damage to hardware or loss of data. Note notes call attent...
Page 5
Copyright © 2017 congatec ag ia50m01 5/59 trademarks product names, logos, brands, and other trademarks featured or referred to within this user’s guide, or the congatec website, are the property of their respective trademark holders. These trademark holders are not affiliated with congatec ag, our ...
Page 6
Copyright © 2017 congatec ag ia50m01 6/59 certification congatec ag is certified to din en iso 9001 standard. Technical support congatec ag technicians and engineers are committed to providing the best possible technical support for our customers so that our products can be easily used and implement...
Page 7
Copyright © 2017 congatec ag ia50m01 7/59 contents 1 introduction ............................................................................. 10 1.1 mini-itx concept ..................................................................... 10 1.2 conga-ia5 ................................................
Page 8
Copyright © 2017 congatec ag ia50m01 8/59 6.4 congatec board controller (cbc) ............................................. 51 6.4.1 fan control .............................................................................. 51 6.4.2 power loss control ...................................................
Page 9
Copyright © 2017 congatec ag ia50m01 9/59 list of tables table 1 conga-ia5 commercial variants ............................................... 12 table 2 conga-ia5 industrial variants ................................................... 12 table 3 cooling/io shield ......................................
Page 10: Introduction
Copyright © 2017 congatec ag ia50m01 10/59 1 introduction 1.1 mini-itx concept the mini-itx form factor provides engineers and manufacturers with a standardized ultra compact platform for development. With a footprint of 170mm x 170mm, this scalable platform promotes the design of highly integrated,...
Page 11
Copyright © 2017 congatec ag ia50m01 11/59 1.2.1 options information the conga-ia5 is currently available in six variants. This user’s guide describes all of these variants. The tables below show the different configurations available. Check for the part no. That applies to your product. This will t...
Page 12
Copyright © 2017 congatec ag ia50m01 12/59 1.2.2 optional accessories table 3 cooling/io shield article part no. Description conga-ia50/csp 052830 passive cooling solution with thin mini-itx height for open die variants (celeron ® and pentium ® ) conga-ia50/i-csp 052831 passive cooling solution with...
Page 13: Specification
Copyright © 2017 congatec ag ia50m01 13/59 2 specification 2.1 feature list table 7 feature summary form factor based on thin mini-itx form factor (170mm x 170mm) processor intel ® apollo lake atom™, pentium ® and celeron ® memory two memory sockets (located on the top side of the conga-ia5) with su...
Page 14
Copyright © 2017 congatec ag ia50m01 14/59 power management acpi 4.0 compliant with battery support. Also supports suspend to ram (s3) configurable tdp ultra low standby power consumption, deep sx other features thermal and voltage monitoring, cmos battery, beeper congatec standard bios (also possib...
Page 15
Copyright © 2017 congatec ag ia50m01 15/59 2.3 mechanical dimensions • 170mm x 170mm • maximum height: 20mm 2.4 supply voltage power • 12v - 24v dc ± 10% 2.5 power consumption the power consumption values were measured with the following setup: • conga-ia5 • conga-ia5 cooling solution • microsoft ® ...
Page 16
Copyright © 2017 congatec ag ia50m01 16/59 table 9 power consumption values the tables below provide additional information about the power consumption data for each of the conga-ia5 variants offered. The values are recorded at various operating modes. Part no. Memory size h.W rev. Bios rev. Os (64-...
Page 17
Copyright © 2017 congatec ag ia50m01 17/59 2.7 environmental specifications temperature (commercial variants) operation: 0° to 60°c storage: -20° to +80°c temperature (industrial variants) operation: -40° to 85°c storage: -40° to +85°c humidity operation: 10% to 90% storage: 5% to 95% caution the ab...
Page 18: Block Diagram
Copyright © 2017 congatec ag ia50m01 18/59 3 block diagram * 1 located at the bottom side. * 2 optional feature. 2x so-dimm ddr3l lpc gpo smb hda speaker hd audio cs4207 congatec board controller battery br2032 front panel hd audio intrusion header 2x fan sbm 3 batt. Mgmt * 2 feature connector com p...
Page 19: Cooling Solution
Copyright © 2017 congatec ag ia50m01 19/59 4 cooling solution the conga-ia5 sbc offers ultra low power boards with high computing performance and outstanding graphics. Due to its low power consumption, the sbc generates less heat and therefore requires less active cooling, allowing the use of quiete...
Page 20
Copyright © 2017 congatec ag ia50m01 20/59 4.1 cooling installation assembly instruction: • flip over the sbc and locate the position of the cpu. • place retention frame on the bottom side of the board with insulating foil facing the pcb and standoffs inserted to pcb's mounting holes. • remove the c...
Page 21
Copyright © 2017 congatec ag ia50m01 21/59 4.2 csp dimensions csp dimensions for celeron ® and pentium ® open die variants (pn: 052830 — conga-ia5/csp) 19.75 21.2 75 75 note all measurements are in millimeters. Recommended maximum torque for cooling solution screws is 0.3 nm. Mechanical system assem...
Page 22
Copyright © 2017 congatec ag ia50m01 22/59 csp dimensions for atom™ lidded die variants (pn: 052831 — conga-ia5/i-csp) 19.75 21.2 75 75 note all measurements are in millimeters. Recommended maximum torque for cooling solution screws is 0.3 nm. Mechanical system assembly mounting shall follow the val...
Page 23: Connector Description
Copyright © 2017 congatec ag ia50m01 23/59 5 connector description 5.1 power supply you can power the conga-ia5 sbc with: • a 12v-24v laptop type dc power supply on connector x43 (default for commercial variants / assembly option for industrial variants) • a 4-pin power supply on connector x44/x48 (...
Page 24
Copyright © 2017 congatec ag ia50m01 24/59 5.1.2 power supply (internal connector) the conga-ia5 offers a straight internal 4-pin power connector (x44) by default or a straight connector (x48) by assembly option. This connector makes it possible to use customized power supply cables/connector and al...
Page 25
Copyright © 2017 congatec ag ia50m01 25/59 5.1.3 optional sbm 3 power connector (internal connector) the conga-ia5 offers an optional sbm 3 power connector (only bom option). When this connector (x46) is populated, you can power the conga- ia5 sbc with an sbm battery kit. The battery kit requires tw...
Page 26
Copyright © 2017 congatec ag ia50m01 26/59 table 15 sbm 3 signal (x45 connector) pinout description pin function 1 gnd 2 i2c_dat 3 i2c_clk 4 batlow# 5 sus_stat# 6 pm_slp_s3# 7 pm_slp_s5# 8 pwrbtn# connector type x45 : 1.25mm, 1x8 pin, picoblade 5.1.4 pwr_ok signal with the pwr_ok signal on the featu...
Page 27
Copyright © 2017 congatec ag ia50m01 27/59 table 17 single-color power led led state description acpi state off sleeping or power-off (not running) s3, s5 steady green running s0 note for the front panel pinout description, see section 6.1 “front panel connector”. 5.2 cmos battery/rtc the conga-ia5 ...
Page 28
Copyright © 2017 congatec ag ia50m01 28/59 5.3.1 rear audio connectors the conga-ia5 has a high definition audio codec (cirrus logic cs4207) mounted on it. The line output signals and the microphone signals are respectively routed to connectors x22 (line-out) and x20 (mic-in) on the rear side. The d...
Page 29
Copyright © 2017 congatec ag ia50m01 29/59 5.3.2.1 stereo speaker header the first analog line input channels (left and right) of the cirrus logic cs4207 hda audio codec are routed via a tpa2012d2 amplifier to internal stereo speaker (connector x21). The amplifier offers a maximum wattage of 2.1w pe...
Page 30
Copyright © 2017 congatec ag ia50m01 30/59 5.3.2.3 front panel hd audio the front panel hd audio (line2 and mic2) signals of the cirrus logic cs4207 hda audio codec are routed to connector x18. The pinout description of the connector is shown below: table 22 front panel hd audio (connector x18) pino...
Page 31
Copyright © 2017 congatec ag ia50m01 31/59 5.4.3 spi bus the spi signals are connected to the onboard spi flash and also to the feature connector (x35). The spi signals on the feature connector provides the ability to boot the conga-ia5 from external flash. This however requires a customized adapter...
Page 32
Copyright © 2017 congatec ag ia50m01 32/59 5.5.2 cpu/system fan connector & power configuration the conga-ia5 supports the connection of 5v or 12v cooling fans. The signals of the cpu and system fans are routed to 4-pin connectors x34 and x37 respectively. Use jumper x36 to select the cpu fan voltag...
Page 33
Copyright © 2017 congatec ag ia50m01 33/59 5.6 universal serial bus (usb) the conga-ia5 provides 6 usb ports — 4 usb ports on the rear side and 2 usb ports internally. All usb ports are routed directly from the soc. Usb 3.0 port 4 apollo lake soc 2x usb 2.0 rear ports (connector x16) 2x usb 3.0/2.0 ...
Page 34
Copyright © 2017 congatec ag ia50m01 34/59 5.6.1 rear usb connectors the conga-ia5 offers four usb ports on the rear side — two usb 2.0 ports on connector x16 and two usb 3.0 ports on connector x17. Connector type x16, x17: two type a, dual port usb connectors note connectors x16 and x17 have maximu...
Page 35
Copyright © 2017 congatec ag ia50m01 35/59 5.6.3 internal usb 2.0 connector the conga-ia5 offers one usb 2.0 port on connector x15 (internal header). Connector type x15: 2.54mm, 1x5 pin header, pin 1 removed note congatec offers a cable for connector x15 (see section 1.2.2 “optional accessories"). F...
Page 36
Copyright © 2017 congatec ag ia50m01 36/59 5.8 sata interfaces 5.8.1 sata / satadom ports the conga-ia5 provides two sata iii ports supporting data rates up to 6 gb/s. Satadom is featured on connector cn1 — to enable it, set sata power to satadom in the bios configuration. Do not connect a sata devi...
Page 37
Copyright © 2017 congatec ag ia50m01 37/59 5.8.2 sata power the conga-ia5 provides an internal sata power for hard drives on connector x11. This connector supplies 3.3v, 5v and 12v. Connector type x11: 15 pin sata connector note the voltage rails +3.3v, +5v and +12v have maximum current of 1.5a each...
Page 38
Copyright © 2017 congatec ag ia50m01 38/59 5.8.4 m.2 slot the conga-ia5 offers an m.2, type 3042/2242 slot (x12) for connecting a sata or pcie ssd and wwan device. This connector shares the soc's sata1 signals with cn2. Cn2 will not function whenever a device is inserted into the m.2 connector. Ther...
Page 39
Copyright © 2017 congatec ag ia50m01 39/59 pin signal pin signal 53 refclk- 54 pewake# 55 refclk+ 56 n.C 57 gnd 58 n.C 59 n.C 60 n.C 61 n.C 62 n.C 63 n.C 64 n.C 65 n.C 66 n.C 67 reset# 68 susclk 69 config_1 70 +3.3v 71 gnd 72 +3.3v 73 gnd 74 +3.3v 75 config_2 connector type x12: m.2 type b slot (com...
Page 40
Copyright © 2017 congatec ag ia50m01 40/59 5.9.2 lvds the conga-ia5 offers lvds interface on connector x33 — a standard 40 pin lvds connector. The lvds signals are sourced from the soc's ddi stream via a multiplexer. The interface is located on the top side of the sbc and supports 24-bit dual channe...
Page 41
Copyright © 2017 congatec ag ia50m01 41/59 note congatec offers cables and adapter for the lvds interface (see section 1.2.2 “optional accessories”). For more information, contact congatec technical solution department. 5.9.3 embedded display port (edp) the conga-ia5 provides an edp interface at the...
Page 42
Copyright © 2017 congatec ag ia50m01 42/59 connector type x29: 0.5mm, 40 pin, aces mating connector: aces 88441-40 or aces 50204-40 note congatec offers cables and adapter for the edp interface (see section 1.2.2 “optional accessories/cables”). For more information, contact the congatec technical so...
Page 43
Copyright © 2017 congatec ag ia50m01 43/59 5.9.3.2 backlight/panel power selection the conga-ia5 supports different voltages for the panel and backlight connectors. With jumper x30, you can set the backlight voltage to 5v or 12v. With jumper x31, you can set the panel voltage to 3.3v, 5v or 12v. Tab...
Page 44
Copyright © 2017 congatec ag ia50m01 44/59 5.9.3.3 monitor off connector the monitor off connector (x28) offers the possibility to turn off the displays attached to the conga-ia5. Table 34 monitor off (connector x28) pinout description pin function 1 monitor_off# 2 gnd connector type x28: 2.54mm, 2 ...
Page 45
Copyright © 2017 congatec ag ia50m01 45/59 b9 n.C. A9 +3.3v b10 +3.3v aux a10 +3.3v b11 wake# a11 pcie_rst# key b12 n.C. A12 gnd b13 gnd a13 pcie_clk+ b14 pcie_tx0+ a14 pcie_clk- b15 pcie_tx0- a15 gnd b16 gnd a16 pcie_rx0+ b17 prsnt2# a17 pcie_rx0- b18 gnd a18 gnd connector type x8: pcie x1 note the...
Page 46
Copyright © 2017 congatec ag ia50m01 46/59 pin signal pin signal 9 gnd 10 n.C. 11 refclk- 12 n.C. 13 refclk+ 14 n.C. 15 gnd 16 n.C. 17 pull down resistor (1m) 18 gnd 19 n.C. 20 w_disable# 21 gnd 22 perst# 23 pern0 24 +3.3vaux 25 perp0 26 gnd 27 gnd 28 +1.5v 29 gnd 30 smb_clk 31 petn0 32 smb_data 33 ...
Page 47
Copyright © 2017 congatec ag ia50m01 47/59 5.10.3 mini pcie (full size) the conga-ia5 offers an mpcie slot on connector x9. This connector shares the soc's pcie 0 signals with connector x8 (x1 pcie slot), via a multiplexer. When an mpcie device is attached to the mpcie slot (connector x9), the soc a...
Page 48
Copyright © 2017 congatec ag ia50m01 48/59 5.11 micro-sim slot the conga-ia5 offers a micro-sim slot on connector x10 to insert a sim card. Table 37 micro-sim slot (connector x10) pinout description pin signal description c1 pwr power c2 rst reset c3 clk clock c4 n.A not available c5 gnd ground c6 v...
Page 49
Copyright © 2017 congatec ag ia50m01 49/59 5.12.1 pci express routing the diagram below shows how the pcie lanes are routed to the pcie connectors. Pcie x1 slot connector x8 mpcie slot connector x9 pcie2 mux usb signals note: the pcie x1 slot (x8) will not function if you insert an mpcie card into c...
Page 50: Additional Features
Copyright © 2017 congatec ag ia50m01 50/59 6 additional features 6.1 front panel connector the conga-ia5 sbc supports front panel features such as power button, status leds and reset button via connector x39 — a 10-pin internal header. This connector offers one power supply pin (3.3v). The signals f...
Page 51
Copyright © 2017 congatec ag ia50m01 51/59 6.2 case open intrusion connector the conga-ia5 provides connector x23 for case-open intrusion detection. Table 39 case open intrusion (connector x23) pinout description pin function 1 gnd 2 caseopen# connector type x23: 2.54mm, 1x2 pin header 6.3 trusted p...
Page 52
Copyright © 2017 congatec ag ia50m01 52/59 6.4.2 power loss control the cbc has full control of the power-up of the sbc, therefore can be used to specify the behavior of the system after an ac power loss condition. Supported modes are “always on”, “remain off” and “last state”. 6.4.3 board informati...
Page 53
Copyright © 2017 congatec ag ia50m01 53/59 6.5.3 oem post logo this feature allows system designers to replace the congatec post logo displayed in the upper left corner of the screen during bios post with their own bios post logo. Use the congatec system utility cgutil 1.5.4 or later to replace/add ...
Page 54
Copyright © 2017 congatec ag ia50m01 54/59 for more information about this subject visit the congatec website and view the following documents: • congatec battery management interface specification • battery system design guide • conga-sbm 3 user’s guide 6.7 api support (cgos) congatec provides an a...
Page 55
Copyright © 2017 congatec ag ia50m01 55/59 6.11 feature connector the conga-ia5 provides an internal 50 pol. 2mm pin header as feature connector. The pinout is described below: table 40 feature connector (connector x35) pinout description pin signal pin signal 1 +v5s 2 gnd 3 lad0 4 lad1 5 lad2 6 lad...
Page 56: Conga-Ia5 Mechanical Drawing
Copyright © 2017 congatec ag ia50m01 56/59 7 conga-ia5 mechanical drawing 170 170 x43 x44 x48 x26 x27 x6 x7 x17 x16 x22 x20 x21 x18 x8 x19 m18 x2 x1 x42 x25 x24 x15 x35 x32 x30 x31 x33 x36 x14 x34 x23 x39 cn1 x28 x47 x11 x37 x45 cn2 x38 x46 x12 m37 x9 x5 x3 x4.
Page 59: Industry Specifications
Copyright © 2017 congatec ag ia50m01 59/59 10 industry specifications the list below provides links to industry specifications that apply to congatec ag modules. Specification link low pin count interface specification, revision 1.0 (lpc) http://developer.Intel.Com/design/chipsets/industry/lpc.Htm u...