- DL manuals
- Congatec
- Motherboard
- conga-IA5
- User Manual
Congatec conga-IA5 User Manual
Summary of conga-IA5
Page 1
Conga-ia5 thin mini-itx sbc detailed description of the congatec thin mini-itx based on intel® apollo lake socs user's guide revision 1.0
Page 2
Copyright © 2017 congatec ag ia50m10 2/59 revision history revision date (yyyy.Mm.Dd) author changes 0.1 2017.07.19 beu • preliminary release 1.0 beu • updated image of the conga-ia5 on the title page • removed android from supported os in section 2.2 "supported operating systems" • added power cons...
Page 3
Copyright © 2017 congatec ag ia50m10 3/59 preface this user's guide provides information about the components, features and connectors available on the conga-ia5 thin mini-itx single board computer. Disclaimer the information contained within this user’s guide, including but not limited to any produ...
Page 4
Copyright © 2017 congatec ag ia50m10 4/59 symbols the following symbols are used in this user's guide: warning warnings indicate conditions that, if not observed, can cause personal injury. Caution cautions warn the user about how to prevent damage to hardware or loss of data. Note notes call attent...
Page 5
Copyright © 2017 congatec ag ia50m10 5/59 trademarks product names, logos, brands, and other trademarks featured or referred to within this user’s guide, or the congatec website, are the property of their respective trademark holders. These trademark holders are not affiliated with congatec ag, our ...
Page 6
Copyright © 2017 congatec ag ia50m10 6/59 certification congatec ag is certified to din en iso 9001 standard. Technical support congatec ag technicians and engineers are committed to providing the best possible technical support for our customers so that our products can be easily used and implement...
Page 7
Copyright © 2017 congatec ag ia50m10 7/59 contents 1 introduction ............................................................................. 10 1.1 mini-itx concept ..................................................................... 10 1.2 conga-ia5 ................................................
Page 8
Copyright © 2017 congatec ag ia50m10 8/59 6.4.1 fan control .............................................................................. 51 6.4.2 power loss control .................................................................. 51 6.4.3 board information ..........................................
Page 9
Copyright © 2017 congatec ag ia50m10 9/59 list of tables table 1 conga-ia5 commercial variants ............................................... 11 table 2 conga-ia5 industrial variants ................................................... 11 table 3 cooling/io shield ......................................
Page 10: Introduction
Copyright © 2017 congatec ag ia50m10 10/59 1 introduction 1.1 mini-itx concept the mini-itx form factor provides engineers and manufacturers with a standardized ultra compact platform for development. With a footprint of 170mm x 170mm, this scalable platform promotes the design of highly integrated,...
Page 11
Copyright © 2017 congatec ag ia50m10 11/59 1.2.1 options information the conga-ia5 is currently available in six variants. This user’s guide describes all of these variants. The tables below show the different configurations available. Check for the part no. That applies to your product. This will t...
Page 12
Copyright © 2017 congatec ag ia50m10 12/59 1.2.2 optional accessories table 3 cooling/io shield article part no. Description conga-ia50/csp 052830 passive cooling solution with thin mini-itx height for open die variants (celeron ® and pentium ® ) conga-ia50/i-csp 052831 passive cooling solution with...
Page 13: Specification
Copyright © 2017 congatec ag ia50m10 13/59 2 specification 2.1 feature list table 7 feature summary form factor based on thin mini-itx form factor (170mm x 170mm) processor intel ® apollo lake atom™, pentium ® and celeron ® memory two memory sockets (so-dimm non-ecc ddr3l modules, data rates up to 1...
Page 14
Copyright © 2017 congatec ag ia50m10 14/59 note some of the features mentioned above are optional. Check the part number of your module and compare it to the options information table in section 1.2.1 to determine what options are available on your particular module. 2.2 supported operating systems ...
Page 15
Copyright © 2017 congatec ag ia50m10 15/59 2.3 mechanical dimensions • 170mm x 170mm • maximum height: 20mm 2.4 supply voltage power • 12v - 24v dc ± 10% note depending on your bios settings, the conga-ia5 may start immediately after power is supplied. Caution the absolute maximum rating of the inpu...
Page 16
Copyright © 2017 congatec ag ia50m10 16/59 table 8 measurement description the power consumption values were recorded during the following system states: system state description comment s0: minimum value lowest frequency mode (lfm) with minimum core voltage during desktop idle. S0: maximum value hi...
Page 17
Copyright © 2017 congatec ag ia50m10 17/59 2.6 supply voltage battery power table 10 cmos battery power consumption rtc @ voltage current -10 o c 3v dc 2.05 µa 20 o c 3v dc 2.94 µa 70 o c 3v dc 11.8 µa note do not use the cmos battery power consumption values listed above to calculate cmos battery l...
Page 18: Block Diagram
Copyright © 2017 congatec ag ia50m10 18/59 3 block diagram 2x so-dimm ddr3l lpc gpo smb hda speaker hd audio cs4207 congatec board controller battery br2032 front panel hd audio intrusion header 2x fan sbm 3 batt. Mgmt feature connector com0 rs232 com1 rs232/rs485 cctalk super i/o nct6102d 2x ttl re...
Page 19: Cooling Solution
Copyright © 2017 congatec ag ia50m10 19/59 4 cooling solution the conga-ia5 sbc offers ultra low power boards with high computing performance and outstanding graphics. Due to its low power consumption, the sbc generates less heat and therefore requires less active cooling, allowing the use of quiete...
Page 20
Copyright © 2017 congatec ag ia50m10 20/59 4.1 cooling installation assembly instruction: • flip over the sbc and locate the position of the cpu. • place retention frame on the bottom side of the board with insulating foil facing the pcb and standoffs inserted to pcb's mounting holes. • remove the c...
Page 21
Copyright © 2017 congatec ag ia50m10 21/59 4.2 csp dimensions celeron ® and pentium ® lidless die variants (pn: 052830) 19.75 21.2 75 75 note all measurements are in millimeters. Recommended maximum torque for cooling solution screws is 0.3 nm. Mechanical system assembly mounting shall follow the va...
Page 22
Copyright © 2017 congatec ag ia50m10 22/59 atom™ lidded die variants (pn: 052831) 19.75 21.2 75 75 note all measurements are in millimeters. Recommended maximum torque for cooling solution screws is 0.3 nm. Mechanical system assembly mounting shall follow the valid din/is0 specifications..
Page 23: Connector Description
Copyright © 2017 congatec ag ia50m10 23/59 5 connector description 5.1 power supply connectors the conga-ia5 provides a dc power jack (optional for industrial variants) and a 4-pin atx connector. Optionally, the conga-it6/come can provide sbm 3 connectors. 5.1.1 dc power jack the commercial conga-ia...
Page 24
Copyright © 2017 congatec ag ia50m10 24/59 table 13 x48 pinout description pin signal description 1 +12v - 24v power supply +12v-24v 2 +12v - 24v power supply +12v-24v 3 gnd ground 4 gnd ground x48: 2x2 pins, 4.2mm pitch (pn: 41500604) 5.1.3 sbm 3 connectors optionally, the conga-ia5 provides connec...
Page 25
Copyright © 2017 congatec ag ia50m10 25/59 5.1.4 pwr_ok signal with the pwr_ok signal on the feature connector (x35), the user can control the sbc's start-up process. When this signal is set to low, the sbc is kept in reset until the pwr_ok signal is asserted. When the signal is asserted (set to hig...
Page 26
Copyright © 2017 congatec ag ia50m10 26/59 5.2 audio connectors the audio signals of the following connectors are routed from a high definition audio (hda) codec (cirrus logic cs4207). 5.2.1 microphone jack the conga-ia5 provides a microphone jack (x20). Table 18 x20 pinout description pin signal de...
Page 27
Copyright © 2017 congatec ag ia50m10 27/59 5.2.3 stereo speakers header the conga-ia5 provides a stereo speakers header (x21). The signals are amplified (ti tpa2012d2), providing 2x 2.1w into 4ohm at 5v. Table 20 x21 pinout description pin signal description 1 outl- left channel negative differentia...
Page 28
Copyright © 2017 congatec ag ia50m10 28/59 5.2.5 front panel audio header the conga-ia5 provides a front panel audio header (x18). Table 22 x18 pinout description pin signal description 1 mic2_l 2nd analog stereo microphone input—left channel 2 gnd ground 3 mic2_r 2nd analog stereo microphone input—...
Page 29
Copyright © 2017 congatec ag ia50m10 29/59 5.3 communication bus the conga-ia5 supports both smbus and i 2 c compliant devices. 5.3.1 smbus the smbus signals are available in different locations on the conga-ia5, including the feature connector (x35) described in section 6.11 of this document. 5.3.2...
Page 30
Copyright © 2017 congatec ag ia50m10 30/59 5.4.1 uart headers the conga-ia5 provides two uart headers (x24, x25) via a super io (nct6102d). The uart ports can be used under windows 10 and linux without a special driver. Uart header x24 (com 0) fully supports rs-232. Uart header x25 (com 1) supports ...
Page 31
Copyright © 2017 congatec ag ia50m10 31/59 5.4.2 cpu and system fan header the conga-ia5 provides a cpu fan header (x36) and system fan header (x38). Use jumper x36 to select the cpu fan voltage. Use jumper x38 to select the system fan voltage. Table 25 x36 pinout description pin signal 1 gnd 2 vcc ...
Page 32
Copyright © 2017 congatec ag ia50m10 32/59 5.5 universal serial bus (usb) the conga-ia5 provides six usb ports. All usb ports are routed directly from the soc. Usb 3.0 port 4 apollo lake soc 2x usb 2.0 rear ports (connector x16) 2x usb 3.0/2.0 rear ports (connector x17) 1x usb 3.0/2.0 internal port ...
Page 33
Copyright © 2017 congatec ag ia50m10 33/59 5.5.1 usb 2.0 ports the conga-ia5 provides two usb 2.0 ports (x16) and two usb 3.0 ports (x17). Connector type x16, x17: two type a, dual port usb connectors note the usb 2.0 ports have a maximum current of 0.5a. The usb 3.0 ports have a maximum current of ...
Page 34
Copyright © 2017 congatec ag ia50m10 34/59 note the maxmimum current is 1.2a. Only one usb port is supported on this connector. The signals for the second usb port are not connected. Congatec offers a cable for this connector (see section 1.2.2 “optional accessories"). For more information, contact ...
Page 35
Copyright © 2017 congatec ag ia50m10 35/59 5.6 gigabit ethernet ports the conga-ia5 provides two gigabit ethernet ports (connectors x6 and x7) on the rear side. The two gigabit ethernet interfaces are supported via the intel gigabit ethernet controller i211 (commercial variants) or i210 (industrial ...
Page 36
Copyright © 2017 congatec ag ia50m10 36/59 5.7.2 sata / satadom ports the conga-ia5 provides two sata 6gb/s ports (cn1, cn2). You can enable satadom on sata port 0 (cn1) in bios setup. The sata port 1 (cn2) is shared with m.2 card slot (x12). You can switch the sata1 signals to either the sata port ...
Page 37
Copyright © 2017 congatec ag ia50m10 37/59 5.7.4 m.2 3042/2242 card slot the conga-ia5 provides an m.2 3042/2242 card slot (x12) for connecting a sata or pcie ssd and wwan device. This connector shares the soc's sata1 signals with cn2. You can have either sata1 (default) or pcie4 signals on the m.2 ...
Page 38
Copyright © 2017 congatec ag ia50m10 38/59 pin signal pin signal 53 refclk- 54 pewake# 55 refclk+ 56 n.C 57 gnd 58 n.C 59 n.C 60 n.C 61 n.C 62 n.C 63 n.C 64 n.C 65 n.C 66 n.C 67 reset# 68 susclk 69 config_1 70 +3.3v 71 gnd 72 +3.3v 73 gnd 74 +3.3v 75 config_2 connector type x12: m.2 type b slot (com...
Page 39
Copyright © 2017 congatec ag ia50m10 39/59 5.8 display interfaces the conga-ia5 supports three simultaneous displays—two dp++ and an lvds or edp displays. 5.8.1 dp++ ports the conga-ia5 sbc provides two dp++ ports (x26, x27), supporting dp, hdmi and dvi displays. Connector type x26, x27: dual displa...
Page 40
Copyright © 2017 congatec ag ia50m10 40/59 5.8.2 lvds header the conga-ia5 offers an lvds header (x33). The lvds signals are sourced from the soc's ddi stream via a multiplexer. The header supports 24-bit dual channel, selectable backlight voltage, vesa color mappings, automatic panel detection and ...
Page 41
Copyright © 2017 congatec ag ia50m10 41/59 5.8.3 edp connector the conga-ia5 provides an edp connector (x29). In order to use it, change the "active lfp configuration" in the bios setup menu to "edp". Table 33 x29 pinout description pin signal pin signal 1 n.C 21 vcc_lcd 2 gnd 22 n.C 3 edp_tx3- 23 g...
Page 42
Copyright © 2017 congatec ag ia50m10 42/59 5.8.3.1 backlight power header the conga-ia5 provides a backlight power header (x32). The power budget of bklt_pwr (pins 3 and 4) is limited to 1.5a. Table 34 x32 pinout description pin signal name description 1 lvds_bklt_en backlight enable 2 lvds_bklt_ctr...
Page 43
Copyright © 2017 congatec ag ia50m10 43/59 5.8.3.2 backlight/panel power selection the conga-ia5 supports different voltages for the panel and backlight connectors. With jumper x31, you can set the backlight voltage to 5v or 12v. With jumper x30, you can set the panel voltage to 3.3v, 5v or 12v. Tab...
Page 44
Copyright © 2017 congatec ag ia50m10 44/59 5.8.3.3 monitor off header the conga-ia5 provides a monitor off header (x28). You can use it to turn off the attached displays. Table 37 x28 pinout description pin function 1 monitor_off# 2 gnd connector type x28: 2x1 pins, 2.54mm pitch 5.9 pci express conn...
Page 45
Copyright © 2017 congatec ag ia50m10 45/59 b10 +3.3v aux a10 +3.3v b11 wake# a11 pcie_rst# key b12 n.C. A12 gnd b13 gnd a13 pcie_clk+ b14 pcie_tx0+ a14 pcie_clk- b15 pcie_tx0- a15 gnd b16 gnd a16 pcie_rx0+ b17 prsnt2# a17 pcie_rx0- b18 gnd a18 gnd connector type x8: pcie x1 card slot note you can us...
Page 46
Copyright © 2017 congatec ag ia50m10 46/59 pin signal pin signal 19 n.C. 20 w_disable# 21 gnd 22 perst# 23 pern0 24 +3.3vaux 25 perp0 26 gnd 27 gnd 28 +1.5v 29 gnd 30 smb_clk 31 petn0 32 smb_data 33 petp0 34 gnd 35 gnd 36 usb_d- 37 gnd 38 usb_d+ 39 +3.3vaux 40 gnd 41 +3.3vaux 42 n.C 43 msata_mpcie_d...
Page 47
Copyright © 2017 congatec ag ia50m10 47/59 5.9.3 mini pcie card slot (full-size) the conga-ia5 provides a mini pcie slot (x9) for a full-size card. This connector shares the soc's pcie 2 signals with connector x8 (pcie x1 slot), via a multiplexer. When an mpcie device is attached to the mpcie slot (...
Page 48
Copyright © 2017 congatec ag ia50m10 48/59 5.10 micro-sim card slot the conga-ia5 provides a micro-sim card slot (x10) connected to the uim interface of the mpcie slot by default. Table 40 x10 pinout description pin signal description c1 pwr power c2 rst reset c3 clk clock c4 n.A not available c5 gn...
Page 49
Copyright © 2017 congatec ag ia50m10 49/59 5.11.1 pci express routing the diagram below shows how the pcie lanes are routed to the pcie connectors. Note you can use either the pcie x1 (x8) or mpcie slot (x9). The pcie x1 slot (x8) will not function if you insert a card into the mpcie slot (x9). Opti...
Page 50: Additional Features
Copyright © 2017 congatec ag ia50m10 50/59 6 additional features 6.1 front panel header the conga-ia5 provides a front panel header (x39). Table 41 x39 pinout description pin function description 1 hdd_power_led+ hard disk power led with pull-up resistor to 3.3v. 2 fp_led+ power led (main color) 3 s...
Page 51
Copyright © 2017 congatec ag ia50m10 51/59 6.3 security features the conga-ia5 provides a firmware tpm 2.0 (intel ® ptt). Follow the steps below to enable or disable the firmware tpm 2.0: • enter the bios setup menu (see section 10.1 "navigating the bios setup menu") • navigate to advanced setup men...
Page 52
Copyright © 2017 congatec ag ia50m10 52/59 6.4.3 board information the cbc provides a rich data-set of manufacturing and board information such as serial number, ean number, hardware and firmware revisions, and so on. It also keeps track of dynamically changing data like runtime meter and boot count...
Page 53
Copyright © 2017 congatec ag ia50m10 53/59 6.5.4 oem bios code / data with the congatec embedded bios, it is possible for system designers to add their own code to the bios post process. The congatec embedded bios first calls the oem code before handing over control to the os loader. Except for cust...
Page 54
Copyright © 2017 congatec ag ia50m10 54/59 6.7 api support (cgos) congatec provides an api that allows application software developers to easily integrate the bios customization features mentioned above into their code. The cgos api (congatec operating system application programming interface) is th...
Page 55
Copyright © 2017 congatec ag ia50m10 55/59 6.11 feature connector the conga-ia5 provides a feature connector (x35). Table 43 x35 pinout description pin signal name pin type voltage level onboard termination description 1 +5v power 5v +5v runtime power output, 500ma max. 2 gnd ground 3 lad0 i/o 3.3v ...
Page 56
Copyright © 2017 congatec ag ia50m10 56/59 pin signal name pin type voltage level onboard termination description 28 gpi3 input 3.3v pu 10k general purpose input at board controller 29 gpi4 input 3.3v pu 10k general purpose input at board controller 30 gpi5 input 3.3v pu 10k general purpose input at...
Page 57: Conga-Ia5 Mechanical Drawing
Copyright © 2017 congatec ag ia50m10 57/59 7 conga-ia5 mechanical drawing 170 170 x43 x44 x48 x26 x27 x6 x7 x17 x16 x22 x20 x21 x18 x8 x19 m18 x2 x1 x42 x25 x24 x15 x35 x32 x30 x31 x33 x36 x14 x34 x23 x39 cn1 x28 x47 x11 x37 x45 cn2 x38 x46 x12 m37 x9 x5 x3 x4.
Page 58: Bios Setup Description
Copyright © 2017 congatec ag ia50m10 58/59 8 bios setup description 8.1 navigating the bios setup menu the bios setup menu shows the features and options supported in the congatec bios. To access and navigate the bios setup menu, press the or key during post. The right frame displays the key legend....
Page 59: Industry Specifications
Copyright © 2017 congatec ag ia50m10 59/59 9 industry specifications the list below provides links to industry specifications that apply to congatec ag modules. Specification link low pin count interface specification, revision 1.0 (lpc) http://developer.Intel.Com/design/chipsets/industry/lpc.Htm un...