Conlan CT2000 Master Manual - page 2
2
Introduction
CT2000 is a flexible keypad, which can be used for many different purposes.
One CT2000 can handle maximum 100 different user codes.
No matter what purpose the CT2000 is used for (e.g. access keypad to alrm
systems On/Off switch, or control of electric lock), the method of operation is
always the same
The keypad is operated / activated as follows:
Enter a user code e.g.
and confirm by pressing .
If the entered code is correct and valid the CT2000 activates when you press
.
System Changes
Generally it is your system provider, who changes the systems settings for you.
However, changes like adding, changing and deleting user codes can be made
by the user himself, after entering the Master Code. This code does not activate
the keypad.
Master Code
The Master Code is a restricted Service Code, which only enables you to change
user codes (positions 00 - 99). The Master Code should be used by the person
who is responsible for everyday operation of the system and therefore must be
able to add, change and delete user codes.
The Master Code is not programmed form the factory, it is therefore very im-
portant that you have it set by your system provider before taking over the sys-
tem.
Each user shall be assigned a user number (positions 00 - 99) and a personal
user code (1 - 8 digits). Example: User 08 has a user code
.