Connect P500 User Manual - page 6
6(13)
P500 USER MANUAL
TYPICAL MRS FUNCTIONS
INDVIDUAL CALL
Individual call refers to calls to individual radio stations. A called-up station has
a specific call number, similar to the specific telephone number of a telephone
unit. Your P500 may have up to three individual call numbers.
The tone receivers are called I, J & K in the P500 Coach Program !
GROUP CALL
A group number is a 5-digit call number that has been programmed in several
radio stations to make it possible for, for example, the base to call them all at
the same time. When a group call is received, all members of the group can
hear what is said on the channel in use.
Your P500 station may be programmed to receive calls on three different
group numbers, meaning, for example, that you may belong to three different
working teams.
The tone receivers are called S, L & M in the P500 Coach Program !
OPEN MONITORING
”Open monitoring” means that you can listen continuously to radio traffic on
one channel with your station whilst at the same time being ready to receive
calls on other channels, if there is no carrier on the selected channel. Turn on
the function on/off with the key LS.
WHC CALL
If your station is on but you do not answer an incoming call, the station may
receive and store the call number of the calling station. The function is called
WHC (”Who Has Called ?”).
Your station can store as many as 15 WHC calls. A specific number is only
stored once, even if the same calling party sends several WHC calls. When
your station has received a WHC call, the symbol ”arrow up & down” on the
display flashes.
1996-06-06