Connect P500 User Manual - page 8
8(13)
P500 USER MANUAL
OPERATION BASICS
MAIN MENU
When your P500 station is in stand-by mode, the display shows a main menu
which may for example look like the figure on page 3.
INCOMING CALL
On an incoming individual call, press the T/R button and answer the call. The
station’s microphone and loudspeaker are located next to each other,
immediately below the numeric keys. Hold the station 10 to 15 cm from your
mouth when speaking.
At an incoming group call, you will hear the voice of the calling party in the
loudspeaker immediately. Normally, you do not have to answer the call.
OUTGOING CALL
To effect an outgoing call, enter the call number and press the function button
immediately below the symbol ”Arrow up”. If you want to retrieve the call
number from, for example, the list of abbreviated numbers or the WHC queue,
press the function key under the respective symbol; the display then changes
to a submenu with further instructions.
1996-06-06