1. DL manuals
  2. Connect Tech
  3. Power Supply
  4. PSG013
  5. User Manual

Connect Tech PSG013 User Manual

Manual is about: Xtreme/PSU-UC

Summary of PSG013

  • Page 1

    Connect tech inc. Tel: 519-836-1291 42 arrow road toll: 800-426-8979 (north america only) guelph, ontario fax: 519-836-4878 n1k 1s6 email: sales@connecttech.Com www.Connecttech.Com support@connecttech.Com ctim-00428 revision 0.00 – sept. 16, 2014 xtreme/psu-uc users guide.

  • Page 2: Copyright Notice

    Connect tech xtreme/psu-uc user manual revision 0.00 2 copyright notice the information contained in this document is subject to change without notice. Connect tech inc. Shall not be liable for errors contained herein or for incidental consequential damages in connection with the furnishing, perform...

  • Page 3: Table Of Contents

    Connect tech xtreme xtreme/psu-uc user manual revision 0.00 3 table of contents xtreme/psu-uc ............................................................................................................................................................... 1 copyright notice...............................

  • Page 4: Customer Support Overview

    Connect tech xtreme/psu-uc user manual revision 0.00 4 customer support overview if you experience difficulties after reading the manual and/or using the product, contact the connect tech inc. Reseller from which you purchased the product. In most cases the reseller can help you with product install...

  • Page 5: Contact Information

    Connect tech xtreme xtreme/psu-uc user manual revision 0.00 5 contact information we offer three ways for you to contact us: mail/courier you may contact us by letter at: connect tech inc. Technical support 42 arrow road, guelph, on canada n1k 1s6 email/internet you may contact us through the intern...

  • Page 6: Introduction

    Connect tech xtreme/psu-uc user manual revision 0.00 6 introduction connect tech’s xtreme/psu-uc is a high efficiency, high powered pc/104 form factor power supply with extended temperature capabilities. Xtreme/psu-uc is a highly reliable power supply which provides 154w of total output power with +...

  • Page 7

    Connect tech xtreme xtreme/psu-uc user manual revision 0.00 7 detailed technical specifications specification details dimensions 3.550” x 3.775” (90mm x 96) pc/104 compliant fully meets the pc/104 component height requirements download 3d model files (click here) - .Step model files input voltage ra...

  • Page 8: Board Diagram

    Connect tech xtreme/psu-uc user manual revision 0.00 8 board diagram functional block diagram.

  • Page 9: Part Number Information

    Connect tech xtreme xtreme/psu-uc user manual revision 0.00 9 part number information part number features board image psg013 - +5v @ 10a, +12v @ 5a, +5vsb @ 1a other available ordering options: 5v or 12v output only build option available aluminum caps removed/replaced for vacuum application to ord...

  • Page 10: Hardware Installation

    Connect tech xtreme/psu-uc user manual revision 0.00 10 hardware installation the xtreme/psu-uc can be installed into a pc/104 stack to provide power to the stack through its external power connector. The xtreme/psu-uc can also be used as a stand-alone embedded power supply to provide power to any o...

  • Page 11: Input Power

    Connect tech xtreme xtreme/psu-uc user manual revision 0.00 11 input power the xtreme/psu-uc is meant to use any dc input power source in the range of +9v to +36v dc, which is ideal for many vehicle or mobile application, but also many industrial power solutions as well. Input power circuit diagram ...

  • Page 12: Output Power

    Connect tech xtreme/psu-uc user manual revision 0.00 12 output power technical specifications the xtreme/psu-uc outputs 3 main voltage rails: +5v @ up to 10a +12v @ up to 5a +5v-sb @ up to 1a all outputs provide: current limiting protection overvoltage protection remote on/off control via shutdown# ...

  • Page 13: Configuration Jumpers

    Connect tech xtreme xtreme/psu-uc user manual revision 0.00 13 configuration jumpers j1: charge voltage control jumper description installed uninstalled j1 capacitor voltage charge voltage and ext. Connector voltage set to +24v charge voltage and ext. Connector voltage set to +16v *** warning: do no...

  • Page 14: External Module Charging

    Connect tech xtreme/psu-uc user manual revision 0.00 14 external module charging the xtreme/psu-uc includes an external connector that can be used to charge additional ultracap modules. In order to conform with many +16v rated modules, the removal of jumper j1 will set this external charge voltage t...

  • Page 15

    Connect tech xtreme xtreme/psu-uc user manual revision 0.00 15 turn supply off connecting the shutdown# pin to ground the xtreme/psu-uc’ +5v and +12v will turn off. Alternatively the xtreme/psu-uc can be turned off by driving the shutdown# pin to a voltage below +1.3v. Connection example a - mechani...

  • Page 16: Software Interface

    Connect tech xtreme/psu-uc user manual revision 0.00 16 software interface the xtreme/psu-uc includes multiple interfaces for monitoring and control of the power outputs and board temperature. Rs-232 the xtreme/psu-uc includes an on-board rs-232 port for monitoring and control of the power outputs. ...

  • Page 17: Power Sequencing Details

    Connect tech xtreme xtreme/psu-uc user manual revision 0.00 17 power sequencing details below are some oscilloscope captures of the xtreme/psu-uc’ power sequencing during initial power up. The default sequencing is of the following order: +5v-sb → +5v → +12v. If your system requires a different sequ...

  • Page 18

    Connect tech xtreme/psu-uc user manual revision 0.00 18 detailed specifications and derating graphs *all temperature deratings based on test results in a 125cfm test chamber. Input voltage input voltage.