1. DL manuals
  2. Connect Tech
  3. Adapter
  4. Xtreme/104 Opto
  5. User Manual

Connect Tech Xtreme/104 Opto User Manual

Other manuals for Xtreme/104 Opto: User Manual
Manual is about: Serial Communications Adapter

Summary of Xtreme/104 Opto

  • Page 1

    Xtreme/104 opto user's manual, ver. 0.00 connect tech inc. “meeting your objectives ... By design” xtreme/104 opto multi-port serial communications adapter user manual connect tech inc 42 arrow road guelph, ontario n1k 1s6 tel: 519-836-1291 800-426-8979 fax: 519-836-4878 email: sales@connecttech.Com...

  • Page 2

    Xtreme/104 opto user's manual, ver. 0.00

  • Page 3

    Waranty/copyright/trademarks i xtreme/104 opto user's manual, ver. 0.00 limited warranty connect tech inc. Warrants to the original purchaser of this connect tech hardware product that it is to be in good working order for a period of one year from the date of purchase from connect tech inc. Or an a...

  • Page 4

    Ii certification xtreme/104 opto user's manual, ver. 0.00 certification xtreme/104 opto the xtreme/104 opto product family is to be included into a device ultimately subject to fcc, doc/ic, and ce certification. The customer is responsible for bringing the completed device into compliance prior to r...

  • Page 5

    Contents iii xtreme/104 opto user's manual, ver. 0.00 table of contents product overview .......................................................................... 1 xtreme/104 opto adapter ..................................................... 1 optical isolation .......................................

  • Page 6

    Iv contents xtreme/104 opto user's manual, ver. 0.00 list of tables table 1: port address settings ........................................................ 5 table 2: baud rates ........................................................................ 9 table 3: p4/p5/p6/p7 - 10 pin port header pinou...

  • Page 7

    Product overview 1 xtreme/104 opto user's manual, ver. 0.00 product overview the xtreme/104 opto adapters are high performance multi-port serial adapters in a pc/104 form factor that allow you to connect up to 8 serial devices. Your xtreme/104 opto product consists of the following components: xtrem...

  • Page 8

    2 product overview xtreme/104 opto user's manual, ver. 0.00 optical isolation the xtreme/104 opto uses optocouplers and isolated dc to dc converters to achieve optical isolation. The board will provide 1k vac peak to peak isolation between each port and between each port and your system. However the...

  • Page 9

    Product overview 3 xtreme/104 opto user's manual, ver. 0.00 figure 1 shows the locations of various hardware components of the xtreme/104 opto adapter. Figure 1: xtreme/104 opto adapter p5 irq jumper block jb1 pc/104 bus connector irq jumper block jb2 i/o address/ irq mode/ clock select/ jumper bloc...

  • Page 10

    Xtreme/104 opto user's manual, ver. 0.00

  • Page 11

    Hardware installation 5 xtreme/104 opto user's manual, ver. 0.00 hardware installation port addresses port addresses are configured with the jumper block jb3 on the xtreme/104 opto adapter. Jumpers a, b, and c select a set of port addresses for the ports status port addresses some operating system d...

  • Page 12

    6 hardware installation xtreme/104 opto user's manual, ver. 0.00 example 1 example 2 the following example shows the port address jumper block set for port addreses 2a0, 2a8, 2b0, 2b8 (hex) and status port disabled the following example shows the port address jumper block set for port addreses 100, ...

  • Page 13

    Hardware installation 7 xtreme/104 opto user's manual, ver. 0.00 mode 3 (two irqs): 1. First you jumper position e on the jb3 jumper block 2. The first two ports (ports 1, 2) interrupt on one irq by setting jumpers on the a or c rows and the middle rows of jumper blocks jb1 and jb2. 3. The last two ...

  • Page 14

    8 hardware installation xtreme/104 opto user's manual, ver. 0.00 example: mode 3 – two irqs the following example shows the settings on jb3 and the irq jumper blocks jb1 and jb2 so that ports 1, 2 interrupt on irq 7 and ports 3, 4 interrupt on irq 10. Jb3 irq select a b 9 7 4 3 6 5 irq jumper block ...

  • Page 15

    Hardware installation 9 xtreme/104 opto user's manual, ver. 0.00 baud rate selection the xtreme/104 opto is capable of baud rates up to 460.8 kbps (4x oscillator) or 115.2 kbps (1x oscillator) depending on whether a shorting block is installed across position g on the jb3 jumper block. Please refer ...

  • Page 16

    Xtreme/104 opto user's manual, ver. 0.00

  • Page 17

    Software installation 11 xtreme/104 opto user's manual, ver. 0.00 software installation windows nt windows nt and its standard serial driver allow users to configure their computer systems with multiple serial ports sharing one irq. Please refer to the winnt.Txt file on the xtreme/104 opto distribut...

  • Page 18

    Xtreme/104 opto user's manual, ver. 0.00

  • Page 19

    Specifications 13 xtreme/104 opto user's manual, ver. 0.00 specifications operating environment storage temperature: -65 ° c to 150° c operating temperature: 0 ° c to 70° c (standard version) -40 ° c to 85° c (industrial version) humidity: 0 to 90% relative humidity, non-condensing power requirement...

  • Page 20

    14 specifications xtreme/104 opto user's manual, ver. 0.00 dimensions xtreme/104 opto pcb length: 10.40 cm (4.09 inches) – includes connectors height: 1.10 cm (0.43 inches) width: 9.60 cm (3.78 inches) compliant to pc/104 specification 2.3 connectors/interface xtreme-2/104 opto two 10 pin header con...

  • Page 21

    Connectors/pinouts 15 xtreme/104 opto user's manual, ver. 0.00 connectors/pinouts table 3: p4/p5/p6/p7 - 10 pin port header pinouts pin no. Rs-232 direction rs-485/422 direction 1 nc nc rxd (+) input 2 nc nc cts (-) input 3 rxd input rxd (-) input 4 rts output rts (+) output 5 txd output txd (+) out...

  • Page 22

    16 connectors/pinouts xtreme/104 opto user's manual, ver. 0.00 table 4: db-9 cable connector pinouts pin no. Rs-232 signal direction rs-485/422 signal direction 1 nc nc rxd (+) input 2 rxd input rxd (-) input 3 txd output txd (+) output 4 nc nc txd (-) output 5 isolated gnd signal gnd isolated gnd s...

  • Page 23

    Factory default settings 17 xtreme/104 opto user's manual, ver. 0.00 factory default settings function factory setting i/o port address jb3 is set for i/o port addresses 300, 308, 310, 318 hex and the status port disabled (positions a, b, c, not jumpered) status port address jb3 is set for the statu...

  • Page 24

    Xtreme/104 opto user's manual, ver. 0.00

  • Page 25

    Rs-232/rs-485/422 option 19 xtreme/104 user's manual, ver. 0.01 rs-232/rs-485/422 interfaces electrical interace selection the xtreme/104 opto adapter provides jumper selectable rs-232 and rs-485/422 electrical interfaces on each port. Jumper blocks jb4, jb5, jb6 and jb7 set the electrical interface...

  • Page 26

    20 rs-232/rs-485/422 option xtreme/104 opto user's manual, ver. 0.00 full duplex mode by making sure that there are no jumpers on positions a and c of jumper blocks jb4, jb5, jb6 and jb7 you can run the individual rs-485/422 ports in full duplex mode. In this mode, txd & rxd are active all the time....

  • Page 27

    Rs-232/rs-485/422 option 21 xtreme/104 user's manual, ver. 0.01 half duplex rs-485 by jumpering positions a and c of jumper blocks jb4, jb5, jb6 and jb7 you can run the individual rs-485/422 ports in half duplex mode. In this mode your xtreme/104 opto adapter controls the transmitter and receiver ci...

  • Page 28

    22 rs-232/rs-485/422 option xtreme/104 opto user's manual, ver. 0.00 multi-drop slave mode by jumpering positions a and c of jumper blocks jb4, jb5, jb6, jb7 and by jumpering j1(ports 1 & 2) or j2(ports3 & 4) you can run the individual rs-485/422 ports in multi-drop slave mode.In this mode the txd l...

  • Page 29

    Rs-232/rs-485/422 option 23 xtreme/104 user's manual, ver. 0.01 line termination jumper blocks jb4, jb5, jb6 and jb7 can terminate the transmitters and receivers on the individual rs-485/422 ports through jumper selectable 120 Ω fixed resistors. Please refer to figure 1 for the locations of jb4, jb5...

  • Page 30

    24 rs-232/rs-485/422 option xtreme/104 opto user's manual, ver. 0.00 rs-485/422 cable wiring figure 2 describes a 4 wire cabling scheme between a port on the xtreme/104 opto adapter to a port on the rs-485/422 peripheral. Figure 2: rs-485/422 wiring diagram (4 wire) rts + rts - cts + cts - txd + txd...

  • Page 31

    Notes 25 xtreme/104 user's manual, ver. 0.01.

  • Page 32

    Xtreme/104 opto user's manual, ver. 0.00