Connect2Car MFC (V Series) Installation Manual - page 4
MFC INSTALLATION MANUAL
Page 3 of 22
CONNECT
2
CAR.COM
1.
INTRODUCTION
This document describes the installation outline and detail for the Connect2Car MFC also
known as the Multi Function Controller Module is designed to provide multi-purpose
solutions for real-time control and management of vehicle accessories. The Multi
Functional Controller is a new type of flexible dynamic controller system geared
specifically towards car accessory management. The heart of the MFC unit lies in the
flexible user configurable software management and control system. Using a cell phone,
PDA or CarPC Computer system, the user or installer can specifically control any accessory
in any manner they wish, or use known preconfigured packages. Using the selected
configuration packages, the controller device (phone, PDA e.g.) establishes a two-way
communication with the hardware unit in the vehicle, and provides the user with virtual
dashboard of their controls of interest, based on their configurations. Furthermore, the
rich user interface skins also provide a more customized experience and local
personalization to taste.
1.1 Disclaimer
The information contained in this document is accurate at time of release. However,
as Connect2Car Inc, is committed to continued research and development activities,
these specifications may change from time to time.
The present manual by Connect2Car Inc reflects the present state of the art of the
products described therein. We have endeavored to give a description that is as
complete and clear as possible in order to make work with our products as easy as
possible for you. All the same, the manual may contain technical inaccuracies and
typing errors. As a result of the rapid advance in the art, we must also reserve the
right to incorporate technical alterations and developments without separate advance
notice.
That is why Connect2Car Inc, does not give any warranty for the contents of the
manual and for its continuing applicability. Nor is Connect2Car Inc. liable for any loss
that might result from consultation of this manual. Particularly, Connect2Car Inc is
not liable for damage, nor indirect damage (including damage caused by financial
loss, and similar consequences), arising from the use or improper use of this manual,
not even in the case where it was pointed out to Connect2Car Inc. or an agent of
Connect2Car Inc. that such damage might be sustained.
Contact your Connect2Car representative, should you require clarification on
information contained in this document or to request of copy of the latest version of
this document. You can also visit www.connect2car.com for all the latest
information/product manuals and documentation.
1.2 Copyright
The Connect2Car MFC Installation Manual is copyright by Connect2Car Inc. with all
rights reserved. No part of this manual may be reproduced in any form without the
prior written approval of Connect2Car Inc.
1.3 Safety Issues
It is recommended that you read these simple guidelines carefully before use, to
ensure the safe operation of the module. The MFC should be installed by a
professional automotive electronics installer.
The fact that there is unlimited control through the SOFTDASH interface software
could give rise to one putting the accessories in and unconditional or dangerous state.