Connexx SB-26 Installation And Operation Manual - page 15
4. Touch the (mode) button on unit repeatedly until "AUX" appears on display.
1. Connect one end of audio connection cable (not supplied) to the AUX IN jack on the front
2. Connect the other end to the Audio out/Line out/Phone jack on the external player ( such
as iPod, iPhone, iPad, MP3 player, Discman... etc. )
5. Play the music in the external player as usual and set the desired volume.
AUX IN : LISTEN TO EXTERNAL AUDIO DEVICES
of the unit as pictured above.
USB : LISTEN TO EXTERNAL AUDIO DEVICES
4. Play the music in the external player as usual and set the desired volume.
1. Insert the USB as the figure on right.
~ Press button on the Remote Control to play or pause.
~ Press or button on the Remote Control to skip to next or previous track.
NOTE:
The USB port can also be used for charging.
Or press AUX IN button on Remote Control.
3. Power ON the unit.
Or press USB button on Remote Control.
2. Power ON the unit.
NOTE:
NOTE:
NOTE:
USB
3. Touch the (mode) button on unit repeatedly until
"USB" appears on display.
To the Phones/Aux Out/Line Out
Connect to the 3.5mm Audio Out jack
of external audio devices including Tablets,
Laptops, Smartphones, MP3 Players, etc.
13