D&b Audiotechnik Z5576.050 User Manual - page 6
2.1. Handling
The touring rack is equipped with two sliding doors allowing quick
and easy access to the front and rear panels of the devices.
1. Unlock the both door lock mechanisms.
2. Open the door and ...
3. push the door into its park position.
2.2. Cooling and placement
When using the d&b Z5576.050 Touring rack assembly, make
sure to provide sufficient space of 0.5 m (1.6 ft) at the front and
rear of the touring rack to ensure adequate cooling airflow.
Make sure both the front and rear doors are opened and
pushed into their park position to provide sufficient cooling.
Do
not stack Z5576.050 Touring rack assemblies. The rack
assemblies can be positioned side by side.
They can also be combined with Z5330 D80, or Z5560 D20
Touring rack assemblies, either side by side or with a maximum of
one of these Touring racks positioned on top, as shown in the
graphic below (Shown with: Z5330 D80 Touring rack assembly.
The same applies to Z5560 D20 Touring rack assembly.)
2. Handling, cooling and placement
d&b Z5576.050 Manual 1.1 en
6