Dwl-650 wireless cardbus adapter cd-rom (containing manual and warranty) before you begin check your package contents these are the items included with your dwl-650 purchase: if any of the above items are missing, please contact your reseller. ©2002 d-link systems, inc. All rights reserved. Trademar...
Insert the d-link cd (continued) the install screen will appear. If the cd does not automatically start, go to start > run and type “d:\setup.Exe.” if it does start, proceed to the next screen. The letter “d” represents the letter of the cd-rom drive. Your cd-rom drive may be a different drive lette...
Click no, i will restart my computer later click finish shut down your laptop insert the dwl-650 into the cardbus slot in your laptop a. Make sure your laptop computer is turned off. B. Locate thecardbusslot onyour laptop computer. C. Gently insert the dwl-650 into the cardbus slot in your laptop co...
Continued... 32-bit connector this is the connector that fits into the cardbus slot of your laptop. Power led lights to indicate that the dwl-650 is properly inserted. Restart your laptop computer when you restart your computer this found new hardware wizard (windows xp) screen will appear: select i...
Restart your laptop computer (cont.) for windows xp: this hardware installation alert screen may appear after the desktop computer restarts. Click continue anyway to finalize the installation (the d-link driver software for this device is undergoing windows logo testing. Microsoft certification is p...
If the utility icon does not appear, double- click the shortcut icon that has appeared on your desktop. Using the configuration utility a. Status: displays the mac address of the access point that is associated with the dwl-650. B. Ssid : the service set identifier is the name assigned to the wirele...
Make changes to the dwl-650’s factory settings by clicking on the configuration menu. G. Ssid: the service set identifier is the name assigned to the wireless network. The factory ssid setting is set to default. Make changes here to match the ssid on existing wireless router or access point. H. Wire...
Ip address configuration to connect to a network, make sure the proper network settings are configured for dwl-650. For microsoft windows xp: go to start > right click on my network places > select properties > double-click on the network connection associated with the dwl-650. Click internet protoc...
For windows 2000 users: go to start > settings > network and dial- up connections > double-clickon the local area connection associated with the dwl- 650 > select properties click internet protocol (tcp/ip) click properties select obtain an ip address automatically (if the wireless router or access ...
For windows me and 98 users: click internet protocol (tcp/ip) go to start > settings > control panel > double- clickon the local area connection associated with the dwl-650 > select properties click internet protocol (tcp/ip) click properties select obtain an ip address automatically (if the wireles...
Checking the wireless connection for windows xp and 2000 go to start > run > type cmd . A window similar to this will appear. Type ping xxx.Xxx.Xxx.Xxx , where xxx is the ip address of the wireless router or access point. A good wireless connection will show the reply from the wireless router or acc...
Once properly installed the dwl-650 wireless cardbus adapter will be able to connect to other 802.11b wireless adapters, routers and access points. The dwl- 650 using its default wireless settings also connects to other d-link air ™ wire- less adapters, access points and routers (with the default se...
