9
Appendix (Continued)
Using the Configuration Utility
A.
Status:
Displays the
MAC Address of the
Access Point that is
associated with the
DWL-AG520.
B.
SSID
:
The Service Set
Identifier is the name
assigned to the wireless
network. The factory
SSID setting is set to
default.
F.
TxRate:
The default
setting is Auto; meaning,
TxRate settings are
automatically determined
by the DWL-AG520
depending on the
distance from the access
point.
H.
Signal Strength:
Displays the Link Quality for the
DWL-AG520 wireless connection to the access point.
The Signal Strength represents the wireless signal
between the access point and the DWL-AG520. The
percentage coincides with the graphical bar.
G.
Channel:
Displays the channel
information. By default, the channel is
set to 6. Please note that the DWL-
AG520 will automatically adjust channel
depending on the Access Point.
E
C
D
F
B
A
G
H
I
C.
Frequency
:
Displays the
current fre-
quency used
by the adapter.
D.
Wireless Mode:
The factory setting is set to Infrastructure. Ad-Hoc mode is used for
peer-to-peer networking.
E.
Encryption:
Displays the current encryption status of the wireless connection.
I.
Packet
Count:
Graphi-
cally displays
the statistics of
data transmitted
and received.