D-Link AirPlus DI-614+ Quick Installation Manual - Restart Your Computer
3
Restart Your Computer
Connecting Additional Computers
To The DI-614+
WAN LED
– a solid light
indicates connection on the
WAN port. This LED blinks
during data transmission.
LOCAL NETWORK LEDs
– a
solid light on the port indicates
a connection to an Ethernet
enabled computer on ports 1-4.
This LED blinks during data
transmission.
POWER LED
– a solid
light indicates a proper
connection to the power
supply.
WLAN LED
– a solid light
indicates that the wireless
segment is ready. This LED
blinks during wireless data
transmission.
M1 LED
–
a solid light
indicates that the DI-614+
is ready.
M2 LED
– A solid light
indicates that the unit is
defective.
When you have completed the steps in this
Quick Installation Guide,
your connected
network should look similar to this:
Using additional Ethernet (CAT5 UTP) cables, connect your Ethernet-equipped
computers to the remaining Ethernet LAN ports on the back panel of the DI-614+