D-Link AirPlus DWL-900AP+ Quick Installation Manual

Other manuals for AirPlus DWL-900AP+: Reference Manual, Quick Install Manual, User Manual, User Manual, Manual, Quick Installation Manual

Manual is about: 2.4 GHz Wireless Access Point

Page of 8

Download

Print this page

Bookmark us

Before You Begin

It’s best to use a computer (with an Ethernet adapter) that is connected to a router for

configuring the DWL-900AP+. The default IP address for the DWL-900AP+ is

192.168.0.50

with a Subnet Mask of

255.255.255.0

. You will need to assign your

computer a Static IP address within the same range as the DWL-900AP+’s IP address

for the purpose of configuration of the DWL-900AP+.

See the Manual on the CD-ROM

if you need assistance in assigning a Static IP address for your network adapter.

Check Your Package Contents

These are the items included with your DWL-900AP+ purchase:

If any of the above items are missing, please contact your reseller.

property of their respective holders. Software and specifications subject to change without

notice. DWL-900AP+.05292002

This product can be set up using any

current web browser, i.e., Internet

Explorer 5x, Netscape Navigator 4x.

DWL-900AP+

D-Link AirPlus™

Wireless Access Point

• DWL-900AP+ Wireless Access Point

• CD-ROM (containing Manual and Warranty)

• Ethernet (CAT5 UTP/Straight Through) Cable

• 5V DC, 2A Power Adapter

Using a power

supply with a

different voltage rating

will damage and void

the warranty for this

product.

1 2 3 4 5 6 7 Next › »

Summary of AirPlus DWL-900AP+

Page 1
Before you begin it’s best to use a computer (with an ethernet adapter) that is connected to a router for configuring the dwl-900ap+. The default ip address for the dwl-900ap+ is 192.168.0.50 with a subnet mask of 255.255.255.0 . You will need to assign your computer a static ip address within the s...
Page 2: Access Point to Your Network
When connecting the dwl-900ap+ wireless access point to an ethernet adapter in a computer, use a cross- over ethernet cable. Connecting the dwl-900ap+ wireless access point to your network a. First, connect the power adapter to the receptor at the back panel of the dwl-900ap+ and then plug the other...
Page 3: Using The Setup Wizard
When you have completed the steps in this quick installation guide, your connected network should look similar to this: using the setup wizard open your web browser and type “http://192.168.0.50” into the url address box. Then press the enter or return key. Type “admin” for the username and leave th...
Page 4
Using the setup wizard (continued) click run wizard click next you will see the following screens. Once you have logged in, the home screen will appear..
Page 5
Click next click next click next step 1 - set up your new password . You have the option to establish a password. Step 2 - wireless setup the default wireless settings are: ssid = default channel = 6 you can change these settings to match an existing wireless network. Step 3 - encryption the dwl-900...
Page 6: Your Setup Is Complete!
Your setup is complete! You will be returned to the home tab. Click restart click close.
Page 7
For additional settings or information, refer to the advanced, tools, or status tabs on the web-management interface; or to the manual located on the cd-rom. Click exit.
Page 8: Technical Support
Technical support you can find the most recent software and user documentation on the d-link website. D-link provides free technical support for customers within the united states for the duration of the warranty period on this product. U.S. Customers can contact d-link technical support through our...