Before you begin it’s best to use a computer (with an ethernet adapter) that is connected to a router for configuring the dwl-900ap+. The default ip address for the dwl-900ap+ is 192.168.0.50 with a subnet mask of 255.255.255.0 . You will need to assign your computer a static ip address within the s...
When connecting the dwl-900ap+ wireless access point to an ethernet adapter in a computer, use a cross- over ethernet cable. Connecting the dwl-900ap+ wireless access point to your network a. First, connect the power adapter to the receptor at the back panel of the dwl-900ap+ and then plug the other...
When you have completed the steps in this quick installation guide, your connected network should look similar to this: using the setup wizard open your web browser and type “http://192.168.0.50” into the url address box. Then press the enter or return key. Type “admin” for the username and leave th...
Using the setup wizard (continued) click run wizard click next you will see the following screens. Once you have logged in, the home screen will appear..
Click next click next click next step 1 - set up your new password . You have the option to establish a password. Step 2 - wireless setup the default wireless settings are: ssid = default channel = 6 you can change these settings to match an existing wireless network. Step 3 - encryption the dwl-900...
Your setup is complete! You will be returned to the home tab. Click restart click close.
For additional settings or information, refer to the advanced, tools, or status tabs on the web-management interface; or to the manual located on the cd-rom. Click exit.
Technical support you can find the most recent software and user documentation on the d-link website. D-link provides free technical support for customers within the united states for the duration of the warranty period on this product. U.S. Customers can contact d-link technical support through our...