1 this product can be set up using any current web browser, i.E., internet explorer 6 or netscape navigator 6.2.3. Dwl-2000ap d-link airplus xtreme g tm wireless access point 5v 2.0a dc power adapter ©2003 d-link systems, inc. All rights reserved. Trademarks or registered trademarks are the property...
2 a. Receptor for power adapter . Reset button pressing this button restores the access point to its original factory default settings. B. Lan port 1 for connecting the access point to a switch on the local network with an ethernet cable a. First, connect the power adapter to the receptor at the bac...
3 using the setup wizard open your web browser and type “http://192.168.0.50” into the url address box. Then press the enter or return key. The logon pop-up screen will appear. Type “admin” for the username and leave the password field blank. Click ok when you have completed the steps in this quick ...
4 once you have logged in, the home screen will appear. You will see the following screens. Click run wizard click next using the setup wizard (continued).
5 click next step 1 - set up your new password . You have the option to establish a password. Step 2 - wireless setup the default wireless settings are: ssid = default channel = 6 you can change these settings to match an existing wireless network. Click next using the setup wizard (continued).
6 step 3 - encryption the dwl-2000ap is capable of two levels of wireless encryption 64-bit and 128-bit. By default the encryption is disabled. You can change the encryption settings for more secure wireless communication. Your setup is complete! Using the setup wizard (continued) click next click r...
7 click close you will be returned to the home tab. Click to exit for additional settings or information, refer to the advanced, tools, or status tabson the web-management interface; or to the manual located on the cd-rom..
8 appendix to assign a static ip address to the laptop or computer that you are using to configure the dwl-2000ap, please do the following: assigning a static ip address in windows go to start > double- click on control panel > double-click on network connections > right-click on local area connecti...
9 for windows 2000 users: go to start > settings > network and dial-up connections > double-clickon the local area connection associated with the network adapter installed on your system> select properties click properties click internet protocol (tcp/ip) select use the following ip address input yo...
10 click internet protocol (tcp/ip) go to start > settings > control panel > double-clickon the local area connection associated with the network adapter installed on your system > select properties for windows me and 98se users: click properties click internet protocol (tcp/ip) select specify ip ad...
11 for apple macintosh os x: go to the apple menu click on network and select system preferences select built in ethernet in the show pull-down menu click on apply now select manually in the configuration pull-down menu input your ip address and subnet mask. (the ip address must be within the same r...
12 technical support you can find software updates and user documentation on the d-link website. D-link provides free technical support for customers within the united states and within canada for the duration of the warranty period on this product. U.S. And canadian customers can contact d-link tec...