D-Link DCS-3112 Quick Install Manual - Lis
Manual is about: HD Day & Night Network Camera
of
12
D-Link DCS-3112 Quick Install Guide
5
EN
G
LIS
H
3. Hardware Installation
Basic Connection (without PoE)
Connect the camera to your switch or router via Ethernet cable.
Connect the supplied power cable from the camera to a power outlet.
Connection Using a PoE Switch
If you are using a PoE switch or router, connect the network camera via Ethernet cable. PoE will
transmit both power and data over a single cable.
Note: Once power has been established, the LED will turn red. When the device has obtained
an IP address and is accessible, the LED will turn green.