2 d-link dcs-3411/3430 user manual table of contents product overview ..............................................................3 package contents ......................................................................... 3 system requirements ........................................................
3 d-link dcs-3411/3430 user manual section 1 - product overview • d-link dcs-3411/3430 day & night network camera • cat5 ethernet cable • power adapter • manual and software on cd • quick install guide • camera stand • two antennas (dcs-3430 only) note: using a power supply with a different voltage ...
4 d-link dcs-3411/3430 user manual section 1 - product overview introduction the d-link dcs-3411/3430 day & night network camera is a powerful surveillance system that can connect to your network. The dcs-3411/3430 differs from a conventional pc camera because it is a stand-alone system with a built...
5 d-link dcs-3411/3430 user manual section 1 - product overview • multiple stream types: choose between h.264 / mpeg4 / mjpeg depending on the type of application the camera is being used for. When using h.264 you can reduce the bandwidth and storage needs by up to 80% when compared to mjpeg or by u...
6 d-link dcs-3411/3430 user manual section 1 - product overview hardware overview 1 power receptor connects to the supplied power adapter. 2 di/do wiring i/o connectors for external devices. 3 power led the power led is on the back of the camera. As soon as the power adapter is connected to the came...
7 d-link dcs-3411/3430 user manual section 1 - product overview hardware installation connect the ethernet cable connect an ethernet cable to the network cable connector located on the network camera’s back panel and attach it to the network. Attach the external power supply attach the external powe...
8 d-link dcs-3411/3430 user manual section 1 - product overview the network camera comes with a camera stand with a swivel ball screw head that can be attached to the network camera bottom socket cavity. Attach the camera stand to the network camera and station it for your application. There are hol...
9 d-link dcs-3411/3430 user manual section 2 - installation turn on the computer and insert the d-link dcs-3411/3430 driver cd in the cd-rom drive. The step-by-step instructions that follow are shown in windows® xp. The steps and screens are similar for the other windows operating systems. If the cd...
10 d-link dcs-3411/3430 user manual section 2 - installation click next to continue. Click yes to accept the license agreement..
11 d-link dcs-3411/3430 user manual section 2 - installation to start the installation click next. Note: the installation may take several minutes to complete..
12 d-link dcs-3411/3430 user manual section 2 - installation click finish to complete the installation..
13 d-link dcs-3411/3430 user manual section 2 - installation click ffdshow now, click on ffdshow from the autorun screen. This will install the proper codecs that will allow you to playback video taken by the dcs-3411/3430. Click i agree to continue..
14 d-link dcs-3411/3430 user manual section 2 - installation select your language and click ok. Click next to continue..
15 d-link dcs-3411/3430 user manual section 2 - installation select the location you want to install to and click next to continue. Click next to continue..
16 d-link dcs-3411/3430 user manual section 2 - installation click next to continue. Click next to continue..
17 d-link dcs-3411/3430 user manual section 2 - installation click next to continue. Click next to continue..
18 d-link dcs-3411/3430 user manual section 2 - installation click next to continue. Click next to continue..
19 d-link dcs-3411/3430 user manual section 2 - installation once ffdshow is finished installing, click finish..
20 d-link dcs-3411/3430 user manual section 3 - configuration configuration this section will show you how to configure your new d-link network camera using the setup wizard. Setup wizard configuration click on the d-link setup wizard se icon that was created in your windows start menu..
21 d-link dcs-3411/3430 user manual section 3 - configuration enter the admin id and password. Note: the default admin id is admin with the password left blank. The setup wizard will appear and show the mac address of the dcs-3411/3430 and an ip address (which may or may not be correct depending on ...
22 d-link dcs-3411/3430 user manual section 3 - configuration select static ip to use the same ip address at each boot up. Click next to continue. Select dhcp if you want to obtain a new ip address every time the camera boots up. Click next to continue..
23 d-link dcs-3411/3430 user manual section 3 - configuration click the button labeled link to access the web configuration page. The setup wizard will automatically open your web browser to the ip address of the dcs-3411/3430, in this example it is: http://192.198.0.185. Your dcs-3411/3430 may have...
24 d-link dcs-3411/3430 user manual section 3 - configuration web-based configuration utility to access the configuration utility, open a web-browser such as internet explorer and enter the ip address for your network camera (http://192.168.1.179) note: for example, the address is 192.168.1.179. You...
25 d-link dcs-3411/3430 user manual section 3 - configuration live video camera this section shows your camera’s live video. You may select the available thumbnails for your option of predefined video profile, full screen mode, and action items of taking snapshot, recording, set storage folder, list...
26 d-link dcs-3411/3430 user manual section 3 - configuration setup wizard to quickly configure your network camera, click internet connection setup wizard, or click manual internet connection setup to manually configure your network camera. To quickly configure your network camera’s motion detectio...
27 d-link dcs-3411/3430 user manual section 3 - configuration select dhcp if you are unsure which settings to pick. Click next to continue and skip to page 28. Select static ip if your internet service provider has provided you with connection settings, or you wish to set a static address within you...
28 d-link dcs-3411/3430 user manual section 3 - configuration if you are using pppoe, select enable and enter your user name and password, otherwise select disable and click next to continue. If you have a dynamic dns account and would like the camera to update your ip address automatically, select ...
29 d-link dcs-3411/3430 user manual section 3 - configuration configure the correct time to ensure that all events will be triggered, captured and scheduled at the right time. Click next to continue. If you have selected dhcp, you will see a summary of your camera’s settings. Please note down all th...
30 d-link dcs-3411/3430 user manual section 3 - configuration motion detection setup wizard this wizard will guide you through a step-by-step process to configure your new d-link camera motion detection functions. Click next to continue. This section will allow you to enable or disable motion detect...
31 d-link dcs-3411/3430 user manual section 3 - configuration this step allows you to specify how you will receive the events notification of your camera, either via using email or ftp. You will need to enter all the relevant information for your email account or ftp settings. Then, click next to co...
32 d-link dcs-3411/3430 user manual section 3 - configuration you have completed the motion detection wizard. Click apply to activate your settings..
33 d-link dcs-3411/3430 user manual section 3 - configuration lan settings: dhcp: static ip address: ip address: subnet mask: default gateway: primary dns: secondary dns: enable upnp: settings for your local area network. Select this connection if you have a dhcp server running on your network and w...
34 d-link dcs-3411/3430 user manual section 3 - configuration enable upnp port forwarding: enable pppoe: user name: password: http port: rtsp port: enable this setting to allow the camera to add port forwarding entries into the router automatically. Enable this setting if you network is using pppoe ...
35 d-link dcs-3411/3430 user manual section 3 - configuration wireless setup (dcs-3430 only) this sections allows you to setup and configure the wireless settings for your camera. Enable wireless: site survey: ssid: wireless mode: channel: authentication: encryption: key: signal: select to enable wi...
36 d-link dcs-3411/3430 user manual section 3 - configuration enable ddns: server address: host name: user name: password: timeout: status: click to enable the ddns function. Select your dynamic dns provider from the pull down menu or enter the server address manually. Enter the host name of the ddn...
37 d-link dcs-3411/3430 user manual section 3 - configuration brightness: contrast: flip: b/w: saturation: sharpness: mirror: frequency: an adjustable setting to compensate for backlit scenes. Adjust to control the contrast of colors between the object. This feature will help improve images under a ...
38 d-link dcs-3411/3430 user manual section 3 - configuration resolution: fps: jpeg quality: bps: rtsp url: analog output: this option allows the user to choose the video resolution of the camera between 160x120, 320x240 and 640x480: • qqvga @ 160x112 - usually used for only displays of handheld dev...
39 d-link dcs-3411/3430 user manual section 3 - configuration auto exposure: audio setup: enable speaker: speaker volume: enable microphone: microphone volume: select on to use auto exposure or off to use auto iris. You may switch the external speaker and microphone on/off or adjust the volume. Enab...
40 d-link dcs-3411/3430 user manual section 3 - configuration enable video motion: sensitivity: draw motion area: erase motion area: check this option to turn on the motion detection feature for your camera. Set the measurable difference between two sequential images that would indicate motion. Sele...
41 d-link dcs-3411/3430 user manual section 3 - configuration time zone: enable daylight saving: auto daylight saving: set date and time manually: offset: synchronize with ntp server: ntp server: set the date and time manually: copy your computer’s time settings: select your time zone from the drop-...
42 d-link dcs-3411/3430 user manual section 3 - configuration select this option to enable the recording feature. Selecting this will allow you to record to a sd card inserted into the sd slot on the right side of the unit. When recording to the sd card, you can only use event based recording. To ac...
43 d-link dcs-3411/3430 user manual section 3 - configuration how to save video to a shared folder? 1. Set the folder in your computer to shared. You can set as anonymous authentication or set a user name and password..
44 d-link dcs-3411/3430 user manual section 3 - configuration 2. Click enable recording. 3. Set the samba authentication to anonymous or account. Enter the ip address of the computer or network attached storage with the shared folder and the name of the shared folder in step 1 to record to. If you s...
45 d-link dcs-3411/3430 user manual section 3 - configuration enable or disable snapshot event. Select one or more of the events such as motion detection, d/i signal 1 and d/i signal 2 for the source that triggers the action. Select to continuously record. Select this option to manually schedule and...
46 d-link dcs-3411/3430 user manual section 3 - configuration click this icon to automatically format the sd card and create “picture” & “video” folders. If the picture files are stored on the sd card, click on the picture folder and choose the picture file you would like to view. If video files are...
47 d-link dcs-3411/3430 user manual section 3 - configuration advanced icr automatic: day mode: night mode: scheduled mode: selecting this feature will automatically set to the day mode during daylight and to the night mode during the night or in dark places. Selecting this mode will disable the ir ...
48 d-link dcs-3411/3430 user manual section 3 - configuration rs-485 support pan-tilt: protocol: id: baud rate: data bit: stop bit: parity bit: when enabling support pan-tilt, a control panel will be displayed on the live video page allowing control through rs-485 for an external camera enclosure. S...
49 d-link dcs-3411/3430 user manual section 3 - configuration enable d/o signal: trigger event: this enables the d/o to send a signal when there is a triggered event. You can choose from one or up to three events, such as motion detection, d/i signal 1, and d/i signal 2 for the sources of the trigge...
50 d-link dcs-3411/3430 user manual section 3 - configuration maintenance device admin admin password setting: add user account: user name: password: user list: camera name: enable osd: label: show time: led light: set a new password for the administrator’s account. Add new user account. The user na...
51 d-link dcs-3411/3430 user manual section 3 - configuration save to local hard drive: local from local hard drive: restore to factory default: reboot device: you may save and document your current configuration settings into your computer. Locate a pre-saved configuration by clicking browse and th...
52 d-link dcs-3411/3430 user manual section 3 - configuration current firmware version: current product name: file path: upload: it will be automatically determined and displayed by the system. Name of the existing product. Locate the file (upgraded firmware) on your hard drive by clicking browse. S...
53 d-link dcs-3411/3430 user manual section 3 - configuration status device info this page displays all the details information about your device and network connection..
54 d-link dcs-3411/3430 user manual section 3 - configuration logs this page displays the log information of your camera. You may download the information by clicking download or delete the log information by clicking clear..
55 d-link dcs-3411/3430 user manual section 3 - configuration help.
56 d-link dcs-3411/3430 user manual section 5 - troubleshooting 1. What is an network camera? The network camera is a stand-alone system connecting directly to an ethernet or fast ethernet network. It differs from a conventional pc camera, the network camera is an all-in-one system with built-in cpu...
57 d-link dcs-3411/3430 user manual section 5 - troubleshooting 9. Can the dcs-3411/3430 be installed and work if a firewall exists on the network? If a firewall exists on the network, port 80 is open for ordinary data communication. The dcs-3411/3430 uses port 5002 for streaming audio and port 5003...
58 d-link dcs-3411/3430 user manual section 5 - troubleshooting 13. The images appear to be of poor quality, how can i improve the image quality? Make sure that your computer’s display properties are set above 256 colors. Using 16 or 256 colors on your computer will produce dithering artifacts in th...
59 d-link dcs-3411/3430 user manual section 6 - di/do reed switch vibration sensor rs485 device alarm dc power 12v photo relay photo relay photo relay rs-485 transceivers 0 0 0 0 0 ir illuminator ※ dc12v total output current maximum to 200ma di/do.
60 d-link dcs-3411/3430 user manual section 6 - di/do 12v+/12v- connect to an ir illuminator or other device in parallel connection. The total output current should be under 200ma. Di receive signals from a motion detector or any other external security device. Do connect to an alarm or buzzer. Refe...
61 d-link dcs-3411/3430 user manual appendix a - networking basics networking basics check your ip address by default, the tcp/ip settings should be set to obtain an ip address from a dhcp server (i.E. Wireless router) automatically. To verify your ip address, please follow the steps below. Click on...
62 d-link dcs-3411/3430 user manual appendix a - networking basics statically assign an ip address if you are not using a dhcp capable gateway/router, or you need to assign a static ip address, please follow the steps below: step 1 windows ® 7 - click on start > control panel > network and internet ...
63 d-link dcs-3411/3430 user manual appendix b - technical specifications technical specifications video codec • mpeg4 / mjpeg/ h.264 multi profile compression simultaneously poe (3411 only) • supported ieee 802.3af standard sensor • 1/4” cmos sensor sdram • 64 mbytes flash memory • 8 mbytes lens • ...
64 d-link dcs-3411/3430 user manual appendix b - technical specifications wireless (dcs-3430 only) frequency rangeand channels • 2.412-2.4835 ghz • 13 channels (depend on area) transmition • 2tx, 2rx date range • ieee 802.11n: from mcs0 to mcs15 • ieee 802.11g: 54, 48, 36, 24, 18, 12, 9, 6 mbps • ie...
65 d-link dcs-3411/3430 user manual appendix b - technical specifications low lux • 0.5 lux@f1.8 3a control • agc, awb, aes electronic shutter • ntsc: 1/60 ~ 1/100000 sec. • pal: 1/50 ~ 1/110000 sec. Audio sample rate • gsm-amr: 12.2kbps, adpcm: 8kbps cable • cable length: 1800 ± 30mm • ul 20awgx2c ...
66 d-link dcs-3411/3430 user manual appendix c - contacting technical support contacting technical support u.S. And canadian customers can contact d-link technical support through our web site or by phone. Before you contact technical support, please have the following ready: • model number of the p...
67 d-link dcs-3411/3430 user manual appendix d - warranty warranty subject to the terms and conditions set forth herein, d-link systems, inc. (“d-link”) provides this limited warranty: • only to the person or entity that originally purchased the product from d-link or its authorized reseller or dist...
68 d-link dcs-3411/3430 user manual appendix d - warranty limited software warranty: d-link warrants that the software portion of the product (“software”) will substantially conform to d-link’s then current functional specifications for the software, as set forth in the applicable documentation, fro...
69 d-link dcs-3411/3430 user manual appendix d - warranty • after an rma number is issued, the defective product must be packaged securely in the original or other suitable shipping package to ensure that it will not be damaged in transit, and the rma number must be prominently marked on the outside...
70 d-link dcs-3411/3430 user manual appendix d - warranty limitation of liability: to the maximum extent permitted by law, d-link is not liable under any contract, negligence, strict liability or other legal or equitable theory for any loss of use of the product, inconvenience or damages of any char...
71 d-link dcs-3411/3430 user manual appendix d - warranty fcc statement: this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference in a...
72 d-link dcs-3411/3430 user manual appendix d - warranty for detailed warranty information applicable to products purchased outside the united states, please contact the corresponding local d-link office. Industry canada notice: this device complies with rss-210 of the industry canada rules. Operat...
73 d-link dcs-3411/3430 user manual appendix e - registration version 1.10 august 24, 2010 product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Registration.