D-Link DCS-3511 Quick Install Manual - page 8
D-Link DCS-3511/DCS-3530 Quick Install Guide
8
Click on the
D-Link Setup Wizard SE icon that was
created in your Windows Start menu.
Start > D-Link > Setup Wizard SE
Take a moment to confirm your settings and click
Restart.
Select
DHCP if you want the camera to obtain an IP
address automatically from your router or DHCP server
or select
Static IP to manually assign the camera's IP
settings.
Click
Next to proceed to the next page.
Enter the Admin ID and password. When logging in for
the first time, the default Admin ID is
admin with the
password left blank.
Click
Next to proceed to the next page.
The Setup Wizard will appear and display the MAC address
and IP address of your camera(s). If you have a DHCP
server (i.e., router) on your network, a valid IP Address will
be displayed. If your network does not use a DHCP server,
the network camera's default static IP
192.168.0.20 will be
displayed.
Click the
Wizard button to continue.