2 d-link dcs-6111 user manual table of contents product overview ..............................................................4 package contents ......................................................................... 4 system requirements .............................................................
3 d-link dcs-6111 user manual table of contents reset and restore ............................................................82 external i/o port ..............................................................83 technical specifications ..................................................84 contacting...
4 d-link dcs-6111 user manual section 1 - product overview system requirements • windows® 7, or vista® • at least 256mb of memory (512mb recommended) • an available ethernet connection • internet explorer 6.X or higher • vga card resolution: 800 x 600 or above • cpu: 1.7ghz or above (2.8ghz plus pro...
5 d-link dcs-6111 user manual section 1 - product overview introduction the dcs-6111 is a fixed dome network camera for indoor, office or home use, and designed to target the middle- market. With an ultra wide dynamic range (wdr) cmos sensor, the dcs-6111 is used to provide better performance survei...
6 d-link dcs-6111 user manual section 1 - product overview • powerful surveillance - the dcs-6111 uses the wdr vga progressive cmos technology that delivers exceptional picture quality. The wide dynamic range capability achieves high resolution, more detailed images in high contrast lighting conditi...
7 d-link dcs-6111 user manual section 1 - product overview • supported protocols - the dcs-6111 supports ipv6, the latest version of the internet protocol and a wide variety of protocols such as rtsp, ftp, smtp, ntp, http and https. In addition, upnp ddns and lltd protocols are supported for windows...
8 d-link dcs-6111 user manual section 1 - product overview hardware overview connections reset button reset is initiated when the reset button is pressed once and held until the power led flashes through its cycle twice. Di/do focus controller adjustment screw tilt screw pan screw zoom controller au...
9 d-link dcs-6111 user manual section 1 - product overview hardware overview leds status led blinking red: indicates power is being supplied to the camera. Solid green: indicates that a connection has been established via ethernet port. Blinking green: indicates traffic movement in the camera. The s...
10 d-link dcs-6111 user manual section 2 - installation hardware installation when mounting to a ceiling find a suitable place to install the camera using the alignment stencil. Place the camera at the desired operating location and insert the screws through the two holes located at the base of the ...
11 d-link dcs-6111 user manual section 2 - installation network deployment general connection (without poe) connect the network camera to a switch via an ethernet cable. Connect the supplied power cable from the camera to a power outlet. Connection with a poe switch if using a poe switch, connect th...
12 d-link dcs-6111 user manual section 2 - installation turn on the computer and insert the d-link dcs-6111 autorun cd into the cd-rom drive. The following step-by-step instructions displayed are shown when using windows vista ® operating system. The steps and screens are similar when using other wi...
13 d-link dcs-6111 user manual section 2 - installation click i agree to accept the license agreement. Click i agree click the browse button if you would like to change the destination of installation. Otherwise, click install to continue. Note: installation may take several minutes to complete. Cli...
14 d-link dcs-6111 user manual section 2 - installation to start the installation click install. Note: the installation may take several minutes to complete. Click finish click finish to complete installation and the d-link installation wizard window will pop up for camera configuration. Click insta...
15 d-link dcs-6111 user manual section 3 - configuration click manual setup configuring your camera with the installation wizard if the d-link installation wizard window does not pop up after completion of software installation, click on the icon that was created in your windows start menu. The inst...
16 d-link dcs-6111 user manual section 3 - configuration click next enter a password, and confirm the password for your admin acccount and click next. Note: the default administrator username is admin and the password is left blank. The password can also be changed after installation..
17 d-link dcs-6111 user manual section 3 - configuration the pppoe setting screen displays. Enter the username and password provided by your isp to connect to the internet by pppoe. Click next and skip to the setup screen as seen in page 19. The network type screen displays will pop up to ask if you...
18 d-link dcs-6111 user manual section 3 - configuration check the get ip by dhcp server automatically box to obtain a new ip address every time the camera starts up. Click next to continue. Select upnp port forwarding if your router supports this function. If not, choose manual to manually enter yo...
19 d-link dcs-6111 user manual section 3 - configuration click next a window will pop up asking you if you want to access the dcs-6111 via mobile phone. Clicking yes will set the video resolution to 176x144. Click next to continue. Click yes.
20 d-link dcs-6111 user manual section 3 - configuration click apply to apply the settings listed in the window to the device. The application may take a few minutes to process. Click apply a window will pop up to confirm that the application was successfully configured. Click ok to continue. A new ...
21 d-link dcs-6111 user manual section 3 - configuration double-click dcs-6111 in the installation wizard window to launch the camera’s web configuration page. Note: please refer to the user manual for more information. Enter admin as the default username and leave the password blank by default. Cli...
22 d-link dcs-6111 user manual section 3 - configuration this section shows your camera’s live video. You can configure your settings using the buttons in the window. For more information on using the web configuration, please refer to the user manual..
23 d-link dcs-6111 user manual section 3 - configuration adjusting the lens based on the live image retrieved from the camera, adjust the camera lens by performing the following procedures: adjusting the viewing angle loosen the pan screw and turn the lens module left and right until the desired pos...
24 d-link dcs-6111 user manual section 3 - configuration attaching the enclosure once the lens is properly adjusted, rearrange the light shield so that it will not obstruct the lens during surveillance. Place the dome enclosure over the network camera so that the led sticker on the dome enclosure is...
25 d-link dcs-6111 user manual section 3 - configuration web-based configuration utility to access the configuration utility, open a web-browser such as internet explorer and enter the ip address of your network camera (http://192.168.0.120) note: in the example, this address is 192.168.0.120. Your ...
26 d-link dcs-6111 user manual section 3 - configuration live video as seen by mozilla firefox and netscape users, quick time player is invoked to stream the live video..
27 d-link dcs-6111 user manual section 3 - configuration using rtsp players quick time player real player vlc media player mpegable player pvplayer 1. Launch a rtsp player. 2. Choose file > open url. 3. Type the url command in the text box and then click ok. Url command = rtsp://:/ note: please refe...
28 d-link dcs-6111 user manual section 3 - configuration using 3gpp mobile phones to view streaming media using mobile phones, make sure the network camera is setup on the internet. To utilize this feature, please check the network settings for your camera. 1. Most of the players on 3gpp mobile phon...
29 d-link dcs-6111 user manual section 3 - configuration camera logout: logout the camera server and close the browser. Client settings: click this button to access the client settings. Snapshot: capture a still picture of a video. This section shows your camera’s live video. You can configure the s...
30 d-link dcs-6111 user manual section 3 - configuration 1/2 digital zoom - refer to the previous page for more information. 3/4 start/stop recording - click (#3) to start recording. Video clips will be recorded in mp4 format to your computer. Press the button again (#4) to stop recording. If you cl...
31 d-link dcs-6111 user manual section 3 - configuration snapshot this page shows a snapshot image of a live video taken from dcs-6111 network camera..
32 d-link dcs-6111 user manual section 3 - configuration stream options: media options: protocol options: udp protocol: udp unicast: udp multicast tcp: http protocol: record options: select which video stream profile to use. There are 3 selectable media options for your stream profile. The default s...
33 d-link dcs-6111 user manual section 3 - configuration setup wizard to quickly configure your network camera, click internet connection setup wizard. Otherwise, click manual internet connection setup to manually configure your network camera. To quickly configure your network camera’s motion detec...
34 d-link dcs-6111 user manual section 3 - configuration click next click next select pppoe if the camera is directly connected to the internet through a dsl modem and your isp (internet service provider) requires you to use pppoe for the internet connection. Click next to continue and skip to step ...
35 d-link dcs-6111 user manual section 3 - configuration click next click next if you have selected pppoe, enter your username and password. Click next to continue. Select static ip if your internet service provider has provided you with connection settings, or you wish to set a static address withi...
36 d-link dcs-6111 user manual section 3 - configuration click next click next click next with a dynamic dns account, the camera automatically updates your ip address. To enable ddns, enter your host information. Click next to continue. Enter a name for your camera and click next to continue. Config...
37 d-link dcs-6111 user manual section 3 - configuration click apply once you have selected dynamic, pppoe, or static, you will see a summary of your camera’s settings. Click apply to save and activate your settings..
38 d-link dcs-6111 user manual section 3 - configuration motion detection setup wizard this wizard will guide you through a step-by-step process to configure your new d-link camera’s motion detection functions. Click next to begin the process. Click next this screen will allow you to enable or disab...
39 d-link dcs-6111 user manual section 3 - configuration click next select the recording time and date for your camera. Click next to continue. Note: recording camera footage will take up space on your hard drive. It is recommended that you have sufficient disk space for always function. This step a...
40 d-link dcs-6111 user manual section 3 - configuration click apply you have completed the motion detection wizard. Click apply to activate and save your settings..
41 d-link dcs-6111 user manual section 3 - configuration lan settings: dhcp: static ip client: ip address: subnet mask: default gateway: primary dns: secondary dns: enable upnp presentation: settings for your local area network. Select this connection if you have a dhcp server running on your networ...
42 d-link dcs-6111 user manual section 3 - configuration enable upnp port forwarding: enable ipv6: ipv6 information: manually setup the ip address: optional ip address / prefix length. : enabling upnp port forwarding allows the network camera to open a secondary http port on the router. You have to ...
43 d-link dcs-6111 user manual section 3 - configuration optional default router : optional primary dns : pppoe settings: http: authentication: http port: secondary http port: access name for stream1: enter the ipv6 router address. Enter the ipv6 dns address. Enable this setting if your isp (dsl ser...
44 d-link dcs-6111 user manual section 3 - configuration access name for stream2: https port: ftp port: rtsp streaming: authentication: access name for stream1: access name for stream2: the default name is video2.Mjpg. Access name for stream 1 / access name for stream 2 : the access name is used to ...
45 d-link dcs-6111 user manual section 3 - configuration the accessibility of the rtsp streaming for the three authentication modes are listed in the following table. Quick time player real player vlc media player mpegable player pvplayer disable o o o o o basic o o x x x digest o x x x x o indicate...
46 d-link dcs-6111 user manual section 3 - configuration the port number that you use for rstp streaming, the default port number is 554. Rtp (real time protocol) port is used to streaming audio and video while rtcp (real time control protocol) port is used to monitor qos of rtp stream. Note: rtp vi...
47 d-link dcs-6111 user manual section 3 - configuration for example, if some content is associated with group 239.1.1.1, the source will send data packets destined to 239.1.1.1. Receivers for that content will inform the network that they are interested in receiving data packets sent to the group 2...
48 d-link dcs-6111 user manual section 3 - configuration enable ddns: server name: host name: username: password: status: click to enable the ddns function. Select your dynamic dns provider from the drop down menu. Enter the host name of the ddns server. Enter your username or e-mail used to connect...
49 d-link dcs-6111 user manual section 3 - configuration color: power line frequency: video orientation: agc: exposure level: enable auto iris: enable wdr (wide dynamic range): select either a color or b/w (black and white, monochrome) video display. Select either 50 or 60hz. Flip will vertically ro...
50 d-link dcs-6111 user manual section 3 - configuration switch to b/w (night mode): white balance: maximum exposure time: brightness: saturation: contrast: overlay title and time stamp on video: privacy mask: note: when you select this function, exposure level and agc functions will be disabled. Se...
51 d-link dcs-6111 user manual section 3 - configuration mode: frame size: maximum frame rate: video quality: mute: external microphone input: select either jpeg or mpeg4. In jpeg mode, the video frames are independent. However, mpeg4 consumes much less network bandwidth than jpeg. Select 176 x 144,...
52 d-link dcs-6111 user manual section 3 - configuration advanced audio coding (aac) is a wide band audio coding algorithm that exploits two primary coding strategies to dramatically reduce the amount of data needed to convey high-quality digital audio. Select a higher bit rate number for better aud...
53 d-link dcs-6111 user manual section 3 - configuration enable motion detection: window name: sensitivity: percentage: new: save: check this option to turn on the motion detection feature. Create your own name for the monitored area/ window. It will show at the top of the motion window. Set the mea...
54 d-link dcs-6111 user manual section 3 - configuration 1. Click new to add a new motion detection window. 2. Enter a name in the window name field. 3. Define the sensitivity to moving objects and the space ratio of all alerted pixels by moving the sensitivity and percentage slide bar. 4. Click sav...
55 d-link dcs-6111 user manual section 3 - configuration how does motion detection work? There are two parameters for setting the motion detection: sensitivity and percentage. In the illustration above, frame a and frame b are two sequential images. Pixel differences between the two frames are detec...
56 d-link dcs-6111 user manual section 3 - configuration current server time: time zone: enable daylight saving: daylight saving dates: automatic time configuration: ntp server: update interval: set the date and time manually: copy your computer’s time settings: displays current time. Select your ti...
57 d-link dcs-6111 user manual section 3 - configuration event setup there are four sections in event setup page. • event • server • media • recording 1. To add a new item - event, server or media, click add. A pop-up will appear and update the fields accordingly. 2. To delete the selected item from...
58 d-link dcs-6111 user manual section 3 - configuration application a typical application is that when motion is detected, the dcs-6111 network camera sends images to a ftp server or via e-mail as notifications. For example, as seen in the illustration below, an event can be triggered by many sourc...
59 d-link dcs-6111 user manual section 3 - configuration server name: email: ftp: http: network storage: unique name of your server. Select this to enable and apply your email account setting for your camera. Select this to access a granted folder on the external ftp server. Select this to use a web...
60 d-link dcs-6111 user manual section 3 - configuration media name: snapshot: source: send pre-event image(s) [0~7]: send post-event image(s) [0~7]: file name prefix: add date and time suffix to file name: video clip: source: pre-event recording: maximum duration: maximum file size: file name prefi...
61 d-link dcs-6111 user manual section 3 - configuration send post-event image (s) [0~7) specify to capture the number of images after a trigger is activated. A maximum of seven images can be generated. For example: if both the send pre-event images and send post-event images are set to seven, a tot...
62 d-link dcs-6111 user manual section 3 - configuration maximum duration specify the maximal recording duration in seconds. You can set up to ten seconds. For example: if the pre-event recording is set to five seconds and the maximum duration is set to ten seconds, the network camera continues to r...
63 d-link dcs-6111 user manual section 3 - configuration event name: enable this event: priority: delay: trigger: video motion detection: periodic: digital input: system boot: time: trigger d/o: enter a name for the event. Select to activate this event. Set the priority for this event. The event wit...
64 d-link dcs-6111 user manual section 3 - configuration recording entry name: enable this recording: priority: source: recording schedule: recording settings: destination: total cycling recording size size of each file for recording: file name prefix: the unique name of the entry. Select this to en...
65 d-link dcs-6111 user manual section 3 - configuration di and do: digital input trigger condition: digital output: settings for both digital input signal and digital output signal can be configured here. Please select high or low for digital input trigger condition. When an external device is conn...
66 d-link dcs-6111 user manual section 3 - configuration icr - ir-cut removable(icr) filter is a switch mechanical design of two different sensor filters. It provides the best light conditions both during the day and night. The following options are: icr auto: day mode: night mode: schedule mode: di...
67 d-link dcs-6111 user manual section 3 - configuration enable https secure connection: http & https: https only: select to enable a secure https connection. Select to enable the http and https services. By default, this option is enabled. Select this to automatically redirect an http connection to...
68 d-link dcs-6111 user manual section 3 - configuration method 3. Create certificate request and install: to upload a signed-certificate, ensure to create a certificate request. After creating the request, click browse to upload the certificate file which has been signed by the third party. Once up...
69 d-link dcs-6111 user manual section 3 - configuration allow list: delete allow list: deny list: delete deny list: always allow the ip address to access this device: the list of ip addresses that have the access rights to the camera. Remove the customized setting from the allow list. The list of i...
70 d-link dcs-6111 user manual section 3 - configuration for example: when the range of allowed list is set from 1.1.1.0 to 192.255.255.255 and the range of denied list is set from 1.1.1.0 to 170.255.255.255, only users’ ip located between 171.0.0.0 and 192.255.255.255 can access the network camera....
71 d-link dcs-6111 user manual section 3 - configuration maintenance device management admin password setup: add user account: username: password: privilege: manage user: authentication: camera name: modify the password for the administrator’s account. Add a new user account. Enter a username for th...
72 d-link dcs-6111 user manual section 3 - configuration turn off the led indicator: restore: reboot: select this option to turn off the led next to the lens. This will prevent anyone from observing the operation of the network camera. Click the restore button to reset the camera back to its factory...
73 d-link dcs-6111 user manual section 3 - configuration current firmware version: current firmware date: file path: upload: it will be automatically determined and displayed by the system. It will be automatically determined and displayed by the system. Locate the file (upgraded firmware) on your h...
74 d-link dcs-6111 user manual section 3 - configuration status device info this page displays all the details information about your device and network connection..
75 d-link dcs-6111 user manual section 3 - configuration enable remote log: log server settings: ip address: port: save: current log: click to enable this feature so that the camera can send camera log files to a remote server. Configure the settings for the log server. The ip address of the remote ...
76 d-link dcs-6111 user manual section 3 - configuration help.
77 d-link dcs-6111 user manual section 5 - frequently asked questions frequently asked questions network camera features 1. What is a fixed dome day & night network camera with wdr sensor? The fixed dome day & night network camera with wdr sensor is a stand-alone system connecting directly to an eth...
78 d-link dcs-6111 user manual section 3 - configuration network camera installation 1. Can the network camera be used outdoors? The fixed dome day & night network camera with wdr sensor is not weatherproof. It needs to be equipped with a weatherproof case for outdoor use but it is not recommended. ...
79 d-link dcs-6111 user manual section 3 - configuration 7. Why does the network camera work locally but not externally? • this might be caused by network firewall protection. The setting of the firewall may need to be changed in order for the fixed dome day & night network camera with wdr sensor to...
80 d-link dcs-6111 user manual appendix a - networking basics networking basics check your ip address after you install your new d-link adapter, by default, the tcp/ip settings should be set to obtain an ip address from a dhcp server (i.E. Wireless router) automatically. To verify your ip address, p...
81 d-link dcs-6111 user manual appendix a - networking basics statically assign an ip address if you are not using a dhcp capable gateway/access point, or you need to assign a static ip address, please follow the steps below: step 1 windows vista ® - click on start > control panel > network and inte...
Appendix b - reset and restore 82 d-link dcs-6111 user manual reset and restore restoring the factory defaults will result in the loss of any previous settings and will require running the installation wizard to return the dcs-6111 to a normal state. Reset button the hidden button in the pinhole bes...
83 d-link dcs-6111 user manual appendix b - external i/o port external i/o port di/do diagram pin 1~4 are used to connect with digital input and digital output devices. Refer to the following illustration for connection method. The dcs-6111 provides a general i/o terminal block with one digital inpu...
84 d-link dcs-6111 user manual appendix c - technical specifications technical specifications network protocol support • ipv4, ipv6, tcp/ip, rtsp/ rtp/ rtcp, http, https, smtp, ftp, ntp, dns, dhcp, upnp, ddns, pppoe, igmp, samba client, ip filtering, 3gpp, lltd built-in network interfaces • 10/100ba...
85 d-link dcs-6111 user manual appendix c - technical specifications * https streaming will reduce the video frame rate automatically. Audio • compression and bit rate: - gsm-amr speech compression, bit rate: 4.75 kbps ~12.2 kbps - mpeg-4 aac audio encoding, bit rate: 16 kbps ~128 kbps • interface: ...
86 d-link dcs-6111 user manual appendix d - contacting technical support contacting technical support u.S. And canadian customers can contact d-link technical support through our web site or by phone. Before you contact technical support, please have the following ready: • model number of the produc...
87 d-link dcs-6111 user manual appendix e - warranty warranty subject to the terms and conditions set forth herein, d-link systems, inc. (“d-link”) provides this limited warranty: • only to the person or entity that originally purchased the product from d-link or its authorized reseller or distribut...
88 d-link dcs-6111 user manual appendix e - warranty limited software warranty: d-link warrants that the software portion of the product (“software”) will substantially conform to d-link’s then current functional specifications for the software, as set forth in the applicable documentation, from the...
89 d-link dcs-6111 user manual appendix e - warranty • after an rma number is issued, the defective product must be packaged securely in the original or other suitable shipping package to ensure that it will not be damaged in transit, and the rma number must be prominently marked on the outside of t...
90 d-link dcs-6111 user manual appendix e - warranty if any implied warranty cannot be disclaimed in any territory where a product is sold, the duration of such implied warranty shall be limited to the duration of the applicable warranty period set forth above. Except as expressly covered under the ...
91 d-link dcs-6111 user manual appendix e - warranty ce mark warning: this is a class b product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Fcc statement: this equipment has been tested and found to comply w...
92 d-link dcs-6111 user manual appendix e - warranty for detailed warranty information applicable to products purchased outside the united states, please contact the corresponding local d-link office. Industry canada notice: this device complies with rss-210 of the industry canada rules. Operation i...
93 d-link dcs-6111 user manual appendix f - registration version 2.2 august 13, 2014 product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Registration.