This document will guide you through the basic installation process for your new d-link network camera. Dcs-7413 quick install guide full hd day & night outdoor network camera.
D-link dcs-7413 quick install guide 2 en g li sh this installation guide provides basic instructions for installing the dcs-7413 network camera on your network. For additional information about how to use the camera, please see the user manual which is available on the cd included in this package or...
D-link dcs-7413 quick install guide 3 en g li sh hardware overview 1 ethernet jack connect to a router or switch. Also used to power the camera using power over ethernet (poe). 2 power connector connects to a 12v dc power adapter. 3 audio out connect to external speakers. 4 audio in connect to a mic...
D-link dcs-7413 quick install guide 4 en g li sh insert your sd card into the camera with the gold contacts oriented towards the base of the camera. To eject the sd card, push the sd card into the slot. Sd card installation loosen the two screws and lift off the adjustable sun shield. 1 remove the b...
D-link dcs-7413 quick install guide 5 en g li sh please refer to the user manual (section 2 - assembly and installation) for detailed instructions regarding mounting of the camera using a mounting bracket. Note: to prevent the camera’s wire connectors from being damaged by water or other elements: 1...
D-link dcs-7413 quick install guide 6 en g li sh connection with a poe switch if you are using a poe switch, connect the ip camera to the switch via an ethernet cable, which will provide transmission of both power and data over a single cable. General connection using 24v ac power wiring 1. Connect ...
D-link dcs-7413 quick install guide 7 en g li sh configuration with wizard click setup wizard to begin the installation. Insert the dcs-7413 cd into your computer's cd-rom drive to begin the installation. If the autorun function on your computer is disabled, or if the d-link launcher fails to start ...
D-link dcs-7413 quick install guide 8 en g li sh click on the d-link setup wizard se icon that was created in your windows start menu. Start > d-link > setup wizard se take a moment to confirm your settings and click restart . Select dhcp if your camera obtains an ip address automatically when it bo...
D-link dcs-7413 quick install guide 9 en g li sh click on the d-link setup wizard se icon that was created in your windows start menu. Start > d-link > setup wizard se viewing camera via web browser this section shows your camera’s live video. You can select your video profile and view or operate th...
D-link dcs-7413 quick install guide 10 en g li sh notes.
D-link dcs-7413 quick install guide 11 en g li sh notes.
D-link dcs-7413 quick install guide 12 en g li sh version 2.0 october 18, 2013 ©2013 d-link corporation/d-link systems, inc. All rights reserved. D-link and the d-link logo are registered trademarks of d-link corporation or its subsidiaries in the united states and/or other countries. Other trademar...
