D-Link DCS-935L Quick Installation Manual - English

DCS-935L

4

ENGLISH

mOUNTING THE CAmErA

Please refer to the steps below to assist you with mounting the camera. It is recommended that you 

configure the camera before mounting.

mydlink POrTAL

After registering your DCS-935L camera with a mydlink account in the mydlink Lite mobile app, you 

will be able to remotely access your camera from the www.mydlink.com website. After signing in to 

your mydlink account, you will see a screen similar to the following:

Step 1:

Open Internet Explorer and go to 

http://www.mydlink.com, then sign into mydlink.

Step 2:

Select your camera from the device list, and your camera’s Live View will appear.

Step 2:

Place the mounting base over the screws that are mounted on the 

wall. Make sure to fit the screw-heads over the big holes and slide it 

downward to lock firmly. Lightly pull the base forward to make sure 

that it is locked. Adjust the angle of the camera as desired.

Step 1:

Depending on the material of the wall or ceiling, use proper tools to 

drill two holes 25mm deep, 40mm apart with a 6mm drill bit where 

you marked. Insert the screws into the holes. If the wall is made out 

of concrete, drill the holes first, then insert the plastic anchors to 

support the screws.

1

2