D-Link DES-1008P Quick Installation Manual - Quick Installation Guide
Quick Installation Guide
DES-1008P
DES-008P
8-Port Fast Ethernet
Switch with 4 Port PoE
CD-ROM
with Product Document
These are the items included with your DES-008P purchase:
Notice Before Setting Up the DES-1008P
Check Your Package Contents
8-Port 0/00 Mbps Switch with 4 Port PoE
To setup of the Switch can be performed using the following steps:
A.
Install the DES-1008P in a fairly cool and dry place. See Technical Specification for the
acceptable operation temperature and humidity ranges.
B.
Install the Switch in a site free from strong electromagnetic source, vibration, dust, and
direct sunlight.
C.
Leave at least 0 cm of space at the left and right hand side of the Switch for ventilation.
D.
Visually inspect the DC power jack and make sure that it is fully secured to the power
adapter.
Quick Installation Guide 48V,.45A Power
Adapter
Note :
Using a power supply with a different voltage rating
will damage and void the warranty of this product.
Do not stack any device on top of the Switch.
A.
Power:
Power is supplied through an external DC power adapter. Since the switch does not include
a power switch, plugging its power adapter into a power outlet will immediately power it on.
Connecting the DES-1008P Fast Ethernet Switch with 4 Port