D-link des-1026g 24-port 10/100mbps + 2-port combo ge copper/sfp ethernet switch manual version 5.00 october 10.2013 17.P6.202014805.
Table of contents 1. Package contents ............................................. 3 2. Introduction........................................................ 3 3. Installation.......................................................... 8 4. Technical specifications...................................11.
1. Package contents one des-1026g 24-port 10/100mbps + 2-port combo ge copper/sfp ethernet switch one ac power cord four rubber feet to be used for shock cushioning screws and two mounting brackets manual if any of the above items are missing, please contact your reseller . 2. Introduction...
100mbits/sec. An important technology incorporated by 100baset is its use of the carrier sense multiple access with collision detection (csma/cd) protocol - which is the same protocol that 10baset uses - because of its ability to work with several different types of cable, including basic twisted-pa...
Used to split parts of the network into different collision domains, making it possible to expand your fast ethernet network beyond the 205-meter network diameter limit for 100base-tx networks. Switches supporting both traditional 10mbps ethernet and 100mbps fast ethernet are also ideal for bridging...
Leds led stands for light-emitting diode. The front panel leds provides instant status feedback and simplifies monitoring and troubleshooting tasks led indicators of the switch power on when the power led light is on, the switch is receiving power. Off when the power led light is off, the power cord...
A gigabit ethernet network. Off when the led light is off, the respective port is connected to a 10/100mbps ethernet network, or no link. Connections front panel 10/100 base-tx twisted-pair ports led indicators giga combo ports 10/100 base-tx twisted-pair ports(port1~24) these ports support network ...
3. Installation the site where you place the des-1026g may greatly affect its performance. When installing, take the following into your consideration: install the des-1026g in a fairly cool and dry place. See technical specifications for the acceptable temperature and humidity operating ranges. ...
Connecting network cable the des-1026g supports 10/100/1000mbps gigabit ethernet and fiber connections. It runs in full/half duplex transfer mode for 10/100mbps and full duplex transfer mode for 1000mbps. Each port on the des-1026g supports auto-mdi/mdi-x. Auto-mdi/mdi-x is a feature that eliminates...
4. Technical specifications general standards ieee 802.3 10base-t ethernet ieee 802.3u 100 base-tx fast ethernet ieee 802.3ab 1000base-t gigabit ethernet ieee 802.3z 1000base-x protocol csma/cd data transfer rate ethernet: 10mbps (half duplex), 20mbps (full duplex) fast ethernet: 100mbps (half duple...
