1. DL manuals
  2. D-Link
  3. Switch
  4. DES-3010F
  5. Manual

D-Link DES-3010F Manual - Sntp Settings

Manual is about: Managed 8/16/24-port 10/100Mbps N-Way Fast Ethernet Switch

Summary of DES-3010F

  • Page 1

    D-link ™ des-3010f / des-3010g / des-3018 / des-3026 managed 8/16/24-port 10/100mbps fast ethernet switch with optional slots manual.

  • Page 2

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual _________________________________________________________________________________ information in this document is subject to change without notice. © 2005 d-link computer corporation. All rights reserved. Reproduction in any manner whatso...

  • Page 3: Table of Contents

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual table of contents preface..................................................................................................................................................... 7 intended readers ...............................................

  • Page 4

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual snmp settings ................................................................................................................................................................................ 28 traps..........................................

  • Page 5

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual vlans ..............................................................................................................................................................................65 understanding ieee 802.1p priority .......................

  • Page 6

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual client.......................................................................................................................................................................................... 95 authentication process ......................

  • Page 7

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual save changes ..................................................................................................................................................................139 appendix a ...................................................

  • Page 8: Preface

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual preface the des-3010f/g / des-3018 / des-3026 manual is divided into sections that describe the system installation and operating instructions with examples. Section 1, introduction - describes the switch and its features. Section 2, inst...

  • Page 9: Intended Readers

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual intended readers the des-3010f/g / des-3018 / des-3026 manual contains information for setup and management of the switch. This manual is intended for network managers familiar with network management concepts and terminology. Typographic...

  • Page 10: Safety Instructions

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual safety instructions use the following safety guidelines to ensure your own personal safety and to help protect your system from potential damage. Throughout this safety section, the caution icon ( ) is used to indicate cautions and precau...

  • Page 11: Products

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual • • • • • • • • • • to help prevent electric shock, plug the system and peripheral power cables into properly grounded electrical outlets. These cables are equipped with three-prong plugs to help ensure proper grounding. Do not use adapte...

  • Page 12

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual do not overload the ac supply branch circuit that provides power to the rack. The total rack load should not exceed 80 percent of the branch circuit rating. • • • ensure that proper airflow is provided to components in the rack. Do not st...

  • Page 13: Section 1

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual section 1 introduction ethernet technology switch description features ports front-panel components side panel description rear panel description gigabit combo ports ethernet technology fast ethernet technology the following manual descri...

  • Page 14

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual simple network time protocol support • • • • • • • • • • • • • • • • • • • • • • • • system and port utilization support system log support non-blocking store and forward switching scheme capability to support rate adaptation and protocol...

  • Page 15: Ethernet Technology

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual ethernet technology fast ethernet the growing importance of lans and the increasing complexity of desktop computing applications are fueling the need for high performance networks. A number of high-speed lan technologies are proposed to p...

  • Page 16

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual front-panel components and led indicators the front panel of the switch consists of led indicators for power, console, link/act and speed, 8/16/24 fast-ethernet, ports, two optional module ports (des-3018/3026 only), a gigabit 1000base-t ...

  • Page 17: Rear Panel Description

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual port 10 – for the 3010f, a solid green led indicates a transfer rate of 100mbps and a dark led indicates no link. For the 3010g, solid green led indicates a transfer rate of 1000mbps and a dark led indicates no link des-3018 / des-3026 – ...

  • Page 18: Section 2

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual section 2 installation package contents before you connect to the network installing the switch without the rack rack installation power on the optional module redundant power system package contents open the shipping carton of the switch...

  • Page 19

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual installing the switch without the rack when installing the switch on a desktop or shelf, the rubber feet included with the switch should first be attached. Attach these cushioning feet on the bottom at each corner of the device. Allow eno...

  • Page 20: The Optional Modules

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual the optional modules at the front right of the des-3018 and the des-3026 resides an optional module slot. These optional modules, specially designed for this switch series, may be used as an uplink to a server or core switch. This slot ma...

  • Page 21

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual caution : before adding the optional module, make sure to disconnect all power sources connected to the switch. Failure to do so may result in an electrical shock, which may cause damage, not only to the individual but to the switch as we...

  • Page 22: Section 3

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual section 3 connecting the switch switch to end node switch to hub or switch connecting to network backbone or server note: all high-performance n-way ethernet ports can support both mdi- ii and mdi-x connections. Switch to end node end nod...

  • Page 23: Switch to Hub Or Switch

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual switch to hub or switch these connections can be accomplished in a number of ways using a normal cable. A 10base-t hub or switch can be connected to the switch via a twisted-pair category 3, 4 or 5 utp/stp cable. • • • • a 100base-tx hub ...

  • Page 24

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual the des-3010f/g, des-3018 or des-3026 as a network backbone the des-3018 can be employed as a network backbone for offices or buildings that require many ethernet connections within a confined space. Once a high-speed line has been connec...

  • Page 25: Section 4

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual section 4 introduction to switch management management options web-based management interface snmp-based management managing user accounts command line console interface through the serial port connecting the console port (rs-232 dce) fir...

  • Page 26

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual to connect a terminal to the console port: 1. Connect the female connector of the rs-232 cable directly to the console port on the switch, and tighten the captive retaining screws. 2. Connect the other end of the cable to a terminal or to...

  • Page 27

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual figure 4- 1. Initial screen after first connection. First time connecting to the switch the switch supports user-based security that can allow you to prevent unauthorized users from accessing the switch or changing its settings. This sect...

  • Page 28

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual figure 4- 2. Initial screen, first time connecting to the switch press enter in both the username and password fields. You will be given access to the command prompt des-3018:4# , as shown below: there is no initial username or password. ...

  • Page 29: Password Protection

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual password protection the des-3018 switch does not have a default user name and password. One of the first tasks when settings up the switch is to create user accounts. If you log in using a predefined administrator-level user name, you hav...

  • Page 30

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual the des-3018 switch supports snmp versions 1, 2c, and 3. You can specify which version of snmp you want to use to monitor and control the switch. The three versions of snmp vary in the level of security provided between the management sta...

  • Page 31: Ip Address Assignment

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual ip address assignment each switch must be assigned its own ip address, which is used for communication with an snmp network manager or other tcp/ip application (for example bootp, tftp). The switch's default ip address is 10.90.90.90. You...

  • Page 32

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual figure 4- 5. Assigning the switch an ip address in the above example, the switch was assigned an ip address of 10.53.13.33 with a subnet mask of 255.0.0.0. The system message success indicates that the command was executed successfully. T...

  • Page 33: Section 5

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual section 5 introduction to web-based switch configuration introduction logging on to the web manager web-based user interface basic setup reboot basic switch setup network management switch utilities network monitoring igmp snooping status...

  • Page 34: Web-Based User Interface

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual figure 5- 2. Enter network password window leave both the user name field and the password field blank and click ok. This will open the web-based user interface. The switch management features available in the web-based manager are explai...

  • Page 35

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual area 2 area 1 area 3 figure 5- 3. Main web-manager screen area function area 1 select the menu or window to be displayed. The folder icons can be opened to display the hyperlinked menu buttons and subfolders contained within them. Click t...

  • Page 36: Web Pages

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual web pages when you connect to the management mode of the switch with a web browser, a login screen is displayed. Enter a user name and password to access the switch's management mode. Below is a list and description of the main folders av...

  • Page 37: Section 6

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual section 6 administration device information ip address port configuration user accounts port mirroring system log settings sntp settings tftp services ping test snmp manager sim settings forwarding and filtering device information the dev...

  • Page 38

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual figure 6- 1. Device information screen 37.

  • Page 39: Ip Address

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual ip address the ip address may initially be set using the console interface prior to connecting to it through the ethernet. If the switch ip address has not yet been changed, read the introduction of the command line interface reference ma...

  • Page 40

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual manual allows the entry of an ip address, subnet mask, and a default gateway for the switch. These fields should be of the form xxx.Xxx.Xxx.Xxx , where each xxx is a number (represented in decimal form) between 0 and 255. This address sho...

  • Page 41: Port Configurations

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual port configurations this section contains information for configuring various attributes and properties for individual physical ports, including port speed and address learning. Clicking on port configurations in the administration menu w...

  • Page 42

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual 1000m/full , 1000m/full_m and 1000m/full_s . Gigabit connections are only supported in full duplex connections and take on certain characteristics that are different from the other choices listed. The 1000m/full_m (master) and 1000m/full_...

  • Page 43: Port Description

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual port description the switch supports a port description feature where the user may name various ports on the switch. To assign names to various ports, click the port description on the administration menu: figure 6- 4. Port description se...

  • Page 44: User Accounts

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual user accounts use the user accounts management window to control user privileges. To view existing user accounts, open the security management folder and click on the user accounts link. This will open the user accounts page, as shown bel...

  • Page 45

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual admin and user privileges there are two levels of user privileges, admin and user . Some menu selections available to users with admin privileges may not be available to those with user privileges. The following table summarizes the admin...

  • Page 46: Port Mirroring

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual port mirroring the switch allows you to copy frames transmitted and received on a port and redirect the copies to another port. You can attach a monitoring device to the mirrored port, such as a sniffer or an rmon probe, to view details a...

  • Page 47: System Log Servers

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual system log servers the switch can send syslog messages to up to four designated servers using the system log host window. In the administration folder, click system log host , to view the screen shown below. Figure 6- 9. Current system lo...

  • Page 48

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual 2 mail system 3 system daemons 4 security/authorization messages 5 messages generated internally by syslog line printer subsystem 7 network news subsystem 8 uucp subsystem 9 clock daemon 10 security/authorization messages 11 ftp daemon 12...

  • Page 49: Sntp Settings

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual sntp settings time setting to configure the time settings for the switch, open the administration folder, then the sntp folder and click on the time setting link, revealing the following screen for the user to configure. Figure 6- 11. Cur...

  • Page 50

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual time zone and dst the following are screens used to configure time zones and daylight savings time settings for sntp. Open the administration folder, then the sntp folder and click on the time zone and dst link, revealing the following sc...

  • Page 51

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual from: month enter the month dst will start on. From: time in hh:mm enter the time of day that dst will start on. To: which day enter the week of the month the dst will end. To: day of week enter the day of the week that dst will end. To: ...

  • Page 52: Tftp Services

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual tftp services trivial file transfer protocol (tftp) services allow the switch’s firmware to be upgraded by transferring a new firmware file from a tftp server to the switch or vice versa. Use the pull-down menu to select the service to be...

  • Page 53: Snmp Manager

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual snmp manager snmp settings simple network management protocol (snmp) is an osi layer 7 (application layer) designed specifically for managing and monitoring network devices. Snmp enables network management stations to read and modify the ...

  • Page 54: Snmp User Table

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual the des-3018 supports the simple network management protocol (snmp) versions 1, 2c, and 3. The administrator can specify the snmp version used to monitor and control the switch. The three versions of snmp vary in the level of security pro...

  • Page 55

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual auth-protocol none - indicates that no authorization protocol is in use. Md5 - indicates that the hmac-md5-96 authentication level will be used. Sha - indicates that the hmac-sha authentication protocol will be used. Priv-protocol none - ...

  • Page 56: Snmp View Table

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual snmp view table the snmp view table is used to assign views to community strings that define which mib objects can be accessed by a remote snmp manager. To view the snmp view table , open the snmp manager folder, located in the administra...

  • Page 57: Snmp Group Table

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual snmp group table an snmp group created with this table maps snmp users (identified in the snmp user table ) to the views created in the previous menu. To view the snmp group table , open the snmp manager folder, located in the administrat...

  • Page 58

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual figure 6- 22. Snmp group table configuration – add window the following parameters can set: parameter description group name type an alphanumeric string of up to 32 characters. This is used to identify the new snmp group of snmp users. Re...

  • Page 59: Snmp Community Table

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual snmp community table use this table to create an snmp community string to define the relationship between the snmp manager and an agent. The community string acts like a password to permit access to the agent on the switch. One or more of...

  • Page 60: Snmp Host Table

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual snmp host table use the snmp host table to set up snmp trap recipients. Open the snmp manager folder, located in the administration folder, and click on the snmp host table link. This will open the snmp host table page, as shown below. To...

  • Page 61: Snmp Engine Id

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual snmp engine id the engine id is a unique identifier used for snmp v3 implementations. This is an alphanumeric string used to identify the snmp engine on the switch. To display the switch's snmp engine id, open the snmp manger folder, loca...

  • Page 62: D-Link Single Ip Management

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual d-link single ip management single ip management (sim) overview simply put, d-link single ip management is a concept that will stack switches together over ethernet instead of using stacking ports or modules. There are some advantages in ...

  • Page 63: Sim Using The Web Interface

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual after configuring one switch to operate as the cs of a sim group, additional switches may join the group through a direct connection to the commander switch. Only the commander switch will allow entry to the candidate switch enabled for s...

  • Page 64: Forwarding & Filtering

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual discovery interval the user may set the discovery protocol interval, in seconds that the switch will send out discovery packets. Returning information to a commander switch will include information about other switches connected to it. (e...

  • Page 65: Multicast Forwarding

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual multicast forwarding the following figure and table describe how to set up multicast forwarding on the switch. Open the forwarding & filtering folder in the administration menu, and click on the multicast forwarding link to see the entry ...

  • Page 66: Section 7

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual section 7 l2 features vlans trunking igmp snooping spanning tree vlans vlan description a virtual local area network (vlan) is a network topology configured according to a logical scheme rather than the physical layout. Vlans can be used ...

  • Page 67

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual vlans allow a network to be segmented in order to reduce the size of broadcast domains. All packets entering a vlan will only be forwarded to the stations (over ieee 802.1q enabled switches) that are members of that vlan, and this include...

  • Page 68

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual the tag is inserted into the packet header making the entire packet longer by 4 octets. All of the information originally contained in the packet is retained. Figure 7- 2. Ieee 802.1q tag the ethertype and vlan id are inserted after the m...

  • Page 69

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual ingress filtering a port on a switch where packets are flowing into the switch and vlan decisions must be made is referred to as an ingress port. If ingress filtering is enabled for a port, the switch will examine the vlan information in ...

  • Page 70

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual vlan and trunk groups the members of a trunk group have the same vlan setting. Any vlan setting on the members of a trunk group will apply to the other member ports. 69.

  • Page 71: Static Vlan Entry

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual static vlan entry in the l2 features folder, open the vlan folder and click the static vlan entry link to open the following window: figure 7- 4. 802.1q static vlans window the 802.1q static vlans menu lists all previously configured vlan...

  • Page 72

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual figure 7- 6. 802.1q static vlans - modify the following fields can then be set in either the add or modify 802.1q static vlans menus: parameter description vid (vlan id) allows the entry of a vlan id in the add dialog box, or displays the...

  • Page 73: Link Aggregation

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual link aggregation understanding port trunk groups port trunk groups are used to combine a number of ports together to make a single high-bandwidth data pipeline. The switch supports up to three port trunk groups with 2 to 8 ports in each g...

  • Page 74

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual the spanning tree protocol will treat a link aggregation group as a single link, on the switch level. On the port level, the stp will use the port parameters of the master port in the calculation of port cost and in determining the state ...

  • Page 75: Igmp Snooping

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual igmp snooping internet group management protocol (igmp) snooping allows the switch to recognize igmp queries and reports sent between network stations or devices and an igmp host. When enabled for igmp snooping, the switch can open or clo...

  • Page 76

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual parameter description vlan id this is the vlan id that, along with the vlan name , identifies the vlan for which to modify the igmp snooping settings . Vlan name this is the vlan name that, along with the vlan id , identifies the vlan for...

  • Page 77: Static Router Ports

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual static router ports a static router port is a port that has a multicast router attached to it. Generally, this router would have a connection to a wan or to the internet. Establishing a router port will allow multicast packets coming from...

  • Page 78: Spanning Tree

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual spanning tree this switch supports two versions of the spanning tree protocol; 802.1d stp and 802.1w rapid stp. 802.1d stp will be familiar to most networking professionals. However, since 802.1w rstp has been recently introduced to d-lin...

  • Page 79: Stp Bridge Global Settings

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual p2p port a p2p port is also capable of rapid transition. P2p ports may be used to connect to other bridges. Under rstp, all ports operating in full-duplex mode are considered to be p2p ports, unless manually overridden through configurati...

  • Page 80

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual the following parameters can be set: parameter description spanning tree protocol use the pull-down menu to enable or disable stp globally on the switch. The default is disabled . Bridge max age: (6 - 40 sec) the max age may be set to ens...

  • Page 81: Stp Port Settings

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual stp port settings stp can be set up on a port per port basis. To view the following window click l2 features > spanning tree > stp port settings : figure 7- 15. Stp port settings and table window in addition to setting spanning tree param...

  • Page 82

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual parameter description from/to a consecutive group of ports may be configured starting with the selected port. Cost ( 0 = auto) external cost - this defines a metric that indicates the relative cost of forwarding packets to the specified p...

  • Page 83: Section 8

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual section 8 qos port bandwidth 802.1p default priority 802.1p user priority qos scheduling mechanism qos output scheduling qos the switch supports 802.1p priority queuing quality of service. The following section discusses the implementatio...

  • Page 84: Understanding Qos

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual figure 8- 1. An example of the default qos mapping on the switch the picture above shows the default priority setting for the switch. Class-3 has the highest priority of the four priority classes of service on the switch. In order to impl...

  • Page 85

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual for strict priority-based scheduling, any packets residing in the higher priority classes of service are transmitted first. Multiple strict priority classes of service are emptied based on their priority tags. Only when these classes are ...

  • Page 86: Bandwidth Control

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual bandwidth control the bandwidth control settings are used to place a ceiling on the transmitting and receiving data rates for any selected port. In the l2 features folder, click qos > bandwidth control , to view the screen shown below. Fi...

  • Page 87: 802.1P Default Priority

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual 802.1p default priority the switch allows the assignment of a default 802.1p priority to each port on the switch. In the qos folder, click 802.1p default priority , to view the screen shown below. Figure 8- 3. 802.1p default priority and ...

  • Page 88: 802.1P User Priority

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual 802.1p user priority the switch allows the assignment of a class of service to each of the 802.1p priorities. In the qos folder, click 802.1p user priority to view the screen shown below. Figure 8- 4. 802.1p user priority window once you ...

  • Page 89: Qos Output Scheduling

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual qos output scheduling qos can be customized by changing the output scheduling used for the hardware classes of service in the switch. As with any changes to qos implementation, careful consideration should be given to how network traffic ...

  • Page 90: Section 9

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual section 9 security traffic control port lock entries port security 802.1x trusted host traffic segmentation the following section will aid the user in configuring security functions for the switch. The switch includes various functions fo...

  • Page 91

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual to configure traffic control , first select a group of ports by using the group pull down menu. Finally, enable or disable the broadcast storm , multicast storm and destination unknown using their corresponding pull-down menus. The purpos...

  • Page 92: Port Security

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual port security a given ports’ (or a range of ports') dynamic mac address learning can be locked such that the current source mac addresses entered into the mac address forwarding table can not be changed once the port lock is enabled. The ...

  • Page 93: Port Lock Entries

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual port lock entries the port lock entry delete window is used to remove an entry from the port security entries learned by the switch and entered into the forwarding database. To view the following window, click configuration > port lock en...

  • Page 94: 802.1X

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual 802.1x 802.1x port-based and mac-based access control the ieee 802.1x standard is a security measure for authorizing and authenticating users to gain access to various wired or wireless devices on a specified local area network by using a...

  • Page 95

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual authentication server the authentication server is a remote device that is connected to the same network as the client and authenticator, must be running a radius server program and must be configured properly on the authenticator (switch...

  • Page 96

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual figure 9- 6. The authenticator client the client is simply the endstation that wishes to gain access to the lan or switch services. All endstations must be running software that is compliant with the 802.1x protocol. For users running win...

  • Page 97

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual authentication process utilizing the three roles stated above, the 802.1x protocol provides a stable and secure way of authorizing and authenticating users attempting to access the network. Only eapol traffic is allowed to pass through th...

  • Page 98: Access Control

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual understanding 802.1x port-based and mac-based network access control the original intent behind the development of 802.1x was to leverage the characteristics of point-to-point in lans. As any single lan segment in such infrastructures has...

  • Page 99

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual mac-based network access control 802.1x client network access controlled port network access uncontrolled port radius server ethernet switch 802.1x client 802.1x client 802.1x client 802.1x client 802.1x client 802.1x client 802.1x client...

  • Page 100

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual 802.1x authenticator settings to configure the 802.1x authenticator settings, click security > 802.1x > 802.1x authenticator settings. Figure 9- 11. 802.1x authenticator settings window to configure the settings by port, click on the hype...

  • Page 101

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual parameter description from [ ] to [ ] enter the port or ports to be set. Admctrldir sets the administrative-controlled direction to either in or both . If in is selected, control is only exerted over incoming traffic through the port you ...

  • Page 102

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual local users to configure local users for 802.1x, click security > 802.1x > local users. This window will allow the user to set different 802.1x local users on the switch. Figure 9- 13. 802.1x local user table configuration and 802.1x loca...

  • Page 103

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual configure the following 802.1x capability settings: parameter description from and to ports being configured for 802.1x settings. Capability two role choices can be selected: authenticator - a user must pass the authentication process to ...

  • Page 104

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual backend state the backend authentication state will display one of the following: request, response, success, fail, timeout, idle or initialize. Open dir the operational controlled directions are both and in . Port status the status of th...

  • Page 105

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual reauthenticate port(s) for port based 802.1x this window allows you to reauthenticate a port or group of ports by choosing a port or group of ports by using the pull down menus from and to and clicking apply . The reauthenticate port tabl...

  • Page 106

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual reauthenticate port(s) for mac-based 802.1x to reauthenticate ports for the mac side of 802.1x, the user must first enable 802.1x by mac address in the advanced settings window. Click security > 802.1x > reauthenticate port(s) to view the...

  • Page 107

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual parameter description succession choose the desired radius server to configure: first, second or third . Radius server set the radius server ip. Authentic port set the radius authentic server(s) udp port. The default port is 1812. Account...

  • Page 108: Trusted Host

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual trusted host go to the security folder and click on the trusted host link; the following screen will appear. Figure 9- 20. Security ip window use the security ip management to permit remote stations to manage the switch. If you choose to ...

  • Page 109

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual click on the setup button to open the setup forwarding ports page, as shown below. Figure 9- 22. Setup forwarding ports window this page allows you to determine which port on a given switch in a switch stack will be allowed to forward pac...

  • Page 110: Section 10

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual section 10 monitoring cpu utilization port utilization packets packet errors packet size mac address switch log igmp snooping group browse router port browse arp table session table port access control cpu utilization the cpu utilization ...

  • Page 111: Port Utilization

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual parameter description time interval [1s ] select the desired setting between 1s and 60s, where "s" stands for seconds. The default value is one second. Record number [200] select number of times the switch will be polled between 20 and 20...

  • Page 112: Packets

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual packets the web manager allows various packet statistics to be viewed as either a line graph or a table. Six windows are offered. Received (rx) click the received (rx) link in the packets folder of the monitoring menu to view the followin...

  • Page 113

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual figure 10- 4. Rx packets analysis table the following fields may be set or viewed: parameter description time interval [1s ] select the desired setting between 1s and 60s, where "s" stands for seconds. The default value is one second. Rec...

  • Page 114: Umb Cast (Rx)

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual umb cast (rx) click the umb cast (rx) link in the packets folder of the monitoring menu to view the following graph of umb cast packets received on the switch. To select a port to view these statistics for, use the port pull down menu. Th...

  • Page 115

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual figure 10- 5. Rx packets analysis window (table for unicast, multicast, and broadcast packets) the following fields may be set or viewed: parameter description time interval [1s] select the desired setting between 1s and 60s, where "s" st...

  • Page 116: Transmitted (Tx)

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual transmitted (tx) click the transmitted (tx) link in the packets folder of the monitoring menu to view the following graph of packets transmitted from the switch. To select a port to view these statistics for, use the port pull down menu. ...

  • Page 117

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual figure 10- 7. Tx packets analysis window (table for bytes and packets) the following fields may be set or viewed: parameter description time interval [1s] select the desired setting between 1s and 60s, where "s" stands for seconds. The de...

  • Page 118: Errors

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual errors the web manager allows port error statistics compiled by the switch's management agent to be viewed as either a line graph or a table. Four windows are offered. Received (rx) click the received (rx) link in the error folder of the ...

  • Page 119

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual figure 10- 9. Rx error analysis window (table) the following fields can be set: parameter description time interval [1s] select the desired setting between 1s and 60s, where "s" stands for seconds. The default value is one second. Record ...

  • Page 120: Transmitted (Tx)

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual transmitted (tx) click the transmitted (tx) link in the error folder of the monitoring menu to view the following graph of error packets received on the switch. To select a port to view these statistics for, select the port by using the p...

  • Page 121

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual the following fields may be set or viewed: parameter description time interval [1s ] select the desired setting between 1s and 60s, where "s" stands for seconds. The default value is one second. Record number [200] select number of times ...

  • Page 122: Packet Size

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual packet size the web manager allows packets received by the switch, arranged in six groups and classed by size, to be viewed as either a line graph or a table. Two windows are offered. To select a port to view these statistics for, select ...

  • Page 123

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual the following fields can be set or viewed: parameter description time interval [1s] select the desired setting between 1s and 60s, where "s" stands for seconds. The default value is one second. Record number [200] select number of times t...

  • Page 124: Mac Address

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual mac address this allows the switch's dynamic mac address forwarding table to be viewed. When the switch learns an association between a mac address and a port number, it makes an entry into its forwarding table. These entries are then use...

  • Page 125

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual mac address the mac address entered into the address table. Port the port to which the mac address above corresponds. Type describes the method which the switch discovered the mac address. The possible entries are dynamic, self, and stati...

  • Page 126: Switch History Log

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual switch history log the web manager allows the switch's history log, as compiled by the switch's management agent, to be viewed. To view the switch history log, open the monitoring folder and click the switch history log link. Figure 10- 1...

  • Page 127: Igmp Snooping Group

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual igmp snooping group this window allows the switch’s igmp snooping group table to be viewed. Igmp snooping allows the switch to read the multicast group ip address and the corresponding mac address from igmp packets that pass through the s...

  • Page 128: Browse Router Port

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual browse router port this displays which of the switch’s ports are currently configured as router ports. A router port configured by a user (using the console or web-based management interfaces) is displayed as a static router port, designa...

  • Page 129: Port Access Control

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual port access control the following screens are used to monitor 802.1x statistics of the switch, on a per port basis. To view the port access control screens, open the monitoring folder and click the port access control folder. There are si...

  • Page 130

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual roundtriptime the time interval (in hundredths of a second) between the most recent access- reply/access-challenge and the access-request that matched it from this radius authentication server. Accessretrans the number of radius access-re...

  • Page 131: Radius Accounting

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual radius accounting this window shows managed objects used for managing radius accounting clients, and the current statistics associated with them. It has one row for each radius authentication server that the client shares a secret with. T...

  • Page 132: Authenticator Diagnostics

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual authenticator diagnostics this table contains the diagnostic information regarding the operation of the authenticator associated with each port. An entry appears in this table for each port that supports the authenticator function. To vie...

  • Page 133

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual being received from the supplicant. Eaplogoffauthenticating counts the number of times that the state machine transitions from authenticating to aborting, as a result of an eapol-logoff message being received from the supplicant. Reauthsa...

  • Page 134

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual authenticator session statistics this table contains the session statistics objects for the authenticator pae associated with each port. An entry appears in this table for each port that supports the authenticator function. To view the au...

  • Page 135: Authenticator Statistics

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual octets rx the number of octets received in user data frames on this port during the session. Octets tx the number of octets transmitted in user data frames on this port during the session. Id a unique identifier for the session, in the fo...

  • Page 136

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual frames tx the number of eapol frames that have been transmitted by this authenticator. Rx start the number of eapol start frames that have been received by this authenticator. Txreqid the number of eap req/id frames that have been transmi...

  • Page 137: Authenticator State

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual authenticator state the following section describes the 802.1x status on the switch. To view the authenticator state, click monitoring > port access control > authenticator state. Figure 10- 25. Authenticator state window – port-based 802...

  • Page 138

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual figure 10- 26. Authenticator state window – mac-based 802.1x this window displays the authenticator state for individual ports on a selected device. A polling interval between 1 and 60 seconds can be set using the drop-down menu at the to...

  • Page 139: Reset

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual reset the reset function has several options when resetting the switch. Some of the current configuration parameters can be retained while resetting all other configuration parameters to their factory defaults. Note: only the reset system...

  • Page 140: Reboot System

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual reboot system the following menu is used to restart the switch. Figure 10- 28. Reboot system window clicking the yes click-box will instruct the switch to save the current configuration to non-volatile ram before restarting the switch. Cl...

  • Page 141: Appendix A

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual appendix a physical and environmental ac input & external redundant power supply: 100 – 120; 200 - 240 vac, 50/60 hz (internal universal power supply) power consumption: des-3010f – 10.7w des-3010g – 9.9w des-3018 – 10.5w des-3026 – 11.6w...

  • Page 142

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual general fast ethernet gigabit ethernet 100mbps 200mbps n/a 2000mbps network cables: 10base-t: 100base-tx: 2-pair utp cat. 3,4,5 (100 m) eia/tia- 568 100-ohm stp (100 m) 2-pair utp cat. 5 (100 m) eia/tia-568 100-ohm stp (100 m) number of p...

  • Page 143: Appendix B

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual appendix b cables and connectors when connecting the switch to another switch, a bridge or hub, a normal cable is necessary. Please review these products for matching cable pin assignment. The following diagrams and tables show the standa...

  • Page 144: Appendix C

    Des-3010f/g / des-3018 / des-3026 fast ethernet switch manual appendix c cable lengths use the following table to as a guide for the maximum cable lengths. Standard media type maximum distance mini-gbic 1000base-lx, single-mode fiber module 1000base-sx, multi-mode fiber module 1000base-lhx, single-m...

  • Page 145: Glossary

    Glossary 1000base-sx: a short laser wavelength on multimode fiber optic cable for a maximum length of 550 meters 1000base-lx: a long wavelength for a "long haul" fiber optic cable for a maximum length of 10 kilometers 100base-fx : 100mbps ethernet implementation over fiber. 100base-tx: 100mbps ether...

  • Page 146

    Latency: the delay between the time a device receives a packet and the time the packet is forwarded out of the destination port. Line speed : see baud rate. Main port: the port in a resilient link that carries data traffic in normal operating conditions. Mdi - medium dependent interface: an ethernet...

  • Page 147: Warranties and Registration

    Warranties and registration limited warranty d-link provides this limited warranty for its product only to the person or entity who originally purchased the product from d-link or its authorized reseller or distributor. D-link would fulfill the warranty obligation according to the local warranty pol...

  • Page 148

    Submitting a claim. Any claim under this limited warranty must be submitted in writing before the end of the warranty period to an authorized d-link service office. The claim must include a written description of the hardware defect or software nonconformance in sufficient detail to allow d-link to ...

  • Page 149: Fcc Warning

    Trademarks copyright 2005 d-link corporation. Contents subject to change without prior notice. D-link is a registered trademark of d- link corporation/d-link systems, inc. All other trademarks belong to their respective proprietors. Copyright statement no part of this publication may be reproduced i...

  • Page 150

    Subject to the terms and conditions set forth herein, d-link systems, inc. (“d-link”) provides this limited warranty: • only to the person or entity that originally purchased the product from d-link or its authorized reseller or distributor, and • only for products purchased and delivered within the...

  • Page 151

    D-link may reject or return any product that is not packaged and shipped in strict compliance with the foregoing requirements, or for which an rma number is not visible from the outside of the package. The product owner agrees to pay d-link’s reasonable handling and return shipping charges for any p...

  • Page 152

    Product registration register your d-link product online at http://support.Dlink.Com/register product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. 151.

  • Page 153

    D-link europe limited product warranty general terms the limited product warranty set forth below is given by d-link (europe) ltd. (herein referred to as "d-link"). This limited product warranty is only effective upon presentation of the proof of purchase. Upon further request by d-link, this warran...

  • Page 154

    D-link europe limited produktgarantie allgemeine bedingungen die hierin beschriebene eingeschränkte garantie wird durch d-link (europe) ltd. Gewährt (im folgenden: „d-link“). Diese eingeschränkte garantie setzt voraus, dass der kauf des produkts nachgewiesen wird. Auf verlangen von d-link muss auch ...

  • Page 155

    D-link europe a limité la garantie des produits conditions générales la garantie produit limitée énoncée ci-dessous émane de d-link (europe) ltd. (ci-après « d-link »). Cette garantie produit limitée n’est valable que sur présentation de la preuve d’achat. D-link peut également exiger la présentatio...

  • Page 156

    Garantía limitada del producto d-link europa condiciones generales esta garantía la ofrece d-link (europe) ltd. (en este documento, "d-link"). La garantía limitada del producto sólo es válida si se acompaña del comprobante de la compra. También deberá presentarse la tarjeta de garantía si d-link lo ...

  • Page 157

    D-link europe termini di garanzia dei prodotti generalità la presente garanzia viene fornita da d-link (europe) ltd. (di seguito denominata "d-link"). Essa viene riconosciuta solo se accompagnata dalla prova di acquisto. D-link può richiedere anche l’esibizione della presente cartolina di garanzia. ...

  • Page 158: Technical Support

    Technical support you can find software updates and user documentation on the d-link website. Tech support for customers within australia: d-link technical support over the telephone: 1300-766-868 monday to friday 8:00am to 8:00pm est saturday 9:00am to 1:00pm est d-link technical support over the i...

  • Page 159: Technical Support

    Technical support you can find software updates and user documentation on the d-link website. Tech support for customers within south eastern asia and korea: d-link south eastern asia and korea technical support over the telephone: +65-6895-5355 monday to friday 9:00am to 12:30pm, 2:00pm-6:00pm sing...

  • Page 160: Technical Support

    Technical support you can find software updates and user documentation on the d-link website. Tech support for customers within india d-link technical support over the telephone: +91-22-26526741 +91-22-26526696 –ext 161 to 167 monday to friday 9:30am to 7:00pm d-link technical support over the inter...

  • Page 161: Technical Support

    Technical support you can find software updates and user documentation on the d-link website. D-link provides free technical support for customers for the duration of the warranty period on this product. Customers can contact d-link technical support through our web site or by phone. Tech support fo...

  • Page 162: Technical Support

    Technical support you can find software updates and user documentation on the d-link website. Tech support for customers within the u.A.E & north africa: d-link technical support over the telephone: (971) 4-391-6480 (u.A.E) sunday to wednesday 9:00am to 6:00pm gmt+4 thursday 9:00am to 1:00pm gmt+4 d...

  • Page 163: Technical Support

    Technical support you can find software updates and user documentation on the d-link website. Tech support for customers within south africa and sub sahara region: d-link south africa and sub sahara technical support over the telephone: +27-12-665-2165 08600 dlink ( for south africa only ) monday to...

  • Page 164: Technical Support

    Technical support you can find updates and user documentation on the d-link website tech support for latin america customers: d-link technical support over the followings telephones: argentina: 0800-666 1442 monday to friday 09:00am to 22:00pm chile: 800-214 422 monday to friday 08:00am to 21:00pm c...

  • Page 165: Техническая

    Техническая поддержка Обновления программного обеспечения и документация доступны на Интернет - сайте d-link. D-link предоставляет бесплатную поддержку для клиентов в течение гарантийного срока . Клиенты могут обратиться в группу технической поддержки d-link по телефону или через Интернет . Техничес...

  • Page 166: Asistencia Técnica

    Asistencia técnica d-link latin américa pone a disposición de sus clientes, especificaciones, documentación y software mas reciente a través de nuestro sitio web www.Dlinklatinamerica.Com el servicio de soporte técnico tiene presencia en numerosos países de la región latino américa, y presta asisten...

  • Page 167: Suporte Técnico

    Suporte técnico voc ê pode encontrar atualiza çõ es de software e documenta çã o de usu á rio no site da d-link brasil www.Dlinkbrasil.Com.Br. A d-link fornece suporte t é cnico gratuito para clientes no brasil durante o per í odo de vig ê ncia da garantia deste produto. Suporte t é cnico para clien...

  • Page 168

    167.

  • Page 169: Technical Support

    Technical support you can find software updates and user documentation on the d- link website. D-link provides free technical support for customers within the united states and within canada for the duration of the warranty period on this product. U.S. And canadian customers can contact d-link techn...

  • Page 170: Technical Support

    Technical support you can find software updates and user documentation on the d-link websites. D-link provides free technical support for customers within canada, the united kingdom, and ireland. Customers can contact d-link technical support through our websites, or by phone. For customers within t...

  • Page 171: Technische Unterstützung

    Technische unterstützung aktualisierte versionen von software und benutzerhandbuch finden sie auf der website von d-link. D-link bietet kostenfreie technische unterstützung für kunden innerhalb deutschlands, Österreichs, der schweiz und osteuropas. Unsere kunden können technische unterstützung über ...

  • Page 172: Assistance Technique

    Assistance technique vous trouverez la documentation et les logiciels les plus récents sur le site web d-link. Le service technique de d-link est gratuit pour les clients aux etats-unis durant la période de garantie. Ceux-ci peuvent contacter le service technique de d-link par notre site internet ou...

  • Page 173: Asistencia Técnica

    Asistencia técnica puede encontrar el software más reciente y documentación para el usuario en el sitio web de d-link . D-link ofrece asistencia técnica gratuita para clientes dentro de españa durante el periodo de garantía del producto. Los clientes españoles pueden ponerse en contacto con la asist...

  • Page 174: Supporto Tecnico

    Supporto tecnico gli ultimi aggiornamenti e la documentazione sono disponibili sul sito d-link. Supporto tecnico per i clienti residenti in italia d-link mediterraneo s.R.L. Via n. Bonnet 6/b 20154 milano supporto tecnico dal lunedì al venerdì dalle ore 9.00 alle ore 19.00 con orario continuato tele...

  • Page 175: Technical Support

    Technical support you can find software updates and user documentation on the d-link website. D-link provides free technical support for customers within benelux for the duration of the warranty period on this product. Benelux customers can contact d-link technical support through our website, or by...

  • Page 176: Pomoc Techniczna

    Pomoc techniczna najnowsze wersje oprogramowania i dokumentacji u ż ytkownika mo ż na znale źć w serwisie internetowym firmy d-link. D-link zapewnia bezp ł atn ą pomoc techniczn ą klientom w polsce w okresie gwarancyjnym produktu. Klienci z polski mog ą si ę kontaktowa ć z dzia ł em pomocy techniczn...

  • Page 177: Technická Podpora

    Technická podpora aktualizované verze software a uživatelských p ř íru č ek najdete na webové stránce firmy d-link. D-link poskytuje svým zákazník ů m bezplatnou technickou podporu zákazníci mohou kontaktovat odd ě lení technické podpory p ř es webové stránky, mailem nebo telefonicky web: http://www...

  • Page 178: Technikai Támogatás

    Technikai támogatás meghajtó programokat és frissítéseket a d-link magyarország weblapjáról tölthet le. Telefonon technikai segítséget munkanapokon hétf ő t ő l- csütörtökig 9.00 – 16.00 óráig és pénteken 9.00 – 14.00 óráig kérhet a (1) 461-3001 telefonszámon vagy a support@dlink.Hu emailcímen. Magy...

  • Page 179: Teknisk Support

    Teknisk support du kan finne programvare oppdateringer og bruker dokumentasjon på d-links web sider. D-link tilbyr sine kunder gratis teknisk support under produktets garantitid. Kunder kan kontakte d-links teknisk support via våre hjemmesider, eller på tlf. Teknisk support: d-link teknisk telefon s...

  • Page 180: Teknisk Support

    Teknisk support du finder software opdateringer og bruger- dokumentation på d-link’s hjemmeside. D-link tilbyder gratis teknisk support til kunder i danmark i hele produktets garantiperiode. Danske kunder kan kontakte d-link’s tekniske support via vores hjemmeside eller telefonisk. D-link teknisk su...

  • Page 181: Teknistä Tukea Asiakkaille

    Teknistä tukea asiakkaille suomessa: d-link tarjoaa teknistä tukea asiakkailleen. Tuotteen takuun voimassaoloajan. Tekninen tuki palvelee seuraavasti: arkisin klo. 9 - 21 numerosta 0800-114 677 internetin kautta ajurit ja lisätietoja tuotteista. Http://www.Dlink.Fi sähköpostin kautta voit myös tehdä...

  • Page 182: Teknisk Support

    Teknisk support på vår hemsida kan du hitta mer information om mjukvaru uppdateringar och annan användarinformation. D-link tillhandahåller teknisk support till kunder i sverige under hela garantitiden för denna produkt. Teknisk support för kunder i sverige: d-link teknisk support via telefon: 0770-...

  • Page 183

    182.

  • Page 184: International Offices

    International offices u.S.A 17595 mt. Herrmann street fountain valley, ca. 92708 tel: 714-885-6000 fax 866-743-4905 url: www.Dlink.Com canada 2180 winston park drive oakville, ontario, l6h 5w1 canada tel: 1-905-8295033 fax: 1-905-8295223 url: www.Dlink.Ca europe (u. K.) 4th floor, merit house edgwar...

  • Page 185

    Registration card all countries and regions excluding usa print, type or use block letters. Your name: mr./ms _____________________________________________________________________________ organization: ________________________________________________ dept. ____________________________ your title at ...

  • Page 186

    185.