1. DL manuals
  2. D-Link
  3. Switch
  4. DES-3010F
  5. Manual

D-Link DES-3010F Manual - Packet Size

Manual is about: Managed 8/16/24-port 10/100Mbps N-Way Fast Ethernet Switch

Summary of DES-3010F

  • Page 1

    D-link ™ des-3010f / des-3010fl / des-3010g / des-3018 / des-3026 managed 8/16/24-port 10/100mbps fast ethernet switch with optional slots release iii manual.

  • Page 2

    _________________________________________________________________________________ information in this document is subject to change without notice. © 2006 d-link corporation. All rights reserved. Reproduction in any manner whatsoever without the written permission of d-link computer corporation is s...

  • Page 3: Table of Contents

    Table of contents preface....................................................................................................................................................Ix intended readers ..............................................................................................................

  • Page 4

    Snmp settings ................................................................................................................................................................................ 19 traps........................................................................................................

  • Page 5

    D-link single ip management..........................................................................................................................................58 single ip management (sim) overview....................................................................................................

  • Page 6

    Port transition states ................................................................................................................................................................. 86 edge port..........................................................................................................

  • Page 7

    Initializing ports for mac based 802.1x ................................................................................................................................. 128 reauthenticate port(s) for port based 802.1x.....................................................................................

  • Page 8

    Warranties and registration ............................................................................................................................................173 technical support..................................................................................................................

  • Page 9: Preface

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual preface the des-3010f/des-3010fl/des-3010g/des-3018/des-3026 user manual is divided into sections that describe the system installation and operating instructions with examples. Section 1, introduction - describes the switc...

  • Page 10: Intended Readers

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual intended readers the des-3010f/des-3010fl/des-3010g/des-3018/des-3026 user manual contains information for setup and management of the switch. This manual is intended for network managers familiar with network management co...

  • Page 11: Safety Instructions

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual safety instructions use the following safety guidelines to ensure your own personal safety and to help protect your system from potential damage. Throughout this safety section, the caution icon ( ) is used to indicate caut...

  • Page 12: Products

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual • • • • • • • • • • to help prevent electric shock, plug the system and peripheral power cables into properly grounded electrical outlets. These cables are equipped with three-prong plugs to help ensure proper grounding. Do...

  • Page 13

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual do not overload the ac supply branch circuit that provides power to the rack. The total rack load should not exceed 80 percent of the branch circuit rating. • • • ensure that proper airflow is provided to components in the ...

  • Page 14: Section 1

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual section 1 introduction ethernet technology switch description features ports front-panel components side panel description rear panel description gigabit combo ports ethernet technology fast ethernet technology the followin...

  • Page 15

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual single ip management support • • • • • • • • • • • • • • • • • • • • • • • • • • • simple network time protocol support system and port utilization support system log support non-blocking store and forward switching scheme ...

  • Page 16: Ethernet Technology

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual ethernet technology fast ethernet the growing importance of lans and the increasing complexity of desktop computing applications are fueling the need for high performance networks. A number of high-speed lan technologies ar...

  • Page 17

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual front-panel components and led indicators the front panel of the switch consists of led indicators for power, console, link/act and speed, 8/16/24 fast-ethernet, ports, two optional module ports (des-3018/3026 only), a giga...

  • Page 18

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual comprehensive led indicators display the status of the switch and the network. Led or button description power this led will light green after the switch is powered on to indicate the normal operation of the switch’s power ...

  • Page 19: Rear Panel Description

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual rear panel description the rear panels of these switches contain an ac power connector. Figure 1- 5. Rear panel of the des-3010f/fl/g and des-3018/des-3026 side panel description both panels of the switch contain a heat ven...

  • Page 20: Section 2

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual section 2 installation package contents before you connect to the network installing the switch without the rack rack installation power on the optional module redundant power system package contents open the shipping carto...

  • Page 21

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual installing the switch without the rack when installing the switch on a desktop or shelf, the rubber feet included with the switch should first be attached. Attach these cushioning feet on the bottom at each corner of the de...

  • Page 22: The Optional Modules

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual the optional modules at the front right of the des-3018 and the des-3026 resides an optional module slot. These optional modules, specially designed for this switch series, may be used as an uplink to a server or core switc...

  • Page 23

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual - single-port 100base-fx fast ethernet uplink module - compliant with ieee802.3u - link and act(ivity) led - supports forced 100m, full-duplex and ieee802.3x compliant flow control for full-duplex - sc type connector good o...

  • Page 24

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual figure 2- 10. Inserting the optional module into the switch. The upgraded des-3018 / des-3026 is now ready for use. 11.

  • Page 25: Section 3

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual section 3 connecting the switch switch to end node switch to hub or switch connecting to network backbone or server note: all high-performance n-way ethernet ports can support both mdi- ii and mdi-x connections. Switch to e...

  • Page 26: Switch to Hub Or Switch

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual switch to hub or switch these connections can be accomplished in a number of ways using a normal cable. A 10base-t hub or switch can be connected to the switch via a twisted-pair category 3, 4 or 5 utp/stp cable. • • • • a ...

  • Page 27

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual the des-3010f/fl/g, des-3018 or des-3026 as a network backbone the des-3018 can be employed as a network backbone for offices or buildings that require many ethernet connections within a confined space. Once a high-speed li...

  • Page 28: Section 4

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual section 4 introduction to switch management management options web-based management interface snmp-based management managing user accounts command line console interface through the serial port connecting the console port (...

  • Page 29

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual to connect a terminal to the console port: 1. Connect the female connector of the rs-232 cable directly to the console port on the switch, and tighten the captive retaining screws. 2. Connect the other end of the cable to a...

  • Page 30

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual figure 4- 1. Initial screen after first connection. First time connecting to the switch the switch supports user-based security that can allow you to prevent unauthorized users from accessing the switch or changing its sett...

  • Page 31

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual figure 4- 2. Initial screen, first time connecting to the switch press enter in both the username and password fields. You will be given access to the command prompt des-3018:4# , as shown below: there is no initial usernam...

  • Page 32: Password Protection

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual password protection the des-3018 switch does not have a default user name and password. One of the first tasks when settings up the switch is to create user accounts. If you log in using a predefined administrator-level use...

  • Page 33

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual the des-3018 switch supports snmp versions 1, 2c, and 3. You can specify which version of snmp you want to use to monitor and control the switch. The three versions of snmp vary in the level of security provided between the...

  • Page 34: Ip Address Assignment

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual ip address assignment each switch must be assigned its own ip address, which is used for communication with an snmp network manager or other tcp/ip application (for example bootp, tftp). The switch's default ip address is 1...

  • Page 35

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual figure 4- 5. Assigning the switch an ip address in the above example, the switch was assigned an ip address of 10.53.13.33 with a subnet mask of 255.0.0.0. The system message success indicates that the command was executed ...

  • Page 36: Section 5

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual section 5 introduction to web-based switch configuration introduction logging on to the web manager web-based user interface basic setup reboot basic switch setup network management switch utilities network monitoring igmp ...

  • Page 37: Web-Based User Interface

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual figure 5- 2. Enter network password window leave both the user name field and the password field blank and click ok. This will open the web-based user interface. The switch management features available in the web-based man...

  • Page 38

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual area 2 area 1 area 3 figure 5- 3. Main web-manager screen area function area 1 select the menu or window to be displayed. The folder icons can be opened to display the hyperlinked menu buttons and subfolders contained withi...

  • Page 39: Web Pages

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual web pages when you connect to the management mode of the switch with a web browser, a login screen is displayed. Enter a user name and password to access the switch's management mode. Below is a list and description of the ...

  • Page 40: Section 6

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual section 6 administration device information ip address port configuration user accounts port mirroring system log settings sntp settings tftp services ping test snmp manager single ip setting forwarding and filtering smtp s...

  • Page 41: Device

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual device information the device information window shows the switch's mac address (assigned by the factory and unchangeable), the boot prom , firmware version , and hardware version . This information is helpful to keep track...

  • Page 42: Ip Address

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual ip address the ip address may initially be set using the console interface prior to connecting to it through the ethernet. If the switch ip address has not yet been changed, read the introduction of the command line interfa...

  • Page 43

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual manual allows the entry of an ip address, subnet mask, and a default gateway for the switch. These fields should be of the form xxx.Xxx.Xxx.Xxx , where each xxx is a number (represented in decimal form) between 0 and 255. T...

  • Page 44: Port Configurations

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual port configurations this section contains information for configuring various attributes and properties for individual physical ports, including port speed. Clicking on port configurations in the administration menu will di...

  • Page 45

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual parameter description state toggle the state field to either enable or disable a given port or group of ports. Speed/duplex toggle the speed/duplex field to either select the speed and duplex/half-duplex state of the port. ...

  • Page 46: Port Description

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual port description the switch supports a port description feature where the user may name various ports on the switch. To assign names to various ports, click the port description on the administration menu: figure 6- 4. Port...

  • Page 47: Port Err-Disabled

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual port err-disabled the following window is used to view information about ports that have had their connection status disabled, because of a stp loopback detection. To view the following window, open the administration folde...

  • Page 48: User Accounts

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual user accounts use the user accounts management window to control user privileges. To view existing user accounts, open the security management folder and click on the user accounts link. This will open the user accounts pag...

  • Page 49

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual admin and user privileges there are two levels of user privileges, admin and user . Some menu selections available to users with admin privileges may not be available to those with user privileges. The following table summa...

  • Page 50: Port Mirroring

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual port mirroring the switch allows you to copy frames transmitted and received on a port and redirect the copies to another port. You can attach a monitoring device to the mirrored port, such as a sniffer or an rmon probe, to...

  • Page 51: System Log Settings

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual system log settings the switch can send syslog messages to up to four designated servers using the current system log host window. In the administration folder, click system log settings , to view the screen shown below. Fi...

  • Page 52

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual 3 system daemons 4 security/authorization messages 5 messages generated internally by syslog line printer subsystem 7 network news subsystem 8 uucp subsystem 9 clock daemon 10 security/authorization messages 11 ftp daemon 1...

  • Page 53: Sntp Settings

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual sntp settings time setting to configure the time settings for the switch, open the administration folder, then the sntp settings folder and click on the time setting link, revealing the following screen for the user to conf...

  • Page 54

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual time zone and dst the following are screens used to configure time zones and daylight savings time settings for sntp. Open the administration folder, then the sntp folder and click on the time zone and dst link, revealing t...

  • Page 55

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual from: month enter the month dst will start on. From: time in hh:mm enter the time of day that dst will start on. To: which day enter the week of the month the dst will end. To: day of week enter the day of the week that dst...

  • Page 56: Mac Notification Settings

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual mac notification settings mac notification is used to monitor mac addresses learned and entered into the forwarding database. To globally set mac notification on the switch, open the following window by opening the mac noti...

  • Page 57: Global Settings

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual global settings the following parameters may be viewed and modified: parameter description state enable or disable mac notification globally on the switch interval (sec) the time in seconds between notifications. History si...

  • Page 58: Tftp Services

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual tftp services trivial file transfer protocol (tftp) services allow the switch’s firmware to be upgraded by transferring a new firmware file from a tftp server to the switch or vice versa. Use the pull-down menu to select th...

  • Page 59: Snmp Manager

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual snmp manager snmp settings simple network management protocol (snmp) is an osi layer 7 (application layer) designed specifically for managing and monitoring network devices. Snmp enables network management stations to read ...

  • Page 60: Snmp User Table

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual snmp user table the snmp user table displays all of the snmp user's currently configured on the switch. In the snmp manager folder, located in the administration folder, click on the snmp user table link. This will open the...

  • Page 61: Snmp View Table

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual 56) standard. To return to the snmp user table , click the show all snmp user table entries link. To add a new entry to the s nmp user table configuration , click on the add button on the snmp user table page. This will ope...

  • Page 62

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual figure 6- 20. Snmp view table to delete an existing snmp view table entry, click the in the delete column corresponding to the entry to delete. To create a new entry, click the add button and a separate menu will appear. Fi...

  • Page 63: Snmp Group Table

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual snmp group table an snmp group created with this table maps snmp users (identified in the snmp user table ) to the views created in the previous menu. To view the snmp group table , open the snmp manager folder, located in ...

  • Page 64

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual figure 6- 24. Snmp group table configuration – add window the following parameters can set: parameter description group name type an alphanumeric string of up to 32 characters. This is used to identify the new snmp group of...

  • Page 65: Snmp Community Table

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual snmp community table use this table to create an snmp community string to define the relationship between the snmp manager and an agent. The community string acts like a password to permit access to the agent on the switch....

  • Page 66: Snmp Host Table

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual snmp host table use the snmp host table to set up snmp trap recipients. Open the snmp manager folder, located in the administration folder, and click on the snmp host table link. This will open the snmp host table page, as ...

  • Page 67: Snmp Engine Id

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual snmp engine id the engine id is a unique identifier used for snmp v3 implementations. This is an alphanumeric string used to identify the snmp engine on the switch. To display the switch's snmp engine id, open the snmp mang...

  • Page 68: Ip-Mac Binding

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual ip-mac binding the ip network layer uses a four-byte address. The ethernet link layer uses a six-byte mac address. Binding these two address types together allows the transmission of data between the layers. The primary pur...

  • Page 69: Ip-Mac Binding Table

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual ip-mac binding table the window shown below can be used to create ip-mac binding entries. Click the ip-mac binding table on the ip- mac binding folder to view the ip-mac binding setting window. Enter the ip and mac addresse...

  • Page 70: Ip-Mac Binding Blocked

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual ip-mac binding blocked to view unauthorized devices that have been blocked by ip-mac binding restrictions open the ip-mac binding blocked window show below. Click ip-mac binding blocked in the ip-mac binding folder to open ...

  • Page 71: D-Link Single Ip Management

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual d-link single ip management single ip management (sim) overview simply put, d-link single ip management is a concept that will stack switches together over ethernet instead of using stacking ports or modules. There are some...

  • Page 72: Sim Using The Web Interface

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual with sim enabled, the applications in the cs will redirect the packet instead of executing the packets. The applications will decode the packet from the administrator, modify some data, then send it to the ms. After executi...

  • Page 73: Topology

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual holdtime this parameter may be set for the time, in seconds the switch will hold information sent to it from other switches, utilizing the discovery interval . The user may set the hold time from 100 to 255 seconds. Click a...

  • Page 74

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual speed displays the connection speed between the cs and the ms or cas. Remote port displays the number of the physical port on the ms or cas that the cs is connected to. The cs will have no entry in this field. Mac address d...

  • Page 75: Tool Tips

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual layer 2 member switch. Layer 3 member switch member switch of other group layer 2 candidate switch layer 3 candidate switch unknown device non-sim devices tool tips in the topology view window, the mouse plays an important ...

  • Page 76: Right Click

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual figure 6- 37. Port speed utilizing the tool tip right click right clicking on a device will allow the user to perform various functions, depending on the role of the switch in the sim group and the icon associated with it. ...

  • Page 77

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual figure 6- 39. Property window commander switch icon figure 6- 40. Right clicking a commander icon the following options may appear for the user to configure: collapse - to collapse the group that will be represented by a si...

  • Page 78

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual member switch icon figure 6- 42. Right clicking a member icon the following options may appear for the user to configure: collapse - to collapse the group that will be represented by a single icon. • • • • • expand - to exp...

  • Page 79

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual add to group - add a candidate to a group. Clicking this option will reveal the following screen for the user to enter a password for authentication from the candidate switch before being added to the sim group. Click ok to...

  • Page 80: Menu Bar

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual menu bar the single ip management window contains a menu bar for device configurations, as seen below. Figure 6- 47. Menu bar of the topology view the five menus on the menu bar are as follows. File print setup - will view ...

  • Page 81: Firmware Upgrade

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual note: upon this firmware release, some functions of the sim can only be configured through the command line interface. See the des-30xx cli manual for more information on sim and its configurations. Firmware upgrade this sc...

  • Page 82: Forwarding & Filtering

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual forwarding & filtering unicast forwarding open the forwarding & filtering folder in the administration menu and click on the unicast forwarding link. This will open the setup static unicast forwarding table , as shown below...

  • Page 83: Multicast Forwarding

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual multicast forwarding the following figure and table describe how to set up multicast forwarding on the switch. Open the forwarding & filtering folder in the administration menu, and click on the multicast forwarding link to...

  • Page 84: Multicast Filtering

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual multicast filtering use the multicast filtering mode setting menu to select one of two filtering options for multicsast packets: • forward unregistered groups – this default setting will forward all multicast streams. • fil...

  • Page 85: Smtp Service

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual smtp service smtp or simple mail transfer protocol is a function of the switch that will send switch events to mail recipients based on e-mail addresses entered using the commands below. The switch is to be configured as a ...

  • Page 86: Smtp Server Settings

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual if the switch shuts down or reboots, mail messages in the waiting queue will be lost. Smtp server settings the following window is used to configure the fields to set up the smtp server for the switch, along with setting e-...

  • Page 87: Smtp Service

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual mail receiver address enter a list of e-mail addresses so recipients can receive e-mail messages regarding switch functions. Up to 8 e-mail addresses can be added per switch. Do delete these addresses from the switch, click...

  • Page 88: Section 7

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual section 7 l2 features vlans trunking igmp snooping spanning tree vlans vlan description a virtual local area network (vlan) is a network topology configured according to a logical scheme rather than the physical layout. Vla...

  • Page 89

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual vlans can also provide a level of security to your network. Ieee 802.1q vlans will only deliver packets between stations that are members of the vlan. Any port can be configured as either tagging or untagging. The untagging...

  • Page 90

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual figure 7- 2. Ieee 802.1q tag the ethertype and vlan id are inserted after the mac source address, but before the original ethertype/length or logical link control. Because the packet is now a bit longer than it was original...

  • Page 91

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual if the packet is tagged with vlan information, the ingress port will first determine if the ingress port itself is a member of the tagged vlan. If it is not, the packet will be dropped. If the ingress port is a member of th...

  • Page 92: Static Vlan Entry

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual static vlan entry in the l2 features folder, open the vlan folder and click the static vlan entry link to open the following window: figure 7- 4. 802.1q static vlans window the 802.1q static vlans menu lists all previously ...

  • Page 93

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual figure 7- 6. 802.1q static vlans - modify the following fields can then be set in either the add or modify 802.1q static vlans menus: parameter description vid (vlan id) allows the entry of a vlan id in the add dialog box, ...

  • Page 94: Link Aggregation

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual link aggregation understanding port trunk groups port trunk groups are used to combine a number of ports together to make a single high-bandwidth data pipeline. The switch supports up to three port trunk groups with 2 to 8 ...

  • Page 95

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual the spanning tree protocol will treat a link aggregation group as a single link, on the switch level. On the port level, the stp will use the port parameters of the master port in the calculation of port cost and in determi...

  • Page 96: Igmp Snooping

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual igmp snooping internet group management protocol (igmp) snooping allows the switch to recognize igmp queries and reports sent between network stations or devices and an igmp host. When enabled for igmp snooping, the switch ...

  • Page 97

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual parameter description vlan id this is the vlan id that, along with the vlan name , identifies the vlan for which to modify the igmp snooping settings . Vlan name this is the vlan name that, along with the vlan id , identifi...

  • Page 98: Static Router Ports Settings

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual static router ports settings a static router port is a port that has a multicast router attached to it. Generally, this router would have a connection to a wan or to the internet. Establishing a router port will allow multi...

  • Page 99: Spanning Tree

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual spanning tree this switch supports two versions of the spanning tree protocol; 802.1d stp and 802.1w rapid stp. 802.1d stp will be familiar to most networking professionals. However, since 802.1w rstp has been recently intr...

  • Page 100

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual p2p port a p2p port is also capable of rapid transition. P2p ports may be used to connect to other bridges. Under rstp, all ports operating in full-duplex mode are considered to be p2p ports, unless manually overridden thro...

  • Page 101: Stp Bridge Global Settings

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual stp bridge global settings to open the following window, open the spanning tree folder in the l2 features menu and click the stp bridge global settings link. Figure 7- 14. Stp bridge global settings note: the hello time can...

  • Page 102

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual the following parameters can be set: parameter description spanning tree protocol use the pull-down menu to enable or disable stp globally on the switch. The default is disabled . Bridge max age: (6 - 40 sec) the max age ma...

  • Page 103: Stp Port Settings

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual stp port settings stp can be set up on a port per port basis. To view the following window click l2 features > spanning tree > stp port settings : figure 7- 15. Stp port settings and table window in addition to setting span...

  • Page 104

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual the following fields can be set: parameter description from/to a consecutive group of ports may be configured starting with the selected port. Cost ( 0 = auto) external cost - this defines a metric that indicates the relati...

  • Page 105: Section 8

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual section 8 cos bandwidth control 802.1p default priority 802.1p user priority cos scheduling mechanism cos output scheduling cos the switch supports 802.1p and other priority protocols. The following section discusses the im...

  • Page 106: The Advantages of Cos

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual the advantages of cos cos is an implementation of the ieee 802.1p standard that allows network administrators a method of reserving bandwidth for important functions that require a large bandwidth or have a high priority, s...

  • Page 107: Understanding Cos

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual understanding cos the des-3026 switch supports 802.1p priority queuing. The switch has 4 priority classes of service. These priority classes of service are numbered from 3 (class 3) — the highest priority class of service —...

  • Page 108: Bandwidth Control

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual bandwidth control the bandwidth control settings are used to place a ceiling on the transmitting and receiving data rates for any selected port. In the l2 features folder, click cos > bandwidth control , to view the screen ...

  • Page 109: 802.1P Default Priority

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual 802.1p default priority the switch allows the assignment of a default 802.1p priority to each port on the switch. In the cos folder, click 802.1p default priority , to view the screen shown below. Figure 8- 3. 802.1p defaul...

  • Page 110: 802.1P User Priority

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual 802.1p user priority the switch allows the assignment of a class of service to each of the 802.1p priorities. In the cos folder, click 802.1p user priority to view the screen shown below. Figure 8- 4. 802.1p user priority w...

  • Page 111: Cos Output Scheduling

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual cos output scheduling cos can be customized by changing the output scheduling used for the hardware classes of service in the switch. As with any changes to cos implementation, careful consideration should be given to how n...

  • Page 112: Priority Setting

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual priority setting figure 8- 7. Priority setting configure the following priority setting parameters: parameter description from/to a consecutive group of ports may be configured starting with the selected port. Main select s...

  • Page 113

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual figure 8- 8. Tos priority setting select the tos value from the pull-down menu and the class id of the priority level mapped to and click the apply button. The new mapping is displayed in the port priority table below. 100

  • Page 114: Dscp Priority Setting

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual dscp priority setting use the dscp priority setting menu to configure dscp priority mapping for class of service on the switch. Figure 8- 9. Dscp priority setting type the dscp bit level and the class id priority from the p...

  • Page 115: Port Mapping Priority Cos

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual port mapping priority cos port mapping priority cos can only be used if it has been previously configured for the selected ports in the priority setting menu. There are two class of service levels available. Figure 8- 10. P...

  • Page 116: Section 9

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual section 9 cpu interface filtering due to needed extra switch security, the des-3018 switch incorporates cpu interface filtering. This added feature increases the running security of the switch by enabling the user to create...

  • Page 117

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual figure 9- 3. Cpu interface filtering configuration window – ethernet parameter description profile id (1-3) type in a unique identifier number for this profile set. This value can be set from 1 - 3. Type select profile base...

  • Page 118

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual the page shown below is the cpu ip access profile configuration page. Figure 9- 4. Cpu interface filtering configuration window- ip parameter description profile id (1-3) type in a unique identifier number for this profile ...

  • Page 119

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual packet header and use this as the, or part of the criterion for forwarding. Protocol selecting this option instructs the switch to examine the protocol type value in each frame's header. You must then specify what protocol(...

  • Page 120

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual the page shown below is the packet content mask configuration window. Figure 9- 5. Cpu interface filtering configuration window- packet content this screen will aid the user in configuring the switch to mask packet headers ...

  • Page 121

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual to establish the rule for a previously created cpu access profile: in the cpu interface folder, click the cpu interface filtering state link to open the cpu interface filtering table . Figure 9- 6. Cpu interface filtering t...

  • Page 122

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual parameters description profile id this is the identifier number for this profile set. Mode select permit to specify that the packets that match the access profile are forwarded by the switch, according to any additional rul...

  • Page 123

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual figure 9- 9. Cpu interface filtering rule display – ethernet the following window is the cpu interface filtering rule table for ip. Figure 9- 10. Cpu interface filtering rule table – ip to create a new rule set for an acces...

  • Page 124

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual parameter description profile id this is the identifier number for this profile set. Mode select permit to specify that the packets that match the access profile are forwarded by the switch, according to any additional rule...

  • Page 125

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual figure 9- 13. Cpu interface filtering rule table – packet content to remove a previously created rule, select it and click the button. To add a new access rule, click the add button: figure 9- 14. Cpu interface filtering ru...

  • Page 126

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual • • ip instructs the switch to examine the ip address in each frame's header. Packet content mask instructs the switch to examine the packet header. Offset this field will instruct the switch to mask the packet header begin...

  • Page 127: Section 10

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual section 10 security traffic control port security port lock entries 802.1x trusted host traffic segmentation the following section will aid the user in configuring security functions for the switch. The switch includes vari...

  • Page 128

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual to configure traffic control , first select a group of ports by using the group pull down menu. Finally, enable or disable the broadcast storm , multicast storm and destination unknown using their corresponding pull-down me...

  • Page 129: Port Security

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual port security a given ports’ (or a range of ports') dynamic mac address learning can be locked such that the current source mac addresses entered into the mac address forwarding table can not be changed once the port lock i...

  • Page 130: Port Lock Entries

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual port lock entries the port lock entry delete window is used to remove an entry from the port security entries learned by the switch and entered into the forwarding database. To view the following window, click security > po...

  • Page 131: 802.1X

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual 802.1x 802.1x port-based and mac-based access control the ieee 802.1x standard is a security measure for authorizing and authenticating users to gain access to various wired or wireless devices on a specified local area net...

  • Page 132

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual authentication server the authentication server is a remote device that is connected to the same network as the client and authenticator, must be running a radius server program and must be configured properly on the authen...

  • Page 133

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual figure 10- 7. The authenticator client the client is simply the endstation that wishes to gain access to the lan or switch services. All endstations must be running software that is compliant with the 802.1x protocol. For u...

  • Page 134

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual authentication process utilizing the three roles stated above, the 802.1x protocol provides a stable and secure way of authorizing and authenticating users attempting to access the network. Only eapol traffic is allowed to ...

  • Page 135: Access Control

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual understanding 802.1x port-based and mac-based network access control the original intent behind the development of 802.1x was to leverage the characteristics of point-to-point in lans. As any single lan segment in such infr...

  • Page 136

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual mac-based network access control 802.1x client network access controlled port network access uncontrolled port radius server ethernet switch 802.1x client 802.1x client 802.1x client 802.1x client 802.1x client 802.1x clien...

  • Page 137

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual 802.1x authenticator settings to configure the 802.1x authenticator settings, click security > 802.1x > 802.1x authenticator settings. Figure 10- 12. 802.1x authenticator settings window to configure the settings by port, c...

  • Page 138

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual parameter description from [ ] to [ ] enter the port or ports to be set. Admctrldir sets the administrative-controlled direction to either in or both . If in is selected, control is only exerted over incoming traffic throug...

  • Page 139

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual local users to configure local users for 802.1x, click security > 802.1x > local users. This window will allow the user to set different 802.1x local users on the switch. Figure 10- 14. 802.1x local user table configuration...

  • Page 140

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual configure the following 802.1x capability settings: parameter description from and to ports being configured for 802.1x settings. Capability two role choices can be selected: authenticator - a user must pass the authenticat...

  • Page 141

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual backend state the backend authentication state will display one of the following: request, response, success, fail, timeout, idle or initialize. Open dir the operational controlled directions are both and in . Port status t...

  • Page 142

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual reauthenticate port(s) for port based 802.1x this window allows you to reauthenticate a port or group of ports by choosing a port or group of ports by using the pull down menus from and to and clicking apply . The reauthent...

  • Page 143

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual reauthenticate port(s) for mac-based 802.1x to reauthenticate ports for the mac side of 802.1x, the user must first enable 802.1x by mac address in the advanced settings window. Click security > 802.1x > reauthenticate port...

  • Page 144

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual parameter description succession choose the desired radius server to configure: first, second or third . Radius server set the radius server ip. Authentic port set the radius authentic server(s) udp port. The default port i...

  • Page 145: Trusted Host

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual trusted host go to the security folder and click on the trusted host link; the following screen will appear. Figure 10- 21. Security ip management menu use the security ip management to permit remote stations to manage the ...

  • Page 146

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual figure 10- 22. Current traffic segmentation table click on the setup button to open the setup forwarding ports page, as shown below. Figure 10- 23. Setup forwarding ports window this page allows you to determine which port ...

  • Page 147

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual clicking the apply button will enter the combination of transmitting port and allowed receiving ports into the switch's traffic segmentation table . 134.

  • Page 148: Section 11

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual section 11 monitoring cpu utilization port utilization packets packet errors packet size mac address switch log log settings igmp snooping group browse router port browse arp table session table port access control cpu util...

  • Page 149: Port Utilization

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual the information is described as follows: parameter description time interval [1s ] select the desired setting between 1s and 60s, where "s" stands for seconds. The default value is one second. Record number [200] select num...

  • Page 150: Packets

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual packets the web manager allows various packet statistics to be viewed as either a line graph or a table. Six windows are offered. Received (rx) click the received (rx) link in the packets folder of the monitoring menu to vi...

  • Page 151

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual figure 11- 4. Rx packets analysis table the following fields may be set or viewed: parameter description time interval [1s ] select the desired setting between 1s and 60s, where "s" stands for seconds. The default value is ...

  • Page 152: Umb Cast (Rx)

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual umb cast (rx) click the umb cast (rx) link in the packets folder of the monitoring menu to view the following graph of umb cast packets received on the switch. To select a port to view these statistics for, use the port pul...

  • Page 153

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual figure 11- 6. Rx packets analysis window (table for unicast, multicast, and broadcast packets) the following fields may be set or viewed: parameter description time interval [1s] select the desired setting between 1s and 60...

  • Page 154: Transmitted (Tx)

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual transmitted (tx) click the transmitted (tx) link in the packets folder of the monitoring menu to view the following graph of packets transmitted from the switch. To select a port to view these statistics for, use the port p...

  • Page 155

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual figure 11- 8. Tx packets analysis window (table for bytes and packets) the following fields may be set or viewed: parameter description time interval [1s] select the desired setting between 1s and 60s, where "s" stands for ...

  • Page 156: Errors

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual errors the web manager allows port error statistics compiled by the switch's management agent to be viewed as either a line graph or a table. Four windows are offered. Received (rx) click the received (rx) link in the error...

  • Page 157

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual figure 11- 10. Rx error analysis window (table) the following fields can be set: parameter description time interval [1s] select the desired setting between 1s and 60s, where "s" stands for seconds. The default value is one...

  • Page 158: Transmitted (Tx)

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual transmitted (tx) click the transmitted (tx) link in the error folder of the monitoring menu to view the following graph of error packets received on the switch. To select a port to view these statistics for, select the port...

  • Page 159

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual the following fields may be set or viewed: parameter description time interval [1s ] select the desired setting between 1s and 60s, where "s" stands for seconds. The default value is one second. Record number [200] select n...

  • Page 160: Packet Size

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual packet size the web manager allows packets received by the switch, arranged in six groups and classed by size, to be viewed as either a line graph or a table. Two windows are offered. To select a port to view these statisti...

  • Page 161: Mac Address

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual the following fields can be set or viewed: parameter description time interval [1s] select the desired setting between 1s and 60s, where "s" stands for seconds. The default value is one second. Record number [200] select nu...

  • Page 162

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual figure 11- 15. Mac address table the following fields can be viewed or set: parameter description vlan name enter a vlan name by which to browse the forwarding table. Mac address enter a mac address by which to browse the f...

  • Page 163: Switch History Log

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual switch history log the web manager allows the switch's history log, as compiled by the switch's management agent, to be viewed. To view the switch history log, open the monitoring folder and click the switch history log lin...

  • Page 164: Log Settings

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual log settings use the log settings menu to define the schedule or terms used for saving the switch log. Figure 11- 17. Log settings menu select the desired log mode and click the apply button to put into effect. Parameter de...

  • Page 165: Igmp Snooping Group

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual igmp snooping group this window allows the switch’s igmp snooping group table to be viewed. Igmp snooping allows the switch to read the multicast group ip address and the corresponding mac address from igmp packets that pas...

  • Page 166: Browse Router Port

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual browse router port this displays which of the switch’s ports are currently configured as router ports. A router port configured by a user (using the console or web-based management interfaces) is displayed as a static route...

  • Page 167: Port Access Control

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual port access control the following screens are used to monitor 802.1x statistics of the switch, on a per port basis. To view the port access control screens, open the monitoring folder and click the port access control folde...

  • Page 168

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual roundtriptime the time interval (in hundredths of a second) between the most recent access- reply/access-challenge and the access-request that matched it from this radius authentication server. Accessretrans the number of r...

  • Page 169: Radius Accounting

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual radius accounting this window shows managed objects used for managing radius accounting clients, and the current statistics associated with them. It has one row for each radius authentication server that the client shares a...

  • Page 170: Authenticator Diagnostics

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual authenticator diagnostics this table contains the diagnostic information regarding the operation of the authenticator associated with each port. An entry appears in this table for each port that supports the authenticator f...

  • Page 171

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual being received from the supplicant. Eaplogoffauthenticating counts the number of times that the state machine transitions from authenticating to aborting, as a result of an eapol-logoff message being received from the suppl...

  • Page 172

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual authenticator session statistics this table contains the session statistics objects for the authenticator pae associated with each port. An entry appears in this table for each port that supports the authenticator function....

  • Page 173: Authenticator Statistics

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual octets rx the number of octets received in user data frames on this port during the session. Octets tx the number of octets transmitted in user data frames on this port during the session. Id a unique identifier for the ses...

  • Page 174

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual frames tx the number of eapol frames that have been transmitted by this authenticator. Rx start the number of eapol start frames that have been received by this authenticator. Txreqid the number of eap req/id frames that ha...

  • Page 175: Authenticator State

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual authenticator state the following section describes the 802.1x status on the switch. To view the authenticator state, click monitoring > port access control > authenticator state. Figure 11- 27. Authenticator state window –...

  • Page 176

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual figure 11- 28. Authenticator state window – mac-based 802.1x this window displays the authenticator state for individual ports on a selected device. A polling interval between 1 and 60 seconds can be set using the drop-down...

  • Page 177: Reset

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual reset the reset function has several options when resetting the switch. Some of the current configuration parameters can be retained while resetting all other configuration parameters to their factory defaults. Note: only t...

  • Page 178: Reboot System

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual reboot system the following menu is used to restart the switch. Figure 11- 30. Reboot system window clicking the yes click-box will instruct the switch to save the current configuration to non-volatile ram before restarting...

  • Page 179: Appendix A

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual appendix a physical and environmental ac input & external redundant power supply 100 – 120; 200 - 240 vac, 50/60 hz (internal universal power supply) power consumption des-3010f – 10.7w des-3010g – 9.9w des-3018 – 10.5w des...

  • Page 180

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual general standards: ieee 802.3 10base-t ethernet ieee 802.3u 100base-tx fast ethernet ieee 802.3z 1000base-sx gigabit ethernet ieee 802.3ab 1000base-t gigabit ethernet ieee 802.1 d/w spanning tree ieee 802.1 p/q vlan ieee 80...

  • Page 181

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual performance transmission method store-and-forward ram buffer 32m bytes per device filtering address table: 8k mac address per device packet filtering / forwarding rate: 14,880 pps per 10mbps 148,809 pps per 100mbps 1,488,10...

  • Page 182: Appendix B

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual appendix b cables and connectors when connecting the switch to another switch, a bridge or hub, a normal cable is necessary. Please review these products for matching cable pin assignment. The following diagrams and tables ...

  • Page 183: Appendix C

    Des-3010f/des-3010fl/des-3010g/des-3018/des-3026 fast ethernet switch manual appendix c cable lengths use the following table to as a guide for the maximum cable lengths. Standard media type maximum distance mini-gbic 1000base-lx, single-mode fiber module 1000base-sx, multi-mode fiber module 1000bas...

  • Page 184: Glossary

    Glossary 1000base-sx: a short laser wavelength on multimode fiber optic cable for a maximum length of 550 meters 1000base-lx: a long wavelength for a "long haul" fiber optic cable for a maximum length of 10 kilometers 100base-fx : 100mbps ethernet implementation over fiber. 100base-tx: 100mbps ether...

  • Page 185

    Latency: the delay between the time a device receives a packet and the time the packet is forwarded out of the destination port. Line speed : see baud rate. Main port: the port in a resilient link that carries data traffic in normal operating conditions. Mdi - medium dependent interface: an ethernet...

  • Page 186: Warranties and Registration

    Warranties and registration limited warranty d-link provides this limited warranty for its product only to the person or entity who originally purchased the product from d-link or its authorized reseller or distributor. D-link would fulfill the warranty obligation according to the local warranty pol...

  • Page 187

    Period to an authorized d-link service office. The claim must include a written description of the hardware defect or software nonconformance in sufficient detail to allow d-link to confirm the same. The original product owner must obtain a return material authorization (rma) number from the authori...

  • Page 188: Fcc Warning

    Copyright 2005 d-link corporation. Contents subject to change without prior notice. D-link is a registered trademark of d- link corporation/d-link systems, inc. All other trademarks belong to their respective proprietors. Copyright statement no part of this publication may be reproduced in any form ...

  • Page 189

    Subject to the terms and conditions set forth herein, d-link systems, inc. (“d-link”) provides this limited warranty: • only to the person or entity that originally purchased the product from d-link or its authorized reseller or distributor, and • only for products purchased and delivered within the...

  • Page 190

    D-link may reject or return any product that is not packaged and shipped in strict compliance with the foregoing requirements, or for which an rma number is not visible from the outside of the package. The product owner agrees to pay d-link’s reasonable handling and return shipping charges for any p...

  • Page 191

    Product registration register your d-link product online at http://support.Dlink.Com/register product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. 178.

  • Page 192

    D-link europe limited product warranty general terms the limited product warranty set forth below is given by d-link (europe) ltd. (herein referred to as "d-link"). This limited product warranty is only effective upon presentation of the proof of purchase. Upon further request by d-link, this warran...

  • Page 193

    D-link europe limited produktgarantie allgemeine bedingungen die hierin beschriebene eingeschränkte garantie wird durch d-link (europe) ltd. Gewährt (im folgenden: „d-link“). Diese eingeschränkte garantie setzt voraus, dass der kauf des produkts nachgewiesen wird. Auf verlangen von d-link muss auch ...

  • Page 194

    D-link europe a limité la garantie des produits conditions générales la garantie produit limitée énoncée ci-dessous émane de d-link (europe) ltd. (ci-après « d-link »). Cette garantie produit limitée n’est valable que sur présentation de la preuve d’achat. D-link peut également exiger la présentatio...

  • Page 195

    Garantía limitada del producto d-link europa condiciones generales esta garantía la ofrece d-link (europe) ltd. (en este documento, "d-link"). La garantía limitada del producto sólo es válida si se acompaña del comprobante de la compra. También deberá presentarse la tarjeta de garantía si d-link lo ...

  • Page 196

    D-link europe termini di garanzia dei prodotti generalità la presente garanzia viene fornita da d-link (europe) ltd. (di seguito denominata "d-link"). Essa viene riconosciuta solo se accompagnata dalla prova di acquisto. D-link può richiedere anche l’esibizione della presente cartolina di garanzia. ...

  • Page 197: Technical Support

    Technical support you can find software updates and user documentation on the d-link website. Tech support for customers within australia: d-link technical support over the telephone: 1300-766-868 monday to friday 8:00am to 8:00pm est saturday 9:00am to 1:00pm est d-link technical support over the i...

  • Page 198: Technical Support

    Technical support you can find software updates and user documentation on the d-link website. Tech support for customers within south eastern asia and korea: d-link south eastern asia and korea technical support over the telephone: +65-6895-5355 monday to friday 9:00am to 12:30pm, 2:00pm-6:00pm sing...

  • Page 199: Technical Support

    Technical support you can find software updates and user documentation on the d-link website. Tech support for customers within india d-link technical support over the telephone: +91-22-26526741 +91-22-26526696 –ext 161 to 167 monday to friday 9:30am to 7:00pm d-link technical support over the inter...

  • Page 200: Technical Support

    Technical support you can find software updates and user documentation on the d-link website. D-link provides free technical support for customers for the duration of the warranty period on this product. Customers can contact d-link technical support through our web site or by phone. Tech support fo...

  • Page 201: Technical Support

    Technical support you can find software updates and user documentation on the d-link website. Tech support for customers within the u.A.E & north africa: d-link technical support over the telephone: (971) 4-391-6480 (u.A.E) sunday to wednesday 9:00am to 6:00pm gmt+4 thursday 9:00am to 1:00pm gmt+4 d...

  • Page 202: Technical Support

    Technical support you can find software updates and user documentation on the d-link website. Tech support for customers within south africa and sub sahara region: d-link south africa and sub sahara technical support over the telephone: +27-12-665-2165 08600 dlink ( for south africa only ) monday to...

  • Page 203: Technical Support

    Technical support you can find updates and user documentation on the d-link website tech support for latin america customers: d-link technical support over the followings telephones: argentina: 0800-666 1442 monday to friday 09:00am to 22:00pm chile: 800-214 422 monday to friday 08:00am to 21:00pm c...

  • Page 204: Техническая

    Техническая поддержка Обновления программного обеспечения и документация доступны на Интернет - сайте d-link. D-link предоставляет бесплатную поддержку для клиентов в течение гарантийного срока . Клиенты могут обратиться в группу технической поддержки d-link по телефону или через Интернет . Техничес...

  • Page 205: Asistencia Técnica

    Asistencia técnica d-link latin américa pone a disposición de sus clientes, especificaciones, documentación y software mas reciente a través de nuestro sitio web www.Dlinklatinamerica.Com el servicio de soporte técnico tiene presencia en numerosos países de la región latino américa, y presta asisten...

  • Page 206: Suporte Técnico

    Suporte técnico voc ê pode encontrar atualiza çõ es de software e documenta çã o de usu á rio no site da d-link brasil www.Dlinkbrasil.Com.Br. A d-link fornece suporte t é cnico gratuito para clientes no brasil durante o per í odo de vig ê ncia da garantia deste produto. Suporte t é cnico para clien...

  • Page 207

    友冠技術支援 台灣地區用戶可以透過我們的網站，電子郵件或電話與友 冠資訊技術支援人員聯絡。 支援服務時間從 週一到週五，上午8:30 a.M. 到 7:00 p.M web: http://www.Dlinktw.Com.Tw/ faq: http://www.Dlinktw.Com.Tw/support.Asp email: dssqa_service@dlinktw.Com.Tw phone: 0800-002-615 如果您是台灣地區以外的用戶，請參考使用手冊 中記載的d-link 全球各地分公司的聯絡資訊 取得支援服務。 產品維修與保固相關資訊，請參考友冠資訊網頁說明： http://...

  • Page 208: Technical Support

    Technical support you can find software updates and user documentation on the d- link website. D-link provides free technical support for customers within the united states and within canada for the duration of the warranty period on this product. U.S. And canadian customers can contact d-link techn...

  • Page 209: Technical Support

    Technical support you can find software updates and user documentation on the d-link websites. D-link provides free technical support for customers within canada, the united kingdom, and ireland. Customers can contact d-link technical support through our websites, or by phone. For customers within t...

  • Page 210: Technische Unterstützung

    Technische unterstützung aktualisierte versionen von software und benutzerhandbuch finden sie auf der website von d-link. D-link bietet kostenfreie technische unterstützung für kunden innerhalb deutschlands, Österreichs, der schweiz und osteuropas. Unsere kunden können technische unterstützung über ...

  • Page 211: Assistance Technique

    Assistance technique vous trouverez la documentation et les logiciels les plus récents sur le site web d-link. Le service technique de d-link est gratuit pour les clients aux etats-unis durant la période de garantie. Ceux-ci peuvent contacter le service technique de d-link par notre site internet ou...

  • Page 212: Asistencia Técnica

    Asistencia técnica puede encontrar el software más reciente y documentación para el usuario en el sitio web de d-link . D-link ofrece asistencia técnica gratuita para clientes dentro de españa durante el periodo de garantía del producto. Los clientes españoles pueden ponerse en contacto con la asist...

  • Page 213: Supporto Tecnico

    Supporto tecnico gli ultimi aggiornamenti e la documentazione sono disponibili sul sito d-link. Supporto tecnico per i clienti residenti in italia d-link mediterraneo s.R.L. Via n. Bonnet 6/b 20154 milano supporto tecnico dal lunedì al venerdì dalle ore 9.00 alle ore 19.00 con orario continuato tele...

  • Page 214: Technical Support

    Technical support you can find software updates and user documentation on the d-link website. D-link provides free technical support for customers within benelux for the duration of the warranty period on this product. Benelux customers can contact d-link technical support through our website, or by...

  • Page 215: Pomoc Techniczna

    Pomoc techniczna najnowsze wersje oprogramowania i dokumentacji u ż ytkownika mo ż na znale źć w serwisie internetowym firmy d-link. D-link zapewnia bezp ł atn ą pomoc techniczn ą klientom w polsce w okresie gwarancyjnym produktu. Klienci z polski mog ą si ę kontaktowa ć z dzia ł em pomocy techniczn...

  • Page 216: Technická Podpora

    Technická podpora aktualizované verze software a uživatelských p ř íru č ek najdete na webové stránce firmy d-link. D-link poskytuje svým zákazník ů m bezplatnou technickou podporu zákazníci mohou kontaktovat odd ě lení technické podpory p ř es webové stránky, mailem nebo telefonicky web: http://www...

  • Page 217: Technikai Támogatás

    Technikai támogatás meghajtó programokat és frissítéseket a d-link magyarország weblapjáról tölthet le. Telefonon technikai segítséget munkanapokon hétf ő t ő l- csütörtökig 9.00 – 16.00 óráig és pénteken 9.00 – 14.00 óráig kérhet a (1) 461-3001 telefonszámon vagy a support@dlink.Hu emailcímen. Magy...

  • Page 218: Teknisk Support

    D-link teknisk telefon support: 800 10 610 (hverdager 08:00-20:00) d-link teknisk support over internett: http://www.Dlink.No teknisk support du kan finne programvare oppdateringer og bruker dokumentasjon på d-links web sider. D-link tilbyr sine kunder gratis teknisk support under produktets garanti...

  • Page 219: Teknisk Support

    Teknisk support du finder software opdateringer og bruger- dokumentation på d-link’s hjemmeside. D-link tilbyder gratis teknisk support til kunder i danmark i hele produktets garantiperiode. Danske kunder kan kontakte d-link’s tekniske support via vores hjemmeside eller telefonisk. D-link teknisk su...

  • Page 220: Teknistä Tukea Asiakkaille

    Teknistä tukea asiakkaille suomessa: d-link tarjoaa teknistä tukea asiakkailleen. Tuotteen takuun voimassaoloajan. Tekninen tuki palvelee seuraavasti: arkisin klo. 9 - 21 numerosta 0800-114 677 internetin kautta ajurit ja lisätietoja tuotteista. Http://www.Dlink.Fi sähköpostin kautta voit myös tehdä...

  • Page 221: Teknisk Support

    Teknisk support på vår hemsida kan du hitta mer information om mjukvaru uppdateringar och annan användarinformation. D-link tillhandahåller teknisk support till kunder i sverige under hela garantitiden för denna produkt. Teknisk support för kunder i sverige: d-link teknisk support via telefon: 0770-...

  • Page 222

    209.

  • Page 223: International Offices

    International offices u.S.A 17595 mt. Herrmann street fountain valley, ca. 92708 tel: 714-885-6000 fax 866-743-4905 url: www.Dlink.Com canada 2180 winston park drive oakville, ontario, l6h 5w1 canada tel: 1-905-8295033 fax: 1-905-8295223 url: www.Dlink.Ca europe (u. K.) 4th floor, merit house edgwar...

  • Page 224

    Registration card all countries and regions excluding usa print, type or use block letters. Your name: mr./ms _____________________________________________________________________________ organization: ________________________________________________ dept. ____________________________ your title at ...

  • Page 225

    212.