D-Link DES-3526 - Switch - Stackable User Manual - Time Zone and Dst
xStack
®
DES-3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
91
Figure 6- 60. Current Time: Status window
The following parameters can be set or are displayed:
Parameter Description
Current Time: Status
Current Time
The current local date and time for the system.
Time Source
Displays the time source for the system.
Current Time: SNTP Settings
SNTP State
Use this pull-down menu to Enabled or Disabled SNTP.
SNTP Primary Server This is the IP address of the primary server the SNTP information will be taken from.
SNTP Secondary
Server
This is the IP address of the secondary server the SNTP information will be taken from.
SNTP Poll Interval in
Seconds
This is the interval, in seconds, between requests for updated SNTP information.
Current Time: Set Current Time
Year
Enter the current year, if you want to update the system clock.
Month
Enter the current month, if you would like to update the system clock.
Day
Enter the current day, if you would like to update the system clock.
Time in HH MM
Enter the current time in hours and minutes, if you would like to update the system clock.
Click Apply to implement your changes.
Time Zone and DST
The following windows are used to configure time zones and Daylight Savings time settings for SNTP. Click, Configuration >
SNTP Settings > Time Zone and DST.