D-Link DES-6300 User Manual - page 3
♦
RS-232 port for out-of-band management and system configuration
♦
Telnet Remote Configuration
♦
TFTP software upgrades, settings file and switch log uploads
♦
NMS(Net Management System)
♦
CLI (Command Line Interface)
♦
SNMP Agents:
♦
MIB-II (RFC 1213)
♦
RMON MIB (RFC 1757)
♦
Bridge MIB (RFC 1493)
♦
SLIP
♦
Supports four RMON (1,2,3,9) groups
♦
Port Security
♦
BootP support
Layer 3 support includes:
♦
Support for DHCP Client
♦
Support RIP1 and RIP2 routing protocol
♦
Support OSFP routing protocol
♦
Support IGMP, IP Multicast packet filtering, support QoS (Quality of Service).
♦
Support Multicast Routing protocol: DVMRP, PIM DM
♦
Support Layer 3 Access Control List, (ACL)
Optional Modules
DES-6303 10BASE-T/100BASE-TX Module
♦
16 10BASE-T/100BASE-TX ports
♦
Fully compliant with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX
♦
All 10/100Mbps ports support NWay auto-negotiation
♦
Back pressure Flow Control support for Half-duplex mode
♦
IEEE 802.3x-compliant Flow Control support for Full-duplex
DES-6304 100BASE-FX (MT-RJ) Module
♦
12 100BASE-FX (MT-RJ) Fast Ethernet ports
♦
Fully compliant with IEEE 802.3u 100BASE-FX
♦
IEEE 802.3x compliant Flow Control support for Full-duplex
DES-6305 100BASE-FX (SC) Module
♦
8 100BASE-FX (SC) Fast Ethernet ports
♦
Connects to a 100BASE-FX device at full duplex.
♦
Fully compliant with IEEE 802.3u 100BASE-FX
♦
Supports Full-duplex operation only
♦
IEEE 802.3x-compliant Flow Control support