D-Link DFL-1000 Quick Install Manual - Connecting to Your Network
Other manuals for DFL-1000:
User Manual, Quick Install Manual
of
6
In the event of difficulties you can restore the factory default settings with
the following command:
• set system status reset
When you are finished with the console you can log out using the com-
mand:
• quit
Connecting to Your Network
Connect the Internal Interface to an Internal Network Hub or Switch using
a straight Ethernet cable.The Link indicator will light up if the connection is
to a 100 megabit device.
Connecting to the Internet
Connect the External Interface to the Internet by running an Ethernet