2 about this guide this guide contains step-by-step instructions for setting up the d-link dfl-260e/860e firewall. Please note that the model you have purchased may appear slightly different from those shown in the illustrations unpacking the product open the shipping carton and carefully unpack its...
3 plugging in the ac powercord users may now connect the ac power cord into the rear of the firewall and to an electrical outlet (preferably one that is grounded and surge protected). Figure 3. Plugging dfl-260e / 860e into an outlet product overview front panel - dfl-260e/860e figure 4. Dfl-260e/ 8...
4 dfl-260e/860e default interface settings port interface name interface type ip address web-based mgmt 1 wan dhcp client 0.0.0.0/0 disable 2 dmz static ip 172.17.100.254/24 disable 3 all lan port static ip 192.168.10.1/24 enable table 3. Default interface assignment note: d-link netdefend firewalls...
5 using the webui to use the webui, the workstation from which you are managing the device must initially be on the same subnetwork as the device. Browser version microsoft internet explorer 6.0 or higher mozilla firefox 1.0 or higher netscape navigator 8.0 or higher table 4. Browser compatibility t...
6 to establish a console connection: 1. Plug the female end of the supplied rj-45-to-db9 cable directly to the console port on the firewall, and tighten the captive retaining screws. 2. Connect the other end of the cable to a terminal or to the serial connector of a computer running terminal emulati...
Notes.
Ver. 1.00 2010/08/27 29072600df260e0
