1. DL manuals
  2. D-Link
  3. PCI Card
  4. DGE-530T
  5. User Manual

D-Link DGE-530T User Manual - Configuration

Manual is about: 32-bit Gigabit Network Adapter

Summary of DGE-530T

  • Page 2: Table of Contents

    D-link dge-530t user manual table of contents product overview ........................................................3 package contents....................................................3 system requirements .............................................3 introduction ................................

  • Page 3: System Requirements

    3 d-link dge-530t user manual section 1 - product overview • d-link dge-530t gigabit network adapter • drivers, manual, and warranty on cd system requirements product overview package contents before installing the dge-530t, check your system for the following minimum configuration requirements. • a...

  • Page 4: Introduction

    D-link dge-530t user manual section 1 - product overview introduction the d-link dge-530t is a 10/100/1000mbps copper gigabit pci card for servers and workstations. Current systems running at 10mbps and 100mbps can be upgraded to gigabit ethernet, eliminating network bottlenecks, and increasing prod...

  • Page 5: Features

    5 d-link dge-530t user manual section 1 - product overview features designed for versatility and performance, the dge-530t network adapter provides the following: • operability in 32-bit, 33 mhz slot servers and workstations • universal bus support 3.3v • compliance with ieee 802.3ab 1000base-t giga...

  • Page 6: Hardware Overview

    D-link dge-530t user manual section 1 - product overview hardware overview leds four led indicators: link/activity, full duplex, 1000mbps, 100mbps ethernet port 10/100/100 ethernet port..

  • Page 7: Installation

    D-link dge-530t user manual section - installation installation unpack and inspect caution: under ordinary circumstances, a dge-530t card will not be affected by a static charge that may be received through your body during handling of the unit. In special circumstances, the user may carry an extrao...

  • Page 8

    D-link dge-530t user manual section - installation the driver will install. Once the installation is complete, click ok to finish..

  • Page 9

    D-link dge-530t user manual section - installation hardware installation shut down the computer, unplug its power cord, and remove the chassis cover. Important: opening the case of your computer may compromise the warranty of your computer. Consult the computer manufacturer before opening the case t...

  • Page 10

    10 d-link dge-530t user manual section - installation once you boot your computer, windows ® will automatically install the drivers. Windows ® xp users: you will receive a bubble stating that windows found the dge-530t adapter. Windows vista ™ users: you will receive a bubble stating that when windo...

  • Page 11: Verify Installation

    11 d-link dge-530t user manual section - installation to verify that the drivers are installed, you may view device manager. To view the device manager, please follow the steps below: step 1: windows 2000: click on start > settings > control panel windows ® xp: click on start > control panel windows...

  • Page 12: Verify Connectivity

    1 d-link dge-530t user manual section - installation verify connectivity after you install your new d-link adapter, by default, the tcp/ip settings should be set to obtain an ip address from a dhcp server (i.E router) automatically. To verify your ip address, please see the following steps below. Wi...

  • Page 13: Advanced Features

    13 d-link dge-530t user manual section 3 - advanced features advanced features wake on lan this wake-on-lan function can wake up the system from the sleeping mode to the fully powered mode over the network immediately and automatically. Once the system is awake, it can be directed to run management ...

  • Page 14: Jumbo Frames

    1 d-link dge-530t user manual section 3 - advanced features jumbo frames jumbo frames are ethernet frames that are larger than 1518 bytes. Jumbo frames may be used to reduce server cpu utilization and improve wire efficiency. By implementing extra data in fewer packets, jumbo frames can increase thr...

  • Page 15: Snmp

    15 d-link dge-530t user manual section 3 - advanced features snmp snmp is an acronym for simple network management protocol. This network protocol is used to manage tcp/ip networks by using “traps” sent from devices compliant with snmp and collected by one or more servers. Devices that comply with s...

  • Page 16: The Cable Diagnostic Feature

    1 d-link dge-530t user manual section 3 - advanced features the cable diagnostic feature within the d-link network control program is a feature for examining the quality and the characteristics of a network cable that has been connected to the dge-530t. This feature, named the virtual cable tester (...

  • Page 17: The D-Link Snmp Agent

    1 d-link dge-530t user manual section - snmp agent the d-link snmp agent included on the installation cd is a program for viewing and configuring the dge-530t, known as the d-link snmp agent. This agent will allow the user to view error packets, set passwords and choose nic card options on your comp...

  • Page 18

    1 d-link dge-530t user manual section - snmp agent the install wizard screen will appear. Click next click next the choose destination location page will appear. Click browse to select another folder to install pc agent. Otherwise click next to select the default folder c:\ program files\dlink\pc ag...

  • Page 19

    1 d-link dge-530t user manual section - snmp agent click finish click yes, i want to restart my computer now and then click finish..

  • Page 20: Configuration

    0 d-link dge-530t user manual section - snmp agent after successfully installing the d-link ethernet adapter agent and restarting your computer, the function is enabled by clicking start > programs > d-link pc agent > d-link pc agent. Windows will then prompt the user to choose an ethernet card from...

  • Page 21

    1 d-link dge-530t user manual section - snmp agent after choosing the d-link dge-530t gigabit ethernet adapter and clicking ok, the user will be prompted with another window to input some personal information. You may input this information now or to set this information later, simply click ok. A br...

  • Page 22

    D-link dge-530t user manual section - snmp agent clicking the options tab will display the following screen. Here the user may check the “auto launch when windows starts up.” box to ensure the d-link ethernet adapter agent will automatically start when the windows operating system commences. To adju...

  • Page 23

    3 d-link dge-530t user manual section - snmp agent the user may set the following fields. • name: a name chosen to identify the user when configuring the dge-530t. • location: the user may identify the physical location of the computer where the ethernet card is installed. • contact: information on ...

  • Page 24: Snmp Functions

    D-link dge-530t user manual section - snmp agent now you can use any mib browser, for example the d-link mib compiler, to view information on the workstation with the dge-530t card snmp agent feature. The d-link network adapter snmp agent supports the following functions of the dlk_pc.Mib: function ...

  • Page 25

    5 d-link dge-530t user manual section - snmp agent function description hrmemorysize the amount of physical main memory contained by the host. Hrstoragetable the (conceptual) table of logical storage areas on the host. Hrstorageindex a unique value for each logical storage area contained by the host...

  • Page 26: Troubleshooting

    D-link dge-530t user manual section 5 - troubleshooting troubleshooting if you experience any problems with the adapter, check to see: • that the appropriate driver is loaded; • that the proper grade of cable is employed for the network connection; • that the supporting hub is properly qualified for...

  • Page 27: Networking Basics

    D-link dge-530t user manual appendix a - networking basics networking basics check your ip address after you install your new d-link adapter, by default, the tcp/ip settings should be set to obtain an ip address from a dhcp server (i.E router) automatically. To verify your ip address, please see the...

  • Page 28

    D-link dge-530t user manual appendix a - networking basics statically assign an ip address if you are not using a dhcp capable gateway/router, or you need to assign a static ip address, please follow the steps below. Step 1: windows ® 2000: click on start > settings > control panel > network connect...

  • Page 29

    D-link dge-530t user manual appendix a - networking basics set primary dns the same as the lan ip address of your router (192.168.0.1). The secondary dns is not needed or you may enter a dns server from your isp. Step 5: click ok twice to save your settings..

  • Page 30: Technical Specifications

    30 d-link dge-530t user manual appendix b - technical specifications technical specifications emc and safety certifications • fcc class b • ce class b • bsmi class b • c-tick host interface: 32-bit pci bus (bus master) i/o base address assigned by plug and play system interrupt number assigned by pl...

  • Page 31: Contacting Technical Support

    31 d-link dge-530t user manual appendix c - contacting technical support contacting technical support d-link provides free technical support for customers within canada for the duration of the warranty period on this product. Canadian customers can contact d-link technical support through our web si...

  • Page 32: Warranty

    3 d-link dge-530t user manual appendix d - warranty warranty subject to the terms and conditions set forth herein, d-link networks, inc. (“d-link”) provides this limited warranty: • only to the person or entity that originally purchased the product from d-link or its authorized reseller or distribut...

  • Page 33

    33 d-link dge-530t user manual appendix d - warranty to the software. Except as otherwise agreed by dlink in writing, the replacement software is provided only to the original licensee, and is subject to the terms and conditions of the license granted by d-link for the software. Replacement software...

  • Page 34

    3 d-link dge-530t user manual appendix d - warranty 2180 winston park drive, oakville, ontario, canada l6h 5w1. D-link will not be held responsible for any packages that are lost in transit to d-link. The repaired or replaced packages will be shipped to the customer via ups ground or any common carr...

  • Page 35

    35 d-link dge-530t user manual appendix d - warranty limitation of liability: to the maximum extent permitted by law, d-link is not liable under any contract, negligence, strict liability or other legal or equitable theory for any loss of use of the product, inconvenience or damages of any character...

  • Page 36

    3 d-link dge-530t user manual appendix d - warranty fcc statement: this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference in a resid...

  • Page 37: Registration

    3 d-link dge-530t user manual appendix e - registration version 2.5 december 15, 2008 product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Registration.