D-Link DGS-1210-28P Reference Manual - page 93
5 Command Line Interface
D-Link Web Smart Switch User Manual
88
create iproute
Purpose
Used to create IP route entries to the Switch’s IP routing table.
Syntax
create iproute default
Description
The
create iproute
command is used to create a default static IP
route entry to the Switch’s IP routing table.
Parameters
default
– Specifies to create a default IP route entry.
−
The gateway IP address for the next hop router.
Restrictions
Only Administrator, operator and power user-level users can
issue this command.
Example usage:
To add the default static address 10.90.90.92 to the routing table:
DGS-1210-28
>
create iproute default 10.90.90.92
Command: create iproute default 10.90.90.92
Success.
DGS-1210-28>
delete iproute
Purpose
Used to delete an IP route entry from the Switch’s IP routing
table.
Syntax
delete iproute {default}
Description
The
delete iproute
command will delete an existing IP route
entry from the Switch’s IP routing table.
Parameters
{
default}
– Specifies to delete a default IP route entry.
Restrictions
Only Administrator, operator and power user-level users can
issue this command.
Example usage:
To delete the default Gateway from the routing table:
DGS-1210-28
>
delete iproute
Command: delete iproute
Success.
DGS-1210-28>
show iproute
Purpose
Used to display the Switch’s current IP routing table.