D-Link DGS-1216T - Switch Manual - page 35
Other manuals for DGS-1216T - Switch:
Product Manual, User Manual, User Manual, Quick installation guid
Manual is about: 16-Port 10/100/1000Mbps Gigabit Ethernet Switch + 2-Port mini GBIC Web-Smart Switch
of
61
29
2. The priority of Gigabit Fiber port is higher than
Copper.
To change the port setting, click on the ID parameter to enter to the
selected port to configure its Speed/Disable and Flow control setting.
Figure 18.
Speed/Disable:
This setting has six modes—100M Full, 100M Half, 10M Full, 10M
Half, Auto and Disable—for speed or port disable selections.
Flow Control:
This setting determines whether or not the Switch will be handling
flow control. Set FlowCtrl to Enable for avoiding data transfer
overflow. Or it sets to Disable; there is either no flow control or other
hardware/software management.
When the port is set to forced mode, then the flow control will
automatically set to Disable.
Default Priority: