D-Link DGS-3208TG - Switch User Manual - Bout
Gigabit Ethernet Switch User’s Guide
v
0
A
BOUT
T
HIS
G
UIDE
This user’s guide tells you how to install your DGS-3208TG stand-alone Switch, how to connect it to your
Gigabit Ethernet network, and how to set its configuration using either the built-in console interface or Web-
based management.
Terms
For simplicity, this documentation uses the terms “Switch” (first letter upper case) to refer to the DGS-
3208TG Gigabit Ethernet Switch, and “switch” (first letter lower case) to refer to all Ethernet switches,
including the DGS-3208TG.
Overview of this User’s Guide
♦
Chapter 1, “Introduction.” Describes the Switch and its features.
♦
Chapter 2, “Unpacking and Setup.” Helps you get started with the basic installation of the Switch.
♦
Chapter 3, “Identifying External Components.” Describes the front panel, rear panel, side panels, and
LED indicators of the Switch.
♦
Chapter 4, “Connecting the Switch.” Tells how you can connect the DGS-3208TG to your Gigabit
Ethernet network.
♦
Chapter 5, “Switch Management Concepts.” Talks about local console management via the RS-232 DCE
console port and other aspects about how to manage the Switch.
♦
Chapter 6, “Using the Console Interface.” Tells how to use the built-in console interface to change, set,
and monitor Switch performance and security.
♦
Chapter 7, “Web-Based Network Management.” Tells how to manage the Switch through an Internet
browser.
♦
Appendix A, “Technical Specifications.” Lists the technical specifications of the DGS-3208TG.