D-Link DKVM-8E User Manual - Trouble Shooting
Manual is about: 8- Port Keyboard, Video, and Mouse Switch
of
41
Trouble Shooting
General Problems
Q: The OSD menu does not display a “
☼
“ on a channel
where a computer is connected and powered up.
What do I do?
A: ˙DKVM-8E will updated “
☼
“ every 2 seconds. Using hot
key to access the OSD menu again and it should
have re-detected all the active channels.
Q: When cascading the MASTER unit does not see the
slave unit(s).
A: ˙Refer to the Installation section for information on how
to properly connect the daisy-chain cable.
˙Make sure the daisy-chain cable that you are using is
right. Using any other cable will not guarantee
proper operation or video quality.
˙Reset the all slave unit first and then reset master
unit to get the lost slave unit.
˙Although a power supply is not necessary to make
the slave unit work, try adding a power supply.
- 23 -