1. DL manuals
  2. D-Link
  3. Printer
  4. DPR-1061
  5. Manual

D-Link DPR-1061 Manual - Ps Software

Manual is about: Manual

Summary of DPR-1061

  • Page 1

    I d-link dpr-1061 usb 2.0 mfp server manual rev. 05 (october, 2007).

  • Page 2: Contents

    Ii contents package contents ................................................................................................. Iv contents of package:...................................................................................... Iv system requirements:...........................................

  • Page 3

    Iii help .............................................................................................................83 reboot ...........................................................................................................84 refresh printer status...........................................

  • Page 4: Package Contents

    Iv package contents contents of package: d-link dpr-1061 usb 2.0 mfp server manual on cd printed quick installation guide if any of the above items are missing, please contact your reseller. System requirements: a computer with an installed ethernet adapter windows vista/xp/2000/nt4/me/98se/95 apple...

  • Page 5: Introduction

    1 introduction the d-link dpr-1061 print server is an ethernet/usb print server that connects to your ethernet, fast ethernet or usb network anywhere you wish to locate printer services. The dpr-1061 manages the flow of print files from workstations or file servers to connected printers, delivering ...

  • Page 6

    2 because the dpr-1061’s very portable and inexpensive compared to a pc-based print server, and print server connects to your file servers through the network, printers can be deployed to locations of maximum convenience to users. Use usb redirection software (ps-link) to support mfp printer’s print...

  • Page 7

    3 ¾ ps-link － a useful tool for you supporting multi-functions (print/ scan/ copy/ fax) of a mfp printer, printing of gdi printer, and even other multimedia software of any mfp/gdi printer. For the detail information, see the “using the ps software” chapter in this manual. ¾ ps-wizard －a simple tool...

  • Page 8: External Features

    4 external features port connectors the dpr-1061’s three printer ports are located on its rear panel. Two usb and one parallel ports are labeled usb1, usb2, and lpt. These printer ports are independently configurable using the web configuration interface. The print server’s web configuration permits...

  • Page 9: Rear Panel Connectors

    5 rear panel connectors network cable connector the print server’s rear panel feature an rj-45 connector for connection to 10base-t ethernet cabling or 100base-tx fast ethernet cabling (which should be category 5 twisted-pair cable). The port supports the nway protocol, allowing the print server to ...

  • Page 10: Led Indicators

    6 led indicators the front panel of the print server features five led indicators: power steady green confirms that the print server is powered on. Link/act steady green confirms that the print server has a good connection to the ethernet or fast ethernet network. The indicator blinks off briefly to...

  • Page 11: Setting Up The Dpr-1061

    7 setting up the dpr-1061 installing the print server warning : configuration problems may result if the print server is powered up without first establishing its network connection. Follow this procedure to avoid complications at the configuration stage. 1. Confirm proper operation of each of the p...

  • Page 12: Power On Self-Test

    8 power on self-test every dpr-1061 has been factory-tested to operate properly. When the dpr-1061 is powered on, it also automatically performs a self-test on each of its major components. The final result of the self-test is signaled by the state of the usb1, usb2 and lpt led indicators following ...

  • Page 13

    9 led usb1 usb2 lpt faulty component 1 long 8 short lpt controller error 1 long 9 short lpt error 1 long 14 short lan mii error 1 long 18 short usb error.

  • Page 14: Getting Started

    10 getting started below is a sample network using the dpr-1061. The dpr-1061 has a built- in web-based management feature that allows users to easily configure and manage multiple print queues through tcp/ip. Warning : only a usb printer may be connected to the usb port of the dpr-1061. Do not conn...

  • Page 15: Using Ps Software

    11 using ps software this chapter will introduce you the installation and operation of various useful software program – ps software (contains ps-link and ps-wizard) with which the mfp server is featured. Auto-run installation insert the installation cd-rom into your computer’s cd-rom drive to initi...

  • Page 16: Ps Software

    12 ps software to avoid the conflict in your network, you can use ps software to change the related settings of your mfp server (such as the ip address) after finishing the installation of ps software on your pc. The ps software contains two utilities: ps-link and ps-wizard. Installing ps software 1...

  • Page 17

    13 2. Click next> button in the welcome window of installshield wizard. 3. Specify the destination location by pressing browse… button. Otherwise, leave the default setting and click next> button to continue..

  • Page 18

    14 4. You may enter a new folder name in the program folder field if you want to change the default name. Otherwise, you may leave the default setting and click next> button to go on the installation. 5. The installshield wizard starts to install the software, and the progress bar indicates the inst...

  • Page 19

    15 after installing the program, the application program for the mfp server is automatically installed to your computer, and creates a folder in startÎ programsÎ ps software. The ps software contains two utilities: ps-link and ps-wizard..

  • Page 20: Using Ps-Link

    16 using ps-link ps-link, supports for windows 2000/xp/2003/vista, is a useful tool for you setting up multi-function (print/ scan/ copy/ fax) of a mfp printer, printing of gdi printer, and even other multimedia software of any mfp/gdi printer. That is, the main goal and advantage of the ps-link is ...

  • Page 21

    17 server name: a list displays the name of the connected mfp server within the network. Discover: you may click this button to manually research the current connected mfp server. Status bar: display the current status about the system and the numbers of the connecting mfp servers. Information:this ...

  • Page 22

    18 [setup wizard] – setup wizard is a step-by-step setup interface, which correspond with the configuration of the web-based configuration utility, allowing user to do basic setup easily. When this button is clicked, a welcome window will show up as the following. The setup wizard allows you to do a...

  • Page 23

    19 system settings.

  • Page 24

    20 change ip address:.

  • Page 25

    21 workgroup of microsoft network.

  • Page 26

    22 appletalk settings.

  • Page 27

    23 after done the configuration, click save to restore the current setting or cancel to abort..

  • Page 28

    24 [change ip address] - click this button to bring up the following pop-up window, which allows you to change the ip address of the mfp server in two methods: manually assign or dhcp assign automatically. When done the setting, click ok button or cancel button to abort. [web setup] – when this butt...

  • Page 29

    25 printer port: this field not only displays the basic information and current status of the connected printer, but also allows you to do further configuration in the use of the four control buttons (link, unlink, lock, unlock). [link] – the function of this button is to simulate the physical conne...

  • Page 30

    26 installing and using mfp/gdi printer this section will introduce you how to start the initial installation of various mfp/gdi printer in the use of the printer manufacturer’s cd-rom. Likewise, how to use mfp/gdi printer through the ps-link utility of the mfp server after the printer manufacturer’...

  • Page 31

    27 for hp: 1. When the installation program asks you to connect the usb cable, you are allowed to connect the printer with you computer later by checking the box. Then click next> button to continue the rest of the installation (generally, for other multimedia software such as scanner driver, etc.)..

  • Page 32

    28 2. When the installation of all drivers of the mfp/gdi printer cd-rom on your computer is done, you may use ps-link to complete the physical connection between the mfp/gdi printer and your computer by clicking [link] button..

  • Page 33

    29 as long as the connection is linked successfully, a prompt of ps-link as below will show up to inform you. Press ok to exit. 3. Now the mfp/gdi printer is ready to serve you with its multi-functions (print/scan/copy/fax). You may start to use the mfp/gdi printer through your computer..

  • Page 34

    30 for epson:.

  • Page 35

    31 1. When the installation program asks you to connect the usb cable of the mfp/gdi printer to your computer, you are not allowed to ignore it; therefore, you need to utilize ps-link to complete it. 2. Launch the ps-link utility and click the [link] button..

  • Page 36

    32 when the connection is completed successfully, a prompt as below will show up to inform you. Press ok to exit. 3. Then you have to go back to continue the installation of the mfp/gdi printer cd-rom on your computer in order to complete the rest of installation steps. 4. When the whole installatio...

  • Page 37

    33 for canon: 1. When the installation program asks you to attach the mfp/gdi printer to your computer, you are not allowed to skip this step; therefore, you need to utilize ps-link to complete such physical connection..

  • Page 38

    34 2. Launch the ps-link utility and click the [link] button..

  • Page 39

    35 when the connection is completed successfully, a prompt as below will show up to inform you. Press ok to exit. 3. Then you have to go back to do the installation of mfp/gdi printer cd-rom on your computer in order to complete the rest of installation steps. 4. When the whole installation of the m...

  • Page 40

    36 for lexmark: 1. When the installation program asks you to attach the mfp/gdi printer to your computer, then you have to follow; otherwise, you will not allow continuing the installation. Therefore, you need to utilize ps-link to complete it without doing physical connection for the mfp/gdi printe...

  • Page 41

    37 2. Launch the ps-link utility and click the [link] button..

  • Page 42

    38 when the connection is completed successfully, a prompt as below will show up to inform you. Press ok to exit. 3. Then you have to go back to finish the installation of mfp/gdi printer cd-rom on your computer for completing the rest of installation steps. 4. When the whole installation of the mfp...

  • Page 43

    39 for samsung:.

  • Page 44

    40 1. When the installation program asks you to connect the printer to your computer, just ignore it and click next> button to continue. 2. Soon after next> button is clicked, the program will prompt you again to connect the two devices, click no to ignore it and go on the rest of the installation (...

  • Page 45

    41 3. After the installation of the mfp/gid cd-rom is finished, you may start to utilize ps-link to complete the physical connection between the mfp/gdi printer and your computer. Click the [link] button of the ps-link window as below. When the connection is done successfully, a prompt of ps-link wi...

  • Page 46

    42 for brother: 1. When the installation program asks you to plug in the usb cable of the mfp/gdi printer to your computer, then you have to follow; otherwise, you will not allow continuing the installation. Therefore, you need to utilize ps-link to complete it without doing physical connection for ...

  • Page 47

    43 2. Launch the ps-link utility and click the [link] button..

  • Page 48

    44 when the connection is completed successfully, a prompt as below will show up to inform you. Press ok to exit. 3. Then you have to go back to finish the installation of mfp/gdi printer cd-rom on your computer for completing the rest of installation steps. 4. When the whole installation of the mfp...

  • Page 49

    45 for fuji xerox: 1. Owing to the installation program of xerox mfp/gdi printer will not request you to do physical connection between the printer and your computer during the installation of the mfp/gdi printer driver on your computer, you may just accomplish the whole installation on your compute...

  • Page 50

    46 2. While after the installation is finished, you have to link the connection between the mfp/gdi printer and your computer in order to use the mfp/gdi printer on your computer. Thus, you need to utilize ps-link to link the two devices. Launch the ps-link utility and click the [link] button. When ...

  • Page 51: Using Ps-Wizard

    47 using ps-wizard ps-wizard, supports for windows 2000/xp/2003/vista, is a simple and useful tool for you easily adding a printer on your computer in order to quickly start your printing task without any complicated configuration. That is, the main goal and advantage of the ps-wizard is to let you ...

  • Page 52

    48 print server: this field allows you to manually discover the connected mfp server and to do further configuration of the mfp server that is selected from the list..

  • Page 53

    49 lan: you may also to specify dynamic or static ip address for your mfp server. Then click apply button to implement the new setting. Port information: this is the main function of the ps-wizard for you to easily add a printer on your computer. To add a printer, click , then the following window w...

  • Page 54

    50 the wizard provides three ways for you to select printer driver: 1. Show current installed drivers: you may select this option, “show currently installed drivers”, to check if the same printer driver already existed for use. If not, you may try the next method. After done the selection of printer...

  • Page 55

    51 after done the selection of printer driver, the wizard will ask you to confirm your selection again in the following window. Beside, you are allowed to edit the name of the printer in the field “network printer name” and enable this printer as the default printer by checking the box “use this pri...

  • Page 56

    52 when the following window shows up, you may do print test by clicking print test page button to check if you can do printing normally. If yes, then click finish button to exit the installation window and now you may start your printing tasks..

  • Page 57: Using The Web Configuration

    53 using the web configuration home to begin managing the dpr-1061, simply launch the browser (e.G. Internet explorer 6.0 used in this manual) you have installed on your computer and direct it to the url address: dlink-xxxxxx, where xxxxxx are the last six digits of dpr-1061’s mac address. The mac a...

  • Page 58

    54 display its submenu and select a desired option listed in the left column, and then the corresponding content will show up in the center column..

  • Page 59: Setup > Print Server Setup

    55 setup > print server setup the print server setup screen allows you to modify the print server name and port name, as below shows. D-link does not recommend changing these settings unless asked to do so by your network administrator..

  • Page 60

    56 print server name in this field, you can configure the basic information of mfp server. The basic information contains a name of the print server, assigned in server name field, and a location for the print server, assigned in location (optional) field. Port settings in this field, you can assign...

  • Page 61: Setup > Lan Setup

    57 setup > lan setup the lan setup screen allows you configure the local network settings of mfp server. Please note that this section is optional and you should not need to change any of the settings here to get mfp server up and running. Tcp/ip this field allows you to assign ip address in manual ...

  • Page 62: Setup > Printer Setup

    58 setup > printer setup the printer setup screen allows you install the printer drivers for the printer currently connected to your print server. Network printer wizard clicking next to download and run a windows wizard program which will install a network printer onto your computer. When you click...

  • Page 63

    59 the above screen is the network printer wizard so please click run, and if a second window appears as below click run again..

  • Page 64

    60 please select the printer required, then click next to continue..

  • Page 65

    61 the wizard provides three ways for you to select printer driver: 1. Show current installed drivers: you may select this option, “show currently installed drivers”, to check if the same printer driver already existed for use. If not, you may try the next method. After done the selection of printer...

  • Page 66

    62 2. Select from manufacturer list: check this option, “select from manufacturer list”, to manually select your printer from drop-down menus by brand and model. Click next> button to continue when you find a desired driver. If not, try the last way (have disk). After done the selection of printer d...

  • Page 67

    63 3. Have disk: click have disk button to bring up the following window. Insert the manufacture’s installation cd-rom to install the printer driver. After the correct driver is selected, click ok button to continue. After done the selection of printer driver, the wizard will ask you to confirm your...

  • Page 68

    64.

  • Page 69

    65 when the following window shows up, you may do print test by clicking print test page button to check if you can do printing normally. If yes, click ok button to close the d-link add printer wizard dialogue screen..

  • Page 70

    66 if yes, then click finish button to exit the installation window and now you may start your printing tasks..

  • Page 71: Advanced > Advanced Lan

    67 advanced > advanced lan the advanced lan screen allows you to further network setting of mfp server, while you are recommended better not to change the settings unless instructed to modify the setting by your network administrator. The advanced lan screen contains these fields: tcp/ip, microsoft ...

  • Page 72

    68 tcp/ip this field contains four options that allow you to configure the tcp/ip setting: dns server address, upnp, mac bonjour/rendezvous, and second http port. Upnp: this option allows you to enable or disable upnp function. Mac bonjour/rendezvous: this option allows you to enable or disable mac ...

  • Page 73: Advanced > User Access

    69 advanced > user access the user access screen allows you to create and maintain an authorized list of users that are allowed to access the mfp server. User access by configuring the enable authorised user list option (yes), the user in the user list is permitted to access the print server. Any us...

  • Page 74

    70 authorised users you can add or delete any user to or from the user list. The user list at the bottom of the screen displays the current defined user and related information for the print server..

  • Page 75

    71 advanced > e-mail notification the e-mail notification screen allows you to assign an e-mail address to the mfp server, so that your mail of the account can be printed out directly through the printer (ascii text only). This screen also allow you choose where to send an email when the printer sta...

  • Page 76

    72 enable e-mail notification you can set the print server to send an alert message when the printer status changes through e-mail. To enable this function, set the enable e-mail notification option to yes. Then, input the administrator's e-mail address in the destination e-mail address field. E-mai...

  • Page 77: Advanced > Snmp

    73 advanced > snmp the snmp screen allows you to use snmp (simple network management protocol) to manage complex networks. Snmp management community 1/2/3: enter a name in the name frame, and configure the access right by selecting read only or read/ write from the pull-down menu..

  • Page 78: Maintenance > Password

    74 maintenance > password the password screen allows you to change the password of the mfp server by entering the current password in current password field and new password in new password and confirm password fields. After done the configuration, click apply settings to enable and restore the new ...

  • Page 79

    75 maintenance > save/restore settings the save/restore settings screen not only allows you to save the current configuration in a computer for backup by clicking save, but also allows you to reload a configuration that you saved before by clicking browse to direct to the backup file, and then click...

  • Page 80

    76 maintenance > firmware upgrade the firmware upgrade screen displays you the current firmware’s information of the mfp server, and also allows you to upgrade the firmware of the mfp server when a new version of firmware is available. Click browse to point to the firmware file, and then click upgra...

  • Page 81: Maintenance > Diagnostics

    77 maintenance > diagnostics the diagnostics screen allows you to test the printing for each port of the mfp server: usb1, usb2, and lpt. After done the port selection, click print test page to print a test page..

  • Page 82: Status > Device Info

    78 status > device info the device info screen displays the status of your mfp server, printer, and network for your reference..

  • Page 83

    79 print server status this field displays the information of the print server about the firmware version, mac/ip address, and up time. Printer status the items in this field display the information of the printer, such as the given name for the printer, speed, printer status, and status of your pri...

  • Page 84: Status > Network

    80 status > network the network screen displays the general network status of your mfp server, including: auto ip this field contains the current settings of tcp/ip, including dhcp/bootp, upnp, and mac bonjour/rendezvous. The items in this field are configured in advanced Æ advanced lan Æ tcp/ip. Tc...

  • Page 85

    81.

  • Page 86: Status >Print Log

    82 status >print log the print log screen displays the printing record of the authorized users. Print log the items in this field display the user(s) information, which include the user(s) mac address, ip address, name, and status of printing tasks..

  • Page 87: Help

    83 help the help screen provides you brief information about the mfp server for your reference..

  • Page 88: Reboot

    84 reboot if you want to reset the mfp server, you may just click the reboot for restarting. Refresh printer status click usb1, usb2, lpt to refresh printer status..

  • Page 89

    85 tcp/ip printing for windows vista go to start Î control panel Î printers..

  • Page 90

    86 click add a printer. Select the first option, add a local printer, and then click next..

  • Page 91

    87 select the second option, create a new port, and highlight standard tcp/ip port from the pull-down menu. Click next. Type the ip address of the mfp server (e.G. 10.62.31.15 used in this manual), which can be referred from the printer server status of the mfp server’s web configuration, and then t...

  • Page 92

    88.

  • Page 93

    89 select custom and click settings..

  • Page 94

    90 then the follow screen will shows up, select lpr from the protocol field. Then enter the queue name, which can be referred from printer status of the mfp server’s web configuration, in the lpr settings field. Click ok..

  • Page 95

    91.

  • Page 96

    92 highlight the printer, as shown. If the desired printer is not on the list, click have disk and insert the printer driver disk that came with your printer to install the printer drivers. Click next.

  • Page 97

    93 click next..

  • Page 98

    94 after clicked print a test page, a small dialogue box will show up as below. Click close..

  • Page 99

    95 click finish. The printer is now ready for printing with windows vista on your network..

  • Page 100

    96 tcp/ip printing for windows xp go to start Î printers and faxes Î add a printer. When the following screen shows up, click next..

  • Page 101

    97 select the first option, local printer attached to this computer, and click next..

  • Page 102

    98 select the second option, create a new port, and highlight standard tcp/ip port from the pull-down menu. Click next. Type the ip address of the mfp server (e.G. 10.62.31.15 used in this manual), which can be referred from the printer server status of the mfp server’s web configuration, and then t...

  • Page 103

    99.

  • Page 104

    100 select custom and click settings..

  • Page 105

    101 then the follow screen will shows up, select lpr from the protocol field. Then enter the queue name, which can be referred from printer status of the mfp server’s web configuration, in the lpr settings field. Click ok..

  • Page 106

    102.

  • Page 107

    103 click next..

  • Page 108

    104 click finish..

  • Page 109

    105 highlight the printer, as shown. If the desired printer is not on the list, click have disk and insert the printer driver disk that came with your printer to install the printer drivers. Click next.

  • Page 110

    106 at this screen, you can input a name for the printer, and then click next select yes to print a test page, click next..

  • Page 111

    107 click finish. The printer is now ready for printing with windows xp on your network..

  • Page 112

    108 tcp/ip printing for windows 2000 go to start Î settings Î printers and faxes Î add a printer. When the following screen shows up, click next..

  • Page 113

    109 select the first option, local printer attached to this computer, and click next..

  • Page 114

    110 click next. Select the second option, create a new port, and highlight standard tcp/ip port from the pull-down menu. Click next..

  • Page 115

    111 click next. Type the ip address of the mfp server (e.G. 10.62.31.15 used in this manual), which can be checked from the printer server status of the mfp server’s web configuration, and then the port name will automatically be filled in. Click next.

  • Page 116

    112.

  • Page 117

    113 select custom and click settings..

  • Page 118

    114 then the follow screen will shows up, select lpr from the protocol field. Then enter the queue name, which can be referred from printer status of the mfp server’s web configuration, in the lpr settings field. Click ok..

  • Page 119

    115.

  • Page 120

    116 click next. Click finish..

  • Page 121

    117 highlight the printer, as shown. If the desired printer is not on the list, click have disk and insert the printer driver disk that came with your printer to install the printer drivers. Click next..

  • Page 122

    118 at this screen, you can input a name for the printer, and then click next select the first option, do not share this printer, and click next..

  • Page 123

    119 select yes to print a test page, click next..

  • Page 124

    120 click finish. The printer is now ready for printing with windows 2000 on your network..

  • Page 125

    121 tcp/ip printingfor windows 98se/me go to start Î settings Î control panel. Double click on network, and then click add..

  • Page 126

    122 highlight client and click add. At this window, click have disk..

  • Page 127

    123 1. Insert the dpp-1061 cd-rom into your cd-rom drive. Select the letter representing the cd-rom drive on your computer from the pull-down menu. 2. Double-click on the folder lpr. 3. Highlight lpr.Inf 4. Click ok. Click ok to accept the location of the file..

  • Page 128

    124 you should now be back to the network properties page. Highlight lpr for tcp/ip printing and click properties..

  • Page 129

    125 click add port..

  • Page 130

    126 type in the ip address and port name of the mfp server, which can be referred from the printer server status and printer status of the mfp server’s web configuration, in the corresponding field, and then click ok. (the ip address and port name here are just for example only.).

  • Page 131

    127.

  • Page 132

    128 the ip address and port name will be displayed in the following screen. (the ip address and port name here are just for example only.) click ok..

  • Page 133

    129 click ok..

  • Page 134

    130 windows will ask for a restart. Click yes. Once your computer has rebooted, click on start Î settings Î printers Î add printer. When the add printer wizard screen appears, click next..

  • Page 135

    131 select network printer and click next..

  • Page 136

    132 type in the path if you know it; otherwise, click browse..

  • Page 137

    133 at the following screen, browse for the printer port and highlight the port (e.G. Dlink-1d6fa3 in this manual). Click ok..

  • Page 138

    134 if the network path is not specified, type in the ip address and port name of the mfp server. Select yes or no to enable or disable printing from ms-dos based programs. Click next..

  • Page 139

    135 highlight the printer, as shown. If the desired printer is not on the list, click have disk and insert the printer driver disk that came with your printer to install the printer drivers. Click next..

  • Page 140

    136 click next select yes to print a test page. Click finish..

  • Page 141

    137 to check whether the printer is installed, go to start Î settings Î printers..

  • Page 142: Unix/linux Printing

    138 unix/linux printing printing text files form unix text files on unix systems contain lines that end with “newline” characters, as opposed to ms-dos and windows-related operating systems that end with a carriage return followed by a linefeed. Most printers require a carriage return/linefeed pair ...

  • Page 143

    139 printing form bsd unix versions for “flavors” of the unix operating system derived from or related to the bsd releases, such as sunos 4.X, linux, bsd/os, freebsd, or netbsd, you can use the following procedure to enable users to print to a printer connected to your d-link network print server: 1...

  • Page 144: Lp=

    140 chown bin.Daemon /var/spool/hp5l chmod 775 /var/spool/hp5l 5. Add an entry for the printer to /etc/printcap, similar to the following: hp5l:\ :lp=:sd=/var/spool/hp5l :mx#0:\ :rm=ps-142634:rp=ps-142634-p1: the meaning of each of the entries is described below. The directory path in the sd spool d...

  • Page 145: Sd=Dir

    141 ◆ sd=dir the location of the printer’s local spool directory. ◆ mx#blocks the limit for print job files in the local spool directory; 0 means no limit. ◆ rm=address the host where the remote printer is located, in this case the d-link print server. ◆ rp=printer the name of the printer on the rem...

  • Page 146

    142 printing from sco unix system v/386 to allow printing to a printer attached to your d-link network print server from a sco unix system v/386 host. 1. Login as the superuser (root). 2. Add an entry for the print server in the host’s /etc/hosts file, giving a hostname for the print server’s ip add...

  • Page 147

    143 7. Answer r (remote printer) to the question is printer a remote printer or a local printer (r/l)? 8. When prompted with the question: please enter the name of the remote host that printer is attached to: then enter the address of the d-link print server. You can use the name you added to /etc/h...

  • Page 148: Printing From Solaris

    144 printing from solaris to allow printing from a sun solaris workstation, 1. Log in as the superuser (root). 2. Add an entry for the print server in the host’s /etc/hosts file, giving a hostname for the print server’s ip address. A line in /etc/hosts contains an ip address and one or more aliases ...

  • Page 149: Printing From Red Hat Linux

    145 printing from red hat linux adding a printer 1. Click the printer icon at the bottom of the desktop. 2. Since no printer is set up so far, a prompt appears asking to run the printer configuration tool..

  • Page 150

    146 3. Click the ok button in the pop-up dialogue box to open the man printer configuration tool menu. Note that to use the printer configuration tool you must have root privileges, and to start the application you may also type the command: “redhat-config-printer”. 4. Click the new button in the pr...

  • Page 151

    147 printer configuration tool menu 5. The add a new print queue menu appears, click forward to continue..

  • Page 152

    148 6. Enter a unique name for the printer in the name text field. The printer name cannot contain spaces and must begin with a letter. The printer name may contain letters, numbers, dashes (-), and underscores (_). Optionally, enter a short description for the printer, which can contain spaces. The...

  • Page 153

    149 8. Select the printer model..

  • Page 154

    150 if a printer has not been detected automatically, select the model from the list. You can manually select the name of the printer manufacturer from the generic (click to select manufacturer) pull-down menu, and the printer model from the sub-list. Click forward to continue. 9. The last step is t...

  • Page 155

    151 10. Print a test page to make sure the printer is functioning properly. To print a test page, select the printer from the printer list, then select the appropriate test page from the test drop-down menu..

  • Page 156

    152 setting up printing in mac os x tiger(10.4) note: mac os printing is supported by postscript printers only! With mac os x tiger (10.4), you can use apple talk, bonjour, internet printing protocol (ipp), line printer daemon (lpd), and hp jet direct-socket printing through print server. Click on t...

  • Page 157

    153 select the apple talk tab in the network menu. Check to select the make apple talk active option. Click on the apply now button and close the menu. Apple talk is now active on the system. Now a printer can be added..

  • Page 158: Adding A Printer

    154 adding a printer use the go menu at the top tool bar and select applications option and find the utilities folder or open the utilities folder directly in go menu. In the utilities folder, find and select to open printer list window. If no printer has been set up on your macintosh, you will be p...

  • Page 159

    155 mac os x tiger (10.4) supports five printing protocols: 1. Appletalk 2. Bonjour 3. Internet printing protocol (ipp) 4. Line printer daemon (lpd) 5. Hp jet direct – socket to add an internet printing protocol enabled, line printer daemon enabled or hp.

  • Page 160

    156 jet direct – socket enabled printer, click on the button and follow the instructions to add an ip printer beginning on “adding an ip printer” session..

  • Page 161

    157 appletalk-enabled or bonjour-enabled printers to add an appletalk-enabled or bonjour-enabled printer, click on the button in the printer browser menu..

  • Page 162

    158 select the printer model from printer name list and connection type in the printer browser menu. The printer name selected should be the same as that appearing listed in the printer server’s web manager. In the example here, the printer name is ps-c0d26a-u3. By default the printer browser will u...

  • Page 163

    159 the printer that has just been added will show up in the printer list menu, it might take a few seconds depending on network conditions. When the printer appears listed it is ready for use. Quite the printer setup utility and start printing..

  • Page 164: Adding An Ip Printer

    160 adding an ip printer to add an internet printing protocol enabled, line printer daemon enabled or hp jet direct – socket enabled printer, click on the ip printer button in the printer browser window. Select the desired printing protocol from the protocol drop-down menu..

  • Page 165

    161 type the ip address of the printer, the name will appear in the name field when the printer is found. The printer browser will indicate that it is verifying the address. If the printer is found, the printer browser will state “valid and complete address” under the address field. The printer util...

  • Page 166

    162 for set up lpd printing: 1. Enter the ip address of the print server to which the printer is attached in address field. 2. Type the port name in queue field. Click add button after done the section of printer model in the print using drop-down menu..

  • Page 167: “: 80”

    163 for set up ipp printing: 1. Enter the ip address of the print server to which the printer is attached in address field. After that, type “: 80” or “: second port” if print server’s second port is enabled. 2. Type the port name in queue field. Click add button after done the section of printer mo...

  • Page 168

    164 for set up socket printing: 1. Enter the ip address of the print server to which the printer is attached in address field. After that, type “: 9100” for port 1, “: 9101” for port 2 or “: 9102” for port 3. 2. Keep the blank in queue field. Click add button after done the section of printer model ...

  • Page 169

    165 when the installable options pop-up window shows up as below, click continue button..

  • Page 170

    166 the printer that has just been added will show up in the printer list menu, it might take a few seconds depending on network conditions. When the printer appears listed it is ready for use. Quite the printer setup utility and start printing..

  • Page 171: Mac Os X

    167 setting up appletalk or lpr printing in mac os x note : mac os printing is supported by postscript printers only! With mac osx you can use appletalk or lpr printers using ip protocols for printing through print servers. Open your system preferences window and click network. Select the appletalk ...

  • Page 172

    168 to print, open a document and select file Î print from the menu. Select edit printer list from the printer dialog box..

  • Page 173

    169 click add printer select the printing protocol preferred, appletalk or lpr printers using ip. In this example, appletalk has been selected..

  • Page 174

    170 appletalk protocol: after selecting appletalk, the port names of the print server will be displayed. The port names shown here are examples only. Click on the port to which the post-script printer is connected. Then select the printer model from the dialog box displayed here. Click add printer a...

  • Page 175

    171 lpr printers using ip protocol: when you select lpr printers using ip protocol, this window will appear. Type the ip address of the print server into the lpr printer‘s address field. In the queue name field, type in the port name of the post-script printer that is connected to the print server. ...

  • Page 176

    172 setting up appletalk printing in mac os 9 note : mac os printing is supported by postscript printers only! The appletalk network protocol is used with computers using the macos operating system. It can be used for network communications over standard ethernet or fast ethernet using the ethertalk...

  • Page 177

    173 which zone the print server should be in. You should locate the print server in the same zone as most of the users who will be using it. If your network is not divided into zones, the appletalk zone field should contain a single asterisk (*). For each printer port that will be used for appletalk...

  • Page 178

    174 appletalk enter the appletalk zone name in the box. In the following options, enter the related configuration, such as the printer type. Chooser name: display the print server's port name..

  • Page 179

    175 printer type: enter the printer's type in this box. Postscript level: select from the pull-down menu (level 1 or level 2). Font group: select from the pull-down menu. The exact procedure for selecting a postscript printer connected to mfp server may vary slightly, depending on what printer drive...

  • Page 180

    176 if you have not previously set this printer as the default, your computer will prompt you for a postscript printer description file. Choose select ppd. Select the appropriate printer description file for your printer. Click open. (if your printer is not listed, click generic to use a generic pri...

  • Page 181: Port Pinouts

    177 port pinouts the following table lists the pinouts of the print server’s 25-pin parallel port connector (identical to the connector used on most personal computers), as well as the 36-pin centronics connector used on most printers. Signal names beginning with n are active-low signals..

  • Page 182: Technical Specifications

    178 technical specifications printer connection printer port: usb 2.0 or parallel bi-directional communication: hewlett-packard pjl (printer job language) standard for bi-directional communication. Network connection network standards: 100base-tx fast ethernet network data transfer rate: 10/100 mbps...

  • Page 183

    179 appendix: dpr-1061 printer compatibility list mfp supported on windows 2000 sp4 and windows xp printer list results (*y=pass, n=fail, n/a=non-available function) printer manufacturer model printing scan fax 1. Avision mf3100l y y n/a 2. Benq cm3000 y y n/a 3. Brother mfc-210c y y y 4. Brother mf...

  • Page 184

    180 22. Dell photo 926 y y n/a 23. Dell photo 966 y y y 24. Epson pm-a970 y y n/a 25. Epson pm-a920 y y n/a 26. Epson pm-a820 y y n/a 27. Epson pm-a720 y y n/a 28. Epson pm-a950 y y n/a 29. Epson pm-a890 y y n/a 30. Epson pm-a750 y y n/a 31. Epson pm-a650 y y n/a 32. Epson stylus cx2900 y y n/a 33. ...

  • Page 185

    181 48. Hp psc1315 y y n/a 49. Hp photosmart c1350 y y n/a 50. Hp photosmart c1610 y y n/a 51. Hp photosmart c3180 y y n/a 52. Hp photosmart c4180 y y n/a 53. Hp photosmart c5180 y y n/a 54. Hp officejet 4255 y y y 55. Hp officejet 4355 y y y 56. Hp officejet 5510 y y y 57. Hp officejet 5610 y y y 5...

  • Page 186

    182 mfp supported on windows vista 32-bit printer list results (*y=pass, n=fail, n/a=non-available function) printer manufacturer model printing scan fax 1. Avision mf3100l y y n/a 2. Benq cm3000 driver not available n/a 3. Brother mfc-210c y y y 4. Brother mfc-420cn y y y 5. Brother mfc-3240c y y y...

  • Page 187

    183 24. Epson pm-a970 y y n/a 25. Epson pm-a920 y y n/a 26. Epson pm-a820 y y n/a 27. Epson pm-a720 y y n/a 28. Epson pm-a950 y y n/a 29. Epson pm-a890 y y n/a 30. Epson pm-a750 y y n/a 31. Epson pm-a650 y y n/a 32. Epson stylus cx2900 y y n/a 33. Epson stylus cx3700 y y n/a 34. Epson stylus cx3900 ...

  • Page 188

    184 50. Hp photosmart c1610 y y n/a 51. Hp photosmart c3180 y y n/a 52. Hp photosmart c4180 y y n/a 53. Hp photosmart c5180 y y n/a 54. Hp laserjet 3050 y y driver not available 55. Lexmark x3470 y y n/a 56. Lexmark x5470 y y y 57. Samsung scx-4100 y y n/a 58. Samsung scx-4200 y y n/a other printers...