D-Link DSL-200 User Manual - Oftware
13
3
4
S
OFTWARE
I
NSTALLATION
The DSL-200 can be used with the following operating systems:
♦
Microsoft Windows 98
♦
Microsoft Windows 98 Second Edition
♦
Microsoft Windows Millennium Edition
♦
Microsoft Windows 2000
The procedures for each system are slightly different so follow the instructions provided
for your PC’s operating system.
The Microsoft Plug and Play feature will automatically detect the modem after it has
been installed. A new window will appear for each step of the installation.
Once you have the driver installed and the Modem is connected, you should verify that
the ADSL service is working.
If you wish uninstall the Modem see Appendix B for instructions.
What Driver to Install
You will need to select one driver (see Step 5) to operate the Modem. The driver you use
will depend on the particular protocol used by your ADSL service provider. Ask your
DSL service provider to assist you in selecting either the WAN or LAN driver to operate
the Modem. Only one driver should be installed.
If your ADSL service uses the protocol defined by RFC 2364, PPP over ATM Adaptation
Layer 5, then you will need to install the WAN driver. If the protocol used for your
ADSL service is defined by RFC 1483, Multiprotocol Encapsulation over ATM
Adaptation Layer 5, then you will need to install the LAN driver.