D-Link DSL-200 User Manual - Encapsulation Method

7 

Encapsulation Method  

It may be necessary to use an encapsulation method that is different from the default 

method. The protocol used for your connection, and thus the driver you use will 

determine which encapsulation method is used. If your DSL service provider does not 

specify which method to use. Use the default encapsulation method. 

Modulation Method  

It may also be necessary to use a modulation method that is different from the default 

method. If your DSL service provider does not specify which method to use. Use the 

default modulation method. 

Additional Information  

WAN Driver Users If you are using the WAN driver, you must supply user account 

information (user name and password) to make the final network connection.  

LAN Driver Users If you are using the LAN driver, you may be required to manually 

configure your IP settings. Your DSL service provider will tell you if you need to 

configure your PCs IP settings.  

Unpacking 

Open the shipping carton and carefully remove all items. In addition to this User's 

Guide, make sure that you have: 

DSL-200

USB

         1. Modem 

          2. USB Cable              3. ADSL Cable         4. Installation CD 

1.  D-Link DSL-200 USB Modem 

2. USB cable 

3.  ADSL cable or connector 

4. Installation CD-ROM