D-Link DSL-2544N Quick Installation Manual
ENGLISH
DSL-2544N
If any of the above items are missing, please contact your reseller/retailer.
Dual Band Wireless N600 Gigabit ADSL2+ Modem Router (DSL-2544N)
Power Adapter
Ethernet Cable
ADSL2+ Microfilter/Splitter
Quick Install Guide
1
Power LED
A solid green light indicates a proper connection to the power supply.
2
ADSL LED
A solid green light indicates a proper connection to the ADSL enabled
telephone line.
3
Internet LED
A solid green light indicates a proper connection to your broadband
service. The light will blink during data transmission.
4
LAN (1~4) LEDs
A solid green light indicates a connection to a Gigabit Ethernet device
while an amber light indicates a connection to a 10/100 device. The
light will blink during data transmission.
5
2.4G Wireless LED A solid green light indicates that the 2.4G wireless is ready. The light
will blink during data transmission.
6
5G Wireless LED
A solid green light indicates that the 5G wireless is ready. The light will
blink during data transmission.
7
WPS LED
The light will blink during the WPS process.
8
USB LED
A solid green light indicates a connection to a USB device.
9
Power Button
Press to turn on or off the device.
10
Power Port
Connect the supplied power adapter.
11
USB Port
Connect USB devices such as printers, scanners or storage.
12
LAN (1~4) Ports
Connect Ethernet devices such as computers, switches, and game
consoles.
13
ADSL Port
Connect to an ADSL enabled telephone line and the supplied
microfilter/splitter.
1 3
5 7
9
10
12
11
13
1
Connect your existing Phone cable from the telephone outlet to the LINE
port on the Microfilter and your telephone handset into the PHONE port.
2
Connect the Phone cable from the DSL port on the Microfilter to the ADSL
port of the modem router.
3
Connect the Ethernet cable from the LAN port of the modem router to the
Ethernet port on your computer.
4
Plug the power adapter into your modem router and connect to an available
power outlet.
5
6
After the modem router has powered up, verify that the Power and ADSL
LEDs are both lit.
Continue with the Configuration section on the other side of this document.
Microfilter
Telephone Outlet
Package Contents
QUICK INSTALLATION GUIDE
Hardware Overview
Minimum Requirements
Connect your Modem Router
• Internet Provider Account Details - If you are using an Australian or New
Zeleand ADSL connection, you will need your user name and password. If you do
not have this information, contact your Internet provider.
Do not proceed until you have this information.
Before you Start
Internet Requirements:
• An activated ADSL telephone line and account with an Internet provider
or
• An active NBN/UFB connection and account with an Internet provider
Web-based Configuration Requirements:
Device with the following:
• An installed Ethernet adapter or wireless adapter
Supported Browsers:
• Internet Explorer 7 or higher
• Safari 4 or higher
• Chrome
• Firefox
Link’n Print Utility Requirements (optional):
• Windows XP/Vista/7/8/8.1
• Mac OS X (10.5, 10.6, 10.7, 10.8, 10.9)
2
Dual Band
Wireless N600
ADSL2+ Modem Router
4
6 8
Power Adapter
DSL-2544N
Computer
LINE
PHONE
Phone Cable
DSL-2544N
Microfilter
Ethernet Cable
DSL-2544N
Computer