D-Link DSL-2730U Quick Installation Manual - Troubleshooting

DSL-2730U

4

E

N

G

LI

S

H

TROUBLESHOOTING

SET-UP AND CONFIGURATION PROBLEMS

SETUP AND CONFIGURATION PROBLEMS

1.  HOW DO I CONFIGURE MY DSL-2730U ROUTER WITHOUT THE CD?

- Connect your PC to the router using an Ethernet cable.

- Open a web browser and enter the address http://192.168.1.1

- The default username is admin. The default password is admin.

- If you have changed the password and can not remember it, you will need to reset the router to 

set the password back to admin.

2. HOW DO I RESET MY DSL-2730U ROUTER TO FACTORY DEFAULT SETTINGS?

- Ensure the router is powered on.

- Press and hold the reset button on the rear of the device for 10 seconds.

  Note: Resetting the router to factory default will erase the current configuration settings. To re-

configure your settings, log into the router as outlined in question 1, then run the Setup Wizard.

3. WHY CAN I NOT GET AN INTERNET CONNECTION?

For ADSL users please contact your ISP to make sure the service has been enabled/connected 

by your ISP and that your ISP username and password is correct.