D-Link DSL-2750U User Manual - Parental Control
Appendix A – Troubleshooting
D-Link DSL-2750U User Manual
55
Destination IP
address[/prefix
length]
Enter the end IP address which you are creating the filter rule.
Destination Port
(port or port:port)
The Destination Port is the TCP/UDP port on either the LAN or WAN depending on if you are configuring an Outbound or
Inbound Filter rule.
Parental Control
Use this window to deny access to specified MAC address.
If you are setting up the MAC address blocking, click the
Add
button.
MAC address is a specially formatted text string (xx:xx:xx:xx:xx:xx) that
uniquely identification of a device. This section will allow users to block
devices with certain MAC addresses on the LAN.
To configure for MAC address blocking, enter the username into the
Username
field, click
Browser’s MAC Address
to have MAC address of
the LAN device, or click
Other MAC Address
and enter a MAC address
manually. Tick the checkboxes for the desired individual days of the week
and enter desired
Start Blocking Time
and
End Blocking Time
.
Click the
Save/Apply
button to save the configuration