I d-link dsl-302g adsl ethernet/usb modem manual version 100 rev. 102202 building networks for people.
Table of contents about this user’s guide........................................................................................................................... 1 introduction............................................................................................................................
1 about this user’s guide this user’s guide provides instructions on how to install the dsl-302g adsl modem and use it to connect a computer (or two computers) to the internet. If you are using a computer with a functioning ethernet port, you can use the quick installation guide to quickly establish...
Dsl-302g adsl ethernet modem user’s guide 2 introduction this section provides a brief description of the modem, its associated technologies and a list of modem features. What is adsl? Asymmetric digital subscriber line (adsl) is an access technology that utilizes ordinary copper telephone lines to ...
3 front panel place the modem in a location that allows a view of the led indicators. To save space you can use the feet to stand the device on either its right or left side. Front panel rear panel all cable connections to the modem are made at the rear panel. The factory reset button is located her...
Dsl-302g adsl ethernet modem user’s guide 4 led indicators the led indicators read as follows: power steady green light indicates the unit is powered on. Status lights steady green during the adsl negotiation phase & connection stage. Adsl: link steady green light indicates a valid adsl connection. ...
5 hardware installation this chapter describes the various network cable and power connections required to use the modem. Modem location when selecting the location for the modem be sure to allow room to access the connections on the rear panel. You will want to place the modem so that you will be a...
Dsl-302g adsl ethernet modem user’s guide 6 software installation in order to install the software driver for the modem, you first need to install the dsl-300 configuration utility, d-link’s gui based management software. This software can later be used to monitor the device or change its settings. ...
7 3. The user information window asks you for your name and company name. Enter this information in the appropriate field and click next. 4. In the choose destination location window you may accept to install the configuration utility in the automatically chosen directory by clicking next. Or you ca...
Dsl-302g adsl ethernet modem user’s guide 8 6. The start copying files window provides an opportunity to review the information you have just entered. If you are satisfied with the information as it is listed, click next. If you need to change any of the information click back to go to the previous ...
9 configure the modem with the configuration utility software installed, you are ready to configure the modem. You must enter the vpi and vci values that have been given to you by your adsl service provider to define the path of connection to the atm network backbone. Click the configuration utility...
Dsl-302g adsl ethernet modem user’s guide 10 type in these numbers in the adsl setting field and click finish. 4. The save configuration and restart system window will appear. You will be asked if you would like to save the changes you have made (the vpi and vci numbers) and restart the modem. Click...
11 modem diagnostics the configuration utility can be used to monitor the activity and performance of the modem. The four status windows are read-only with the exception of the general adsl information. Once you have set the vci and vpi values there should not be any need to change them. You can cho...
Dsl-302g adsl ethernet modem user’s guide 12 the general adsl information menu displays information on packets received and transmitted via the adsl line as well as the adsl settings. This is where you can change the vci and vpi values, as described in the previous section. The ethernet information ...
13 the advanced adsl information menu lists information about errors, signal characteristics and loop distance. The data provided in the advanced adsl information window includes: ♦ re_training – number of attempts to establish the adsl connection ♦ crc – cyclic redundancy checking, number of crc er...
Dsl-302g adsl ethernet modem user’s guide 14 a technical specifications general standards: itu g.992.1 (g.Dmt) itu g.992.2 (g.Lite) itu g.994.1 (g.Hs) ansi t1.413 (issue 2) protocol: tcp/ip data transfer rate: g.Dmt full rate: downstream up to 8 mbps upstream up to 640 kbps g.Lite: downstream up to ...
15 b dsl-302g firmware upgrade utility you can update system firmware using the dsl-302g firmware upgrade utility. To upgrade the modem’s firmware you must have installed this software on the pc you wish to use for this purpose. Install the utility by clicking the self-executing file setup.Exe locat...
Dsl-302g adsl ethernet modem user’s guide 16 in the new window, you will see the mac address of the modem and the ip address of the pc you are using. The pc and the modem must be on the same subnet for the upgrade to be completed. The upgrade utility will suggest a new ip address to be temporarily a...
Warranty and registration subject to the terms and conditions set forth herein, d-link systems, inc. (“d-link”) provides this limited warranty for its product only to the person or entity that originally purchased the product from: • d-link or its authorized reseller or distributor and • products pu...
Available if shipping charges are prepaid by the customer and upon request. D-link may reject or return any product that is not packaged and shipped in strict compliance with the foregoing requirements, or for which an rma number is not visible from the outside of the package. The product owner agre...