D-Link DSL-504G Configuration Manual - 13 14 23
5
13 14 23
tpg.com.au/support
PLEASE NOTE:
ADSL routers will by default be capable of automatic authentication. This means your router will use your credentials you
have provided to make the Internet connection. Each time your router is powered on, it will initialize this automated
authentication process after which your router will receive a public IP address (fixed or dynamic depending on your plan) and
DNS settings from TPG.
K. Click the
Exit button
L. Your router has now been reconfigured and is ready to be used
M. To browse websites, please now launch your browser
4. OPTIONAL
You router:
If you had other services setup on your router like port forwarding and you had restored your router to factory defaults
before configuring in PPPoE, please now reconfigure these functions to your current router settings.
Other Additional Services:
If you are reconfiguring your router from Layer 3 to Layer 2 PPPoE and you also had other services like web server, mail
server, VPN etc that were dependent on your old Layer3 IP address, please ensure that appropriate reconfiguration is
done to allow normal services to resume.