2 dwl-8610ap install guide minimum system requirements: • cd-rom drive • computers with windows ® , macintosh ® , or linux-based operating systems • installed ethernet adapter • internet explorer version 6.0, chrome 2.0. Safari 2.0, or firefox 3.0 and above system requirements package contents note:...
Dwl-8610ap install guide 3 hardware overview leds diag. -the light will blink during boot up system auto-check. Once the access point is ready, the light will be off. 5 ghz - when lit, the access point is operating at 5ghz. This light will blink when there is wireless traffic. 2.4 ghz - when lit, th...
4 dwl-8610ap install guide installing the hardware console port power receptor reset button.
Dwl-8610ap install guide 5 you may power the access point using one of the following methods. 1. Use the power adapter included in the package 2. Connect the access point to an external power-over-ethernet (poe) switch you may configure the access point using one of the following methods. 1. Directl...
6 dwl-8610ap install guide step 1: insert the provided wall anchors in the wall where the mounting plate will be attached. Mounting plate assembly step 2: use the provided screws to secure the mounting plate on the wall..
Dwl-8610ap install guide 7 step 3: attach the remaining screws securely to the back of the dwl-8610ap. Step 4: attach the dwl-8610ap to the mounting plate..
8 dwl-8610ap install guide your setup is complete step 5: slide the dwl-8610ap down into the grooves on the mounting plate to secure it to the plate..
Dwl-8610ap install guide 9 notes.
10 dwl-8610ap install guide notes.
Dwl-8610ap install guide 11 notes.
Technical support this guide is for first time configuration. Please refer to the user manual to learn more. U.S. And canadian customers can contact d-link technical support through our website. United states http://support.Dlink.Com canada http://support.Dlink.Ca version 1.00(ww) november 26, 2013 ...