D-Link DWL-8610AP Install Manual - Hardware Overview
Other manuals for DWL-8610AP:
Administrator's Manual, User Manual
Manual is about: DWS-4000 series access points
of
12
DWL-8610AP Install Guide
3
Hardware Overview
LEDs
Diag. -The light will blink during boot up system auto-check.
Once the access point is ready, the light will be off.
5 GHz - When lit, the access point is operating at 5GHz.
This light will blink when there is wireless traffic.
2.4 GHz - When lit, the access point is operating at 2.4GHz.
This light will blink when there is wireless traffic.
LAN1, LAN2 - Solid light when the Ethernet port is connected
to a working port, such as a router or switch. The light will blink
when there is traffic through LAN port.
POWER - The light will blink during boot up. Once solid, the
access point is ready.