1. DL manuals
  2. D-Link
  3. Switch
  4. KVM-440
  5. Quick Install Manual

D-Link KVM-440 Quick Install Manual - Product Overview

Manual is about: Product Manual

Summary of KVM-440

  • Page 2: Package Contents

    2 package contents open the shipping carton and carefully unpack its contents. Please verify if the following package contents are present and undamaged. (1) 8- port or 16- port ps2/usb combo kvm switch (4) 4-in-1 ps2/usb combo kvm cable (1) rack mount bracket kit set (1) power adapter (1) cd-rom wi...

  • Page 3: Product Overview

    3 product overview item feature description a status leds selected (red): a red led indicates that the corresponding pc is selected. Online (green): a green led indicates that the corresponding pc is online. B switch button press the button corresponding to the computer you would like to control via...

  • Page 4: Rear Panel

    4 rear panel item feature description a ps/2 mouse console port connects to the ps/2 mouse b ps/2 keyboard console port connects to the ps/2 keyboard c vga monitor console port connects to the vga monitor d computer connectors connects to the computers with the 4-in-1 kvm combo cables a b c d figure...

  • Page 5: Precautions:

    5 precautions: • please turn off computers and attached devices before installing the kvm switch. • for computers with keyboard power on function, please unplug the power cords in advance. Otherwise, the switch may not work properly. • some older computers may require you to enable usb in bios to ma...

  • Page 6: Note:

    6 you can connect the kvm switch to computers using one of the three methods shown below: a. Connect usb, ps/2 keyboard, ps/2 mouse and vga connectors to your computer. We recommend that users connect computers in the manner shown below. (figure 6) figure 6: usb, ps/2 and vga setup note: please cont...

  • Page 7: Figure 8: Usb And Vga Setup

    7 b. Connect only ps/2 keyboard, ps/2 mouse and vga connectors to your computer. (figure 7) figure 7: ps/2 and vga setup c. Connect only usb and vga connectors to your computer. (figure 8) figure 8: usb and vga setup.

  • Page 8: Cascade Chaining

    8 cascade chaining the kvm switch supports cascades of up to 3 levels. Control up to 64/256/4096 pcs from a single console. Cascaded units do not require any special configuration once connected, the kvm switches will automatically configure themselves appropriately as the master or slave. To instal...

  • Page 9: Rack Mounting

    9 rack mounting operation you can select a computer to control with the kvm switch using the front panel buttons, hotkeys, or osd. 1. Button operation press the front panel button to select the connected pc. 2. Hotkey operation please refer to the hotkey operation section in the user manual. 3. Osd ...

  • Page 10: Notes

    10 notes.

  • Page 11: Notes

    11 notes.

  • Page 12: Technical Support

    12 technical support d-link’s website contains the latest user documentation and software updates for d-link products. U.S. And canadian customers can contact d-link technical support through our website or by phone. United states telephone (877) 354-6555 world wide web http://support.Dlink.Com cana...