D-Link SECURICAM DCS-7110 Quick Installation Manual - Mounting The Camera
D-Link DCS-7110 Quick Installation Guide
12
Attach the Camera to the Mounting Bracket
Step 1:
Locate an area on the wall or ceiling which is
capable of supporting the weight of the camera.
Step 2:
Use a drill bit to make the holes. Insert the
wall anchors and affix the mounting bracket using
the screws provided.
Step 3:
The camera cables can be installed through
a separate large hole drilled in the wall, or by using
an external cable conduit.
Mounting the Camera
Step 2:
Use the bolt provided to attach the camera shoe to the mounting bracket and adjust
the vertical orientation of the camera.
Step 3:
Use the hex key provided to loosen the bolts
and adjust the vertical / horizontal orientation of the
camera to the desired field of view. Firmly tighten the
adjustment bolts and lock it into place.
Step 1:
Use the provided screws to attach the camera shoe
to the underside of the camera.