D-Link Vonage Quick Start Manual - page 9
Step 4:
Connecting Your Phone
Step 4: Connecting Your Phone
15
1.
Plug the Vonage telephone cord into your phone or unplug
your existing phone cord from the wall and plug it into the
phone port directly on the Vonage Device.
NOTE: If not done so already, disconnect phone from wall.
2.
Plug the other end into the
Green Phone 1 Port
on the
back of the Vonage Device.
NOTE: Make sure the phone light is solid.
This is what your set up should look like with an existing modem:
This is what your set up should look like with both an existing
modem and router:
If you do not hear a dial tone,
proceed to Troubleshooting
on page 17.
14
3.
Pick up your handset.
NOTE: When you pick up your phone to check for a dial tone,
the phone light will blink.
If you hear a dial tone, congratulations!
You’ve set up your Vonage service correctly, and can
now start making calls. To configure your voicemail and
other included services features, simply login to your
web account at www.vonage.com.
Vonage Device
Vonage Device
Vonage Device
Existing Modem
Existing Router
Phone
Computer
Computer
Existing Modem
Phone